Electrical Engineer, ETAP, SPEL, Dialux, AutoCAD

OBJECTIVE:

Ambitious, organized Senior Electrical Engineer with 14 years of experience in Oil & Gas industry, looking for better prospects, where I can be a key team member, making an important contribution to the Electrical Department and strategy of a growing company.

PROFILE:

FEED & Detailed Engineering of Electrical System for Power plants, Onshore Petrochemicals, Refineries and Offshore Oil & Gas projects in leading EPC viz. Wood plc. UAE, China Petroleum Engineering. UAE, Dodsal Engineering and Construction Limited. UAE, Amec Foster Wheeler India. Chennai, Valdel Engineers & Constructors Limited. Bangalore, Nasser Al-Hajri Limited. Saudi Arabia.

Experience in following green field and brown field projects as Senior Engineer:

i.Refineries & Petrochemical Plants viz. Polypropylene, Sulphur recovery unit, crude distillation/recovery unit, Vacuum residue into high quality of oil component.

ii.Offshore fixed platforms with Oil & Gas processing unit, accommodation facilities with gas turbine & diesel generation.

Exclusive exposure to LV/HV Switchgear, Transformers, HV/LV motors, Power Management System (PMS), DC systems.

Conversant with Industry codes & standards including IEC, IEEE, ARAMCO, ADCO, KOC & DEPs.

Wide international experience, presently working in Wood plc Dubai, and worked in Saudi Arabia & India for FEED and detail engineering projects.

Self-motivated to achieve management objectives through hard work and loyalty with clear understanding of co-ordinated efforts in a team-work concept.

Computer Proficiency:

ETAP, Electrical Transient Analyzer Program (Load Flow, Short Circuit, Motor Starting, Relay Coordination, Transient Stability & Arc Flash Analysis)

Smart Plant Electrical (Equipment Schedule, Cable Sizing, Schedule and take-off, Single Line Diagram)

Smart Plant Review (3D Model Review)

Dialux (Lighting Calculations)

AutoCAD & MS Office

ACHIEVEMENTS:

Successful completion of multiple ETAP system studies, Protection coordination Studies, Transient Stability Studies and Arc Flash studies for BGC projects.

Successful completion of ETAP Power System Studies & Relay Coordination studies independently for new construction Gathering Centre-31(Kuwait) and Various Basra Gas Company (Iraq) Projects with Client Satisfaction.

Presentation has been demonstrated about ETAP system studies to KOC asset team & AMEC project management team at PMT Kuwait Office.

Successful completion of electrical database for multiple projects by using SPEL software.

PROFESSIONAL EXPERIENCE:

From May 2018 to Present : WOOD PLC, DUBAI

Position : Senior Electrical Engineer

Project Description : Basra Gas Company, Iraq Projects

Basra Gas Company currently handles the gas produced in four oil fields in the south of Iraq included in the License Round 1 (LR1) held be the Iraqi government. These fields are West Qurna, North Rumaila, South Rumaila and Zubair. Currently much of the associated gas produced by the LR1 operator is flared. BGC’s own growth strategy involves gathering the currently flared gas and developing grater processing capacity for increasing volumes of Gas and Natural Gas Liquids (NGL’s). Some of this capacity expansion will be achieved via the rehabilitation of existing facilities at the North Rumaila and Khor Al Zubair NGL Plants (NR NGL and KAZ) and some via new developments, with the ultimate aim of reaching 2 BScfd gas productions.

From Nov 2017 to May 2018 : CHINA PETROLEUM ENGINEERING (CPE), DUBAI

Position : Electrical Engineer

Project Description : BAB Integrated Facilities Project (BIFP, ADCO Project)

The field is sour with high H2S content. The wells to the northeast of Bab field exhibit generally higher H2S content than wells to the southwest.

Bab injects aquifer water into the producing zones as the pressure maintenance strategy. Associated water will be injected back to Thamama-B reservoir under ongoing project. Associated gas separated at BCDS is delivered to GASCO for processing and processed Crude Oil is pumped to ADCO export network.

From Jan 2015 to Nov 2017 : DODSAL ENGINEERING & CONSTRUCTION LIMITED, DUBAI

Position : Senior Electrical Engineer

Project Description : Kuwait Oil Company, Construction of Gathering Centre-31

A large-scale EPC contract for new Oil refinery to increase oil production to 1MMBOPD by the year 2015/2016 and keep the production at this plateau rate for at least 5 years. The present NK wet crude capacity is around 760 MBOPD and new plant is required to meet this planned target.

Project Description : Habshan Sulphur Granulation Project, GASCO

The Emirates oil contains between 1 and 2 percent sulphur while it’s gas contains between 0.5 percent an

1.5 percent. State energy giant Abu Dhabi National Oil Company (ADNOC) plans to increase oil production capacity to 3.5mbpd by 2019 from its current capacity of 2.7mbpd.

From Jul 2012 to Dec 2014 : AMEC FOSTER WHEELER LIMITED, CHENNAI

Position : Electrical Engineer

Project Description : TOTAL Global, Total Optara Refinery

The Total Optara project is an extension/adjustment of an existing oil refinery. The refinery’s total licensed capacity is 20.5 million tons of crude oil per year. The new/adjusted installations provided by the OPTARA project convert the vacuum residue into high-quality oil components. These components are then processed further in the existing installations.

Project Description : Sabic OL6 Energy Improvement Project

The Cracker is fed raw material gases and liquids and cracks apart their components at temperatures of about 1,000 degrees before cooling them to below -180c to produce ethylene, propylene and butadiene.

Project Description : Shell Gulf Coast GTC Project

Front End Engineering Design for new electrical distribution system.

From Jun 2011 to Jul 2012 : VALDEL ENGINEERS & CONSTRUCTORS LTD, BANGALORE

Position : Electrical Engineer

Project Description : Y-Grade Fractionation Unit.

United States Petrochemical capacity expansion projects - Projected to increase domestic demand for ethane by nearly 600,000 barrels/day; propane by nearly 200,000 barrels/day. After being extracted in the field, mixed NGLs, sometimes referred to as “Y-grade” or “raw NGL mix,” are typically transported to a centralized facility for fractionation where the mixed NGLs are separated into discrete NGL products: ethane, ethane-propane mix, propane, normal butane, isobutene and natural gasoline.

Project Description : Flue Gas Desulfurization Unit.

Flue-gas desulfurization (FGD) is a set of technologies used to remove sulfur dioxide (SO

2) from exhaust flue gases of fossil-fuel power plants, and from the emissions of other sulfur oxide emitting processes.

From Sep 2007 to Mar 2010 : NASSER AL-HAJRI COPORATION LIMITED, SAUDI ARABIA

Position : Electrical Engineer

Project Description : Saudi Kayan Olefins Project.

Project Description : Ibn Zahr PP III Project.

Engineering Services for 13.8/4.16kV and 480V system power distribution system. Total power consumption of the project is 25MVA. Scope includes Reactor, Blending silo, Pellet Building and Bagging System.

From Dec 2005 to Aug 2007 : MAHINDRA CONSULTING ENGINEERS LIMITED, CHENNAI

Position : Graduate Electrical Engineer

Project Description : Shriram Power Projects.

DUTIES AND RESPONSIBILITIES:

Front End Engineering (FEED):

Responsible for following activities:

Review and verification of electrical conceptual design

Selection of electrical equipment based on techno commercial study with consideration of design, operational, optimization and standardization requirement.

Electrical load study and analysis

Overall Single line diagram for 33kV, 11kV, 6.6kV & LV Switchboards, MCCs & Distribution Boards.

Electrical System Studies viz.. Load flow, Short circuit & Motor Starting Study

Electrical equipment sizing calculations viz. Transformer, Generator, Switchboard, AC/DC UPS, Battery Sizing & Cable sizing as per International codes & standards.

Hazardous Area Classification Layouts.

Electrical Layouts (Earthing, Lighting, Cable routing & Substation)

Detail Engineering:

Responsible for following activities:

Electrical load study and analysis

Overall Single line diagram & SLD for 132kV, 11kV, 6.6kV & LV Switchboards, MCCs & Distribution Boards

Electrical Power System Studies: Load Flow, Short Circuit, Motor Starting, Transient Stability & Harmonic analysis using ETAP software.

Preparation of Protection Relay Coordination Study and Setting Schedule using ETAP software.

Preparation of project electrical database, switchboard schedule, cable sizing, cable schedule, cable take-off, single line diagram and schematic diagram by Smart Plant Electrical Software (SPEL)

Electrical Equipment Sizing Calculations: Transformer, Generator, AC/DC UPS, Batteries, Switchboard and Power Cables

CT/VT Sizing Calculation: Overcurrent Protection (Burden, Accuracy Limit Factor) & Differential Protection (Knee point voltage, Magnetizing Current)

SAFOP/HAZOP workshop participation as Senior Engineer which includes discussion and finalization of technical safety and operational aspects and close out reports.

Selection of suitable electrical equipment’s for Hazardous location and Area Classification Layout.

Earthing and Lightning protection calculation as per IEEE & IEC Standards.

Preparation of lighting calculation by Dialux software.

Preparation of electrical equipment’s datasheets: Switchgear, Transformer & Motors for Onshore and Offshore applications.

Procurement activities: Material Requisition, Technical Queries & Technical Evaluation of Electrical equipment’s such as Distribution Transformers, Switchgears, Motors & Bulk items.

Execution of electrical engineering activities as per project specification, international standards, within the budget man-hours and timely completion.

Support detail drawing for electrical equipment (DB, Light Fixtures, Control Station, Earthing, Cable tray) as input to fabrication yard.

Review/Approve the activities of assigned personnel and contractor on all electrical engineering related activities & vendor documents as per project requirements.

Participate in equipment Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) and preparation of Minutes of Meeting and provide the support for closing the action points.

Coordinate with site execution team, meetings to provide the technical guidance and resolve the site technical query from the contractor and expertise such that project goals are clearly understood to minimize the delays.

Perform supervisory functions at the level established by management for the position to ensure all engineering & construction activities are as per company standards & scope of work.

Selection of motor rating based on pump specification and kWh calculation based on diesel consumption.

Weekly & monthly work schedule, resource requirements and progress measurement system to ensure the completion of the project within budget and report the important issues such as deviations, delays to management to support for corrective action.

PROFESSIONAL QUALIFICATION:

Degree / Discipline

Year of Passing

University

% Marks

Class

Bachelor of Engineering (Electrical)

2005

Anna University

68%

First

TRAINING:

ETAP Software (ETAP 114 Power System Engineering) – OTI,

Design Workstation

Smart Plant Electrical (SPEL)

Work Permit Receiver – Ibn Zahr PP III Project,

Saudi Arabia

PERSONAL DETAILS:

Father Name : Mr. M. Mohamed Ismail

Gender / Marital Status : Male / Married

Nationality / DOB : Indian / 08th May 1984

Language : English, Hindi, Malayalam and Tamil (Native)

Present Address : Flat No: 5, Building No: 6,

Hamriya, Bur Dubai,

United Arab Emirates

Passport No. : M4901844

Passport Validity : 25-Dec-2024

DEDECLARATIONI

I hereby declare that the information furnished above is true to the best of my knowledge and belief

Date: M. MOHAMED RIYAZ

Contact this candidate