* * * * *

CAREER OBJECTIVE:

ACADEMIC PROFILE:

CAREER SUMMARY:

CURRICULUM VITAE

MOHAMED NASWAN

QA/QC ENGINEER / INSPECTOR (PIPING/WELDING/NDE)

B.E. (Mech), CSWIP 3.1, ASNT LEVEL II

E-mail: ade13f@r.postjobfree.com Ph.: +91-967*******, +91-908******* LinkedIn Profile: https://www.linkedin.com/in/mohamed-naswan/ Skype ID: naswankukje Career objectives focus on application of experience to new areas of challenge, increasing exposures technology & business practice. Oil and gas work experience allied to technical & communication strength utilize to excellent advantage on a range of project development assignments worldwide challenging career where I can contribute my competencies in oil and gas field.

BE Mechanical Engineering – Year 2015 / First Class

CSWIP 3.1 Welding Inspector (Cert no: 104921).

Non Destructive Testing certification Level II from (MSME Development Institute):

Ultrasonic Testing (Cert No:2715/UT)

Ultrasonic Thickness Testing (Cert No:2716/UTT)

Penetrant Testing (Cert No:2711/PT)

Magnetic Particle Testing (Cert No:2712/MPT)

Radiography Testing (Cert No:2713/RT)

Radiographic Film Interpretation (Cert No:2714/RTFI)

Visual Testing (Cert No:2717/VT)

Having 5+Years of working experience in the field of Quality Assurance and Quality Control Various Projects like, Oil and Gas, Petrochemical and Power Projects in India & Abroad. Hands on experience Piping and Structural of pre welding, in process welding and post welding, surveillance, inspection and supervision in workshop as well as at field of all welding operations and associated welding variables for butt, Fillet and Socket welds on materials such as CS, AS,LTCS, SS, etc; made with welding processes such as SMAW,GTAW, GMAW, FCAW, SAW, etc; using essential aids, as per applicable construction and relevant standards; including sign off daily welding and NDT reports, Witnessing all applicable NDT(VT,PT,MT,RT&UT).

Provide Quality assurance and Control Mechanisms as well as improve safety, integrity and Reliability; by proactive surveillance, inspection for construction projects as per mandatory documents, Client Specification and reference drawing, applicable standards and codes of practice; Such as but not limited to ASME Sec IX, ASME B 31.3, ASME B 31.1, ASME SEC II A, ASME SEC II C, ASME SEC V. 2 P a g e

SHUT DOWN EXPERIENCES:

DUTIES AND RESPONSIBILITIES:

Organization : M/s NBTC Company Ltd., Kuwait

Company : Kuwait Integrated Petroleum Industries (KIPIC) Client : FDH (Fluor, Daewoo, Hyundai Joint Venture) Project : AL ZOUR Refinery Project

Designation : QC Welding Inspector (KIPIC Approved) Duration : Jul 2019 to Jun 2020

Organization : KUKJE Plant Co Ltd., Kuwait

Company : Kuwait National Petroleum Company (KNPC) Client : JGSK (JGC, GS E&C, SK E&C Joint Venture)

Project : CLEAN FUELS PROJECT

Designation : QC Inspector (piping/welding/NDE)- (KNPC Approved) Duration : Oct 2015 to Apr 2019

HCR/VR Block & FUP MRTA / UNIT 83 Revamp project.(KNPC)

FCC/MAFP Block & Area 4, MAFP / UNIT 46 Revamp project.(KNPC)

Verify and Follow quality control documentation such as Project Specification, Inspection and Test. Plans (ITP), Quality Control Procedure (QCP), Method Statements, Work Instructions and ensuring Inspection Records/Test Certificates are available prior and during work commencing.

Perform Material Receiving inspection and ensure traceability of material in accordance with Certified Material Test Report (CMTR) and Codes.

Witness Procedure Qualification Test (PQR) by using Proposed WPS and Welder qualification test (WQT) by using approved WPS, Specification, Codes such as ASME Sec IX, AWS D 1.1 and etc.

Preparation of Welders job card.

Witness Welding Consumable receiving Inspection and review Certified Material Test Report.

Monitored welding consumable control and it’s storage at construction site and shop.

Ensure calibration of welding equipment, instruments and etc.

Witnessing hook up and Tie-in activities like existing line Tie-in, replacement of tie-in spools and etc.

Checking weld joint preparation, fit up, alignment & dimensional inspection as per technical drawings. such as but not limited to P&ID, Isometric drawings, General arrangement drawing, Fabrication drawings, As build drawings and etc.

Co- ordination with Contractor and client inspector.

Inspect utilization of WPS, Welder, and Welding Consumables.

Inspection of calibration for Welding Equipment’s and etc.

Co-Ordinate with NDT team for carrying out the required NDT as per the project scope of work.

Monitoring all welding activities as per approved WPS.

Monitor/Review the Pre heat activities and Reports PROFESSIONAL EXPERIENCES: (5 + Years)

3 P a g e

COMPUTER SKILLS:

Checking Purging level for SS material by using Purging monitor.

Witness of NDT like DPT (Bevel, Root, Final) for Tie-in joint.

Check and verify that distortion control in the process (sequence and balance welding) welding technique, heat inter pass has been carried out.

Preparation of Daily Inspection reports (DWIR).

Weld visual inspection (Including Tie-in joint, Repair joint).

Offering NDT as per client requirement & line class.

Witness/Monitor/Review NDT Such as Penetrant Test, Magnetic Particle Test, Pad Leak Test, Hardness Tests, Ferrite Test and Positive Material Identification.

Selection of joints for RT as per project requirement

Review of Radiographic films.

Monitor/Review the PWHT activities and Reports

Monitoring the performance of welder’s.

Engaged in negotiating and controlling welders Repair rate and maintaining welders’ map.

Preparing Packages for Hydro-test/Pneumatic test of Piping.

Conduct walk-through, issue punch A, ensure the require punch close before Hydro test.

Issue of Non-conformance reports (NCR) & Verification of Corrective / Preventive action

Resolve problems encountered during construction, identify the root cause for the problem and notify the Construction team for the course of action.

Reporting to QA/QC Manager and liaising with Construction Manager on day to day site activities pertaining to Quality Management.

Analysis of failures, solving the same and providing Technical supports for elimination / reduction of defects / distortion and improving the productivity

Piping pre-installation and internal cleaning inspection.

Inspection of flange joints, threaded joints and valve installation.

Conversant with International Codes like ASME section IIA,ASME SEC IIC, ASME SECV, ASME SEC VIII, ASME SEC IX, ASME B31.3, ASME B31.1, ASME B 16.5, AWS D1.1.

Inspection of Bolt torqueing

Witnessing Hydro test/ Pneumatic test activities on site Test Pack with project requirements and approved Drawings.

Clearing of B punches before re-instatement

Checking equipment preservation after hydro test/ Pneumatic test.

Inspection of ventures, flow orifice plate & restriction orifice installation.

Inspection of pipe supports.

Inspection of piping re-instatement.

Inspection for Air blowing and lube oil flushing cleaning

Preparation of inspection report and work completion report i.e. Dossier for client submittal.

Coordinate with the auditors during site audit and shall initiate necessary, Corrective, preventive actions against the audit findings

Final walk down for mechanical completion with contractor and client.

Working Knowledge of Auto-Cad designing & drawing.

Working Knowledge of MS Office Suite (Word, Excel, Access, PowerPoint).

Working Knowledge of Management software’s like TOMAS and C-Works. 4 P a g e

DECLARATION:

Permanent Address : 3/73, West Street,

: Nidur-Neivasal (P.O.),

: Mayiladuthurai (TK)

: Nagai (Dist)-609203.

Father Name : Abdul Aleem

Date of birth : 03-Sep-1993

Marital status : Single

Religion : Muslim

Languages known : English, Hindi, Tamil & Malayalam Driving license : Valid (INDIA)

Passport number : L8000229

Date of passport issued : 20-03-2014

Date of passport expiry : 19-03-2024

I hereby declare that the particulars mentioned above are true to the best of my knowledge and belief. Place: Yours Faithfully,

Date:

(Mohamed Naswan)

PERSONAL INFORMATION:

Contact this candidate