GURU PRASATH DAMODARAN, B.E Mech

Sharjah, UAE

Mobile: +971-*********

Email: adeb0v@r.postjobfree.com

PIPING DESIGN ENGINEER

* ***** ** **********

CAREER OBJECTIVE

To be one of the most vital human assets of the organization through a challenging and rewarding career in engineering design and development with diversified responsibilities that will permit rapid professional improvement as well as personal development.

PROFESSIONAL OVERVIEW

High-performing, energetic and self-motivated Professional with around 6 years of experience on FEED and Detailed Design Projects in Oil & Gas, Petrochemical & Refinery sectors for major clients in UAE and Saudi.

B.E in Mechanical Engineering having well developed skills in Piping using Intergraph Smart Plant 3D, CAESAR II software.

Conversant with ASME/ASTM/API Codes and Standards

Conversant with COMPANY Standards for major clients like ADNOC Onshore / Offshore / Refinery / Gas Processing, Saudi Aramco etc.

ACHIEVEMENTS

Appreciated for bring a part in the Development of Work Procedure for Sulfur Jacketed Run-down lines which reduced Errors and site queries.

Played a vital role for layout finalization of Claus Reactor and Exchangers.

Involved in Development and Design of Claus Process Area piping in Jazan SRU project.

Main focal in piping for Ruwais: HP & LP Flares and Common Burn Pits Upgrade, Habshan Direct Depressurization.

AREAS OF EXPERTISE

Piping Design Jacketed line Technical Bid Evaluation Datasheets

Material take-Off CAESAR II PMS Piping Calculation

Project Management Lists & Schedule Pump routing Exchanger routing

Stress Report Codes and Standards Column routing Supports

Smart Plant 3D V (10.0) Bids and proposals Vendor Drawing Oil & Gas, Refinery

Site Visits & Site survey

EMPLOYMENT CREDENTIALS

Currently associated with ATKINS, Member of the SNC-Lavalin Group, Sharjah - UAE as Piping Design Engineer, since October 2019 - Present

ISCCO (Integrated Specialized General Contracting Company W.L.L), Abu Dhabi- UAE as Piping Design Engineer, since May 2018 – October 2019

Saipem India Projects LTD, Chennai as Piping Design Engineer, since July 2014 – April 2018. ROLES & RESPONSIBILITIES – Layout, Material & Stress

Review contract documents, identifying action items and incorporate the same in design documents / Drawings.

Review / Prepare piping design basis.

PMS preparation.

Plot plan finalization considering Lospe standards with optimum design.

Preparation of Data Sheets for valves, Review of valve GAD.

Technical Bid Evaluation for Piping items including Long Lead Items.

Review of Equipment Layout for Exchangers, columns, vertical & horizontal vessels, Pumps.

Nozzle Orientation Study for Columns and vessels.

Layout Study for Main Pipe Rack, Claus reactor, Heat Exchangers, pumps, columns, Utility station, Steam & condensate manifold.

Sound knowledge in handling Study of Equipment, Air coolers, Heat Exchangers, columns, valve.

Good Knowledge in sulfur jacketed run-down lines, partial jacketed line routing using SP3D.

Identifying the Stress critical lines from the P&ID and Preparation of Stress critical line list as per the Stress Specification.

Modelling and data input of stress system in Caesar II

Stress analysis of critical systems in CAESAR II.

Prepare stress report, Stress Isometrics and extract Output results.

Non-critical lines supporting and visual analysis of all non-critical lines.

Interaction with various departments like civil, mechanical, Process, Instrumentation etc.

Witnessed Hydrotesting and Pneumatic testing of Piping.

Testing and Commissioning of Flare Packages.

On-site problem resolution.

Submitting Technical Query to client wherever deviations observed.

Review and co-ordination with vendor for any clarification/ requirements.

Sound knowledge on Typical Drawings, Plot Plans, Isometrics, GAD’s.

Effective participant in Technical discussions with client.

Review of Process PID in line with the vendor PID.

Submitting material approval Request to company by checking MTC are as per Company requirement / Approved Manufacturer.

Preparation of method statements for Company approval for Tie-In activities.

Effective participant in Risk Assessment meeting with client.

Review of Flare vendor drawings for Tips and pilots/ FFG skids / Valve GAD and providing comments as per project requirement.

Effective participant in client model review and resolving client comments in 30 %, 60 %, 90 % model review.

Participated in various kick off meeting with client & vendors.

Review of process Data sheets, Mechanical Data sheet and vendor Drawings for equipment’s.

Site visits and site survey for Proposals.

IDC check on other discipline deliverables.

Well conversant with various international standards & codes used in piping design.

Good knowledge of ASME, ASTM & API codes.

Attending weekly Progress review meeting with client. PROJECTS DETAILS

ATKINS, Member of the SNC-Lavalin Group, SHARJAH

Job : EPC WORKS FOR FACILITY INTEGRITY EXECUTION PROJECT IN DAS ISLAND Client : ADNOC Offshore

Contractor: TARGET Engineering Construction Co. LLC (TARGET) Unit : Zakum Plant, Umm Shaif Plant.

Scope : The main objective of the project is to replace the corroded section of piping in US LP Separators Gas Outlet Headers, US LP Separators Gas Outlet, Combined Gas Header, ZK HP Scrubber Off gas Header, 30” US Stripper Off gas Header, US HP Separator Inlet Oil Header. In order to reduce the shutdown time and continuous operation, the same in achieved by installing Temporary header and piping. Role : Piping Engineer

Job : UMM AL DALKH Early Production Combined Concept And Feed Project, Abu Dhabi, UAE Client : ADNOC Offshore

Unit : UMM AL DALKH, South Area Field

Scope : The project involves supply of treated Sea water from CPC to WHP-15 through a new 8” subsea pipeline. Treated Sea water will be injected in to 2 new and 2 existing water injection wells at WHP-15. Well fluid produced from the 3 new oil producers (ESP wells) will be combined with current production from the 2 existing ESP wells at WHP-15 and co-mingled with current well fluid production received from WHP-16. The combined production will be routed to CPC through the existing 8” oil production pipeline between WHP-15 and CPC. New Oil producers at WHP-15 will be ESP wells for which power is supplied from CPC through existing 22kV subsea cables.

Role : Piping Engineer

ISCCO- EPC CONTRACTOR, ABU DHABI

Job : Habshan: Habshan Direct Depressurization (HDD) Th-F Trunklines Client : GASCO (Abu Dhabi Gas Industries Limit)

Consultant: MUC Middle East

Unit : GASCO Habshan Facilities

Scope : The main Objective of HDD project is to minimize emissions released into the environment. The relevant emissions are caused by venting or flaring of process gas contained in the existing reinjection Trunk lines during scheduled outages. Instead of release to atmosphere, the process gas shall be utilized by direct depressurization into the sales gas network at Habshan. The project involved two units OGD-I & OGD-III, interface with ADCO facility and GASCO pipeline with six hot tap tie in’s.

Role : Piping Engineer

Job : Ruwais: HP & LP Flares and Common Burn Pits Upgrade Client : GASCO (Abu Dhabi Gas Industries Limited)

Consultant: Amec Foster Wheller

Unit : GASCO Ruwais Facilities

Scope : The project involved Modification of Burnpit and Revamp the flame failure detection, ignition and flame front generators of HP, Acid Gas, LP Flares of Trains 1 & 2 and the two common Burn pits also includes replacing the pilot burner & tube assemblies made from appropriate Material to withstand rigorous service conditions.

Role : Piping Engineer

Job : Ruwais:Tie-INS during Turn around for closed process drain system in condensate units Ruwais Refinery Client : TAKREER (Abu Dhabi Oil Refining Company)

Consultant: Neste Engineering solution

Unit : ADNOC Refining (East) Ruwais Facilities

Scope : Carryout stress analysis for Exchanger piping, Heater lines and recommend necessary supports, and to check the nozzle allowable loads, Study the Tie-INS (195 Number) for the drains points required during the closed process drain system in condensate units. Role : Piping Engineer

Saipem India Projects Pvt Ltd, INDIA

Job : Jazan Integrated Gasification Combined Cycle Project-Sulfur Recovery Unit Client : SAUDI ARAMCO

Unit : Sulfur Recovery Unit

Scope : This is a US $2.5 billion project which involved in design and development of SRU and Storage facilities. The Sulfur Recovery Unit for the Jazan Integrated Gasification Combined Cycle

(JIGCC) consists of 3 trains for 3 x 50% of the total capacity and is designed to recover a Nominal 1018 MTD (Thousand Ton per day) of liquid sulfur total. The major scope was involved in detail engineering of Claus Section, Shell Sulfur Degassing, Shell Claus Off-gas Treatment (SCOT), Thermal Incinerator, & Tank farm area. The project involved with around 30,000 lines. Role : Piping Area Engineer

Job : Hawiyah Gas plant expansion (Proposal)

Client : SAUDI ARAMCO

Unit : Dehydration and Due point control unit, Gas Treating facility, sales Gas compression unit. Scope : The project involved with both green field and brown field project scope. In which TEG package, compressor station, sales gas units and corresponding plot plan finalization and line routing along with the Layout MTO, PID MTO was the major task.

Role : Piping Engineer

Job : TCO (TengizChevroil GAD project)

Client : TCO

Scope : The project involved with generation of GAD drawings for the existing facility. In which around 4000 GAD drawings were submitted to client. The project covered process Area and pipe racks. Role : Piping Engineer

Job : BU HASA INTEGRATED FIELD DEVELOPMENT PROJECT, ABU DHABI (Proposal) Client : Abu Dhabi National Oil Company

Scope : To develop capacity for Shuaiba B, A and H-North Zones and new BP wells to increase and sustain the production plateau in Shuaiba to 560 MBOPD contributing towards 650 MBOPD across Bu-Hasa Asset. Role : Piping Engineer

TECHNICAL COMPETENCY

Software Skills:

SP3D.

CAESAR II

Smart plant Review, Navisworks Freedom

AUTO CAD, Micro Station

Proficient in using MS Office Applications

Strengths at work:

Focus on quality and meet the Schedule with due quality

Quick adapting to New Technical/ Software needs

Has excellent communication skill both written and verbal

Has the ability to work with minimum supervision.

Has the ability to prioritize workload according to deadlines.

A self-motivated individual and a good team player

Has good work ethics

EDUCATIONAL CREDENTIALS

B.E (Mechanical Engineering) with First class in 2014 from Anna University. PERSONAL DETAILS

Date of birth : November, 3 1992

Father Name : Damodaran

Nationality : Indian

Marital Status : Married

Languages known : English, Tamil, Telugu, Malayalam & Hindi. Address : Al Qasimia, Sharjah, UAE.

Contact No : +971-*********

Passport Number : M8471787

Date Of Expiry : 26/04/2025

Contact this candidate