ROWEL VALENTIN A. LUCINA

New Slata, Doha Qatar

+974******** / +974********

addywa@r.postjobfree.com / addywa@r.postjobfree.com

PERSONAL INFORMATION:

Age: 43

Date of Birth: February 14, 1977

Civil Status: Married

Gender: Male

Citizenship: Filipino

EDUCATIONAL BACKGROUND:

Electrical Technology

National College of Science & Technology

San Fernando City, La Union

March 1995 – April 1997

CREDENTIALS:

SAP ERP

CAFM Archibus

BMS

NFPA

PMAS

PICWS

PELCO SS/ACS

IOSH

NEBOSH

SUMMARY PROFILE:

Total years of Experience: 20 years

OBJECTIVE:

To provide excellent service and innovative strategies for the welfare of the company and be the one who keeps the standard; rules and regulations of the company.

To seek challenging and responsible position with a company that will utilize my professional and intellectual skills and potentials and provide opportunities for continuing professional growth and advancement.

TRAINING AND SEMINARS ATTENDED:

CALIBRATION FOR PROCESS INSTRUMENTATION (CPI)

Meralco Foundation Institute Pasig Metro Manila, Philippines

HANDS ON OPERATION TRAINING FOR HONEYWELL DCS SYSTEMS

Petrokemya Olefins III, Jubail, KSA

PERMIT IN CHARGE WORK SITE (PICWS)

GASCO Habshan & Bab Gas Plant Abu Dhabi, UAE.

INERGEN, CO2 & HALON SYSTEM TRAINING

GASCO Habshan & Bab Gas Plant TYCO WORMALD, Abu Dhabi, UAE.

FIRE & GAS PLC MONITORING SYSTEM TRAINING

TYCO WORMALD, Abu Dhabi, UAE.

H2S BREATHING APPARATUS FAMILIARIZATION

Qatar Petroleum Dukhan DGL Project Qatar

RIGHT WAY TO MANAGE AND ELIMINATING WASTE THROUGH TEAMS by CONWAY MANAGEMENT

Qatar Foundation Doha, Qatar

HANDS ON OPERATION & MAINTENANCE FOR BMS TREND 963

Weil Cornell Qatar Foundation Doha, Qatar

HANDS ON OPERATION & MAINTENANCE FOR BMS HONEYWELL EBI

Qatar Foundation Doha, Qatar

HANDS ON OPERATION & MAINTENANCE FOR GENT 34000/VIGILON FIRE ALARM SYSTEM

Qatar Foundation Doha, Qatar

HANDS ON OPERATION & MAINTENANCE FOR VARIABLE FREQUENCY DRIVES by HAWARD TECHNOLOGY MIDDLE EAST

Qatar Foundation Doha, Qatar

INTRODUCTION TO BEARINGS & BEARING FAILURES By HAWARD TECHNOLOGY MIDDLE EAST

Qatar Foundation Doha, Qatar

EMOTIONAL INTELLIGENCE – APPLICATION AT WORKPLACE by HNI TRAINING & COACHING

Qatar Foundation Doha, Qatar

PROBLEM SOLVING AND DECISION MAKING by BURTON CONSULTANCY

Qatar Foundation Doha, Qatar

HANDS ON MULTIGUIDE GENERAL PRODUCT TRAINING FOR SIPARK SSD SYSTEM & SIPARK PMA SYSTEM by SIEMENS

Qatar Foundation Doha, Qatar

IELTS – ACADEMIC INTERMEDIATE LEVEL by BRITISH COUNCIL

Doha, Qatar

INSTITUTION OF OCCUPATIONAL SAFETY AND HEALTH (IOSH) – MANAGING SAFELY

Doha Industrial Safety Services Doha, Qatar

NEBOSH IGC 1, 2 & 3

Doha Industrial Safety Services Doha, Qatar

PROFESSIONAL EXPERIENCE:

Qatar Aluminium Company LTD. Mesaieed Qatar

Central Maintenance/Technical Department

Facility Coordinator (June 2019 – June 2020)

Job Description and Responsibilities:

Preparation of weekly Pre-plan activity/task of support contractor according to new and pending Work Order raised by area owner or end user.

Fully engaged in operating of SAP system in accordance of priority pertaining on Fire & Gas PM and CM of the entire Aluminium Plant.

Fully responsible on Fire & Gas PM/CM planning based on annual planned plant wide.

Well organized on weekly, monthly coordination meeting with other discipline like HSSE, Mechanical, Electrical, Civil, HVAC, Security with regards to Fire & Gas system availability and accuracy on the entire plant.

Assist Engineering Department on reviewing of any variation, modification or new projects execution on the plant pertaining to Fire & Gas System.

Responsible on contractor welfare status and safety on working area by conducting tool box talk before commence work.

Responsible on revising the OPL/SOP in accordance with new revision number released by the management.

Assigned as PRW to review & approve the support documents like JRA and Method of Statement attached on Work Permit.

Qatar Foundation for Education Science & Community Development, Doha Qatar

Operation & Maintenance Directorate

CIEM Department

Facility Coordinator (April 2005 – June 2017)

Job Description and Responsibilities:

Engineering, Commissioning & Handover – Participation in Design Review Meetings, FEED,Facilitating Workshop meetings for Detailed Engineering activities of Process Industries, Building Automation as per the project requirements, RFITs, Design Change Requests, Handling technical issues with customers, Project Management Consultants, Contractors, coordination with commissioning Department with vendors & OEM’s and Standardizing the automation solution for industrial application.

Handling warranty issues, preparing schedules & agenda for Trainings, Conducting Site Acceptance Tests, Participating in Factory Acceptance tests for BMS/FAS/Security System projects, providing assistance in CMMS/CAFM (Archibus) coding for scheduling Maintenance of Equipment/systems.

Project Execution: Pursues long term business for existing client. Propose the most effective solution for the customers and the organization.

Preparation of technical studies and engineering of BMS/FAS/Security System (CCTV/ACS) offers & tenders. Responsible for successful & efficient execution of projects in terms of quality, cost and schedule

Project Management and New Facilities: Performing minor modification to major revamp in BMS/FAS systems in existing projects, Reviewing Engineering Submittals, Technical Assessments, Monitoring and control of execution, Cost control, Resource Management, Project schedule monitoring, initiation of Handover to the operations and maintenance team. Organize trainings for newly installed systems.

Report generation and preparation of standard work instructions for BMS/FAS/Security systems and procedures to carry out the testing.

Close supervision on Monthly, Quarterly, Semi- Annual and Annual PM/CM activity for BMS/FAS/Security System (CCTV & ACS).

Prepared Customer satisfaction survey on a monthly basis to keep track of customer complaints and attend them on a timely manner.

Tyco Fire & Security LLC., Abu Dhabi UAE

Project: Gasco, Habshan & Bab Plant / TAKREER

Client: ADNOC

Maintenance Supervisor (June 2004 – March 2005)

Job Description and Responsibilities:

Responsible on PTW preparation, endorsement, execution & closed out for work completion.

Maintenance of Fire & Gas monitoring system such as General Monitors, Zsieger, Simplex, Series;4100C., Systron Donner, How panel, Consillium, Siemens, Cerbirrus, Wormald, etc.

Carry out daily basis monitoring checks on fire & gas PLC server’s monitoring systems.

Preventive maintenance checks of Fire & Gas instruments such as, Heat, Smoke, H2S (hydrogen sulfide), Flammable (hydrocarbon), UV/IR Flame, SO2, etc.

Functional test of fire & gas Inergen, Halon, & CO2 (Wormald systems) based on Cause & Effect during shutdown & maintenance. Preventive maintenance of water Deluge skid & sprinklers systems. Installations, Commissioning of fire & gas monitoring systems.

Troubleshoot on Fire & Gas PLC’s Input & output modules that are connected to fire & gas instruments.

JGC / KBR Joint Venture Algeria Africa

Project: In Salah Gas (ISG)

Client: British Petroleum / Sonatrac

Commissioning Supervisor (September 2003 – April 2004)

Job Description and Responsibilities:

Performed laying of instrument process tubes, cables trays/ladders, stanchion/brackets.

Carry out cable insulation testing & termination on Instrument cabinet till Marshaling panel.

Installation of field instruments base on project RFIT, calibration and Stroking of Control Valves and pre functional test for compressor skid instrument transmitters. Calibration / loop checks of gas detectors like, Open Path detectors, UV/IR flame, Hydrocarbon, Toxic gas (dragger), etc.

Carry out pre-commissioning of instrument installations completion works of vendor supplied equipment’s Rolls Royce Turbine.

Assign as QC Instrument Inspector as preparation for RFIT.

Conducted pre-com & commissioning activity along client prior for testing and start up.

Assign on maintenance warranty period.

Consolidated Contractors International Co. Dukhan & Ras Laffan, Qatar

Project: QP Dukhan Gas Lift & RasGas Expansion Project

Client: Qatar Petroleum and RasGas

Instrumentation Supervisor (June 2002 to June 2003)

Job Description and Responsibilities:

Preparation of PTW & endorsed to Authority, Controller and conduct safety tools box talk prior for work execution/start up.

Carry out installation of instrument conduit pipes, cable trays, ladders. Cable laying & termination from instrument cabinets till marshaling panels.

Control valves, relief valves field stroking and calibration according to manufacture specifications and requisition. Calibration of smart transmitters, Pneumatic and electronic types including miscellaneous instruments such as PT, TT, LT, FT, Level switches, Pressure switches, Gauges (pressure, Temperature, level, flow), Recorder, etc.

Familiarization and interprets P&ID, ILD, Hook up drawing and location drawings, Clearing of punch list captured during site inspection & initiate the list for re-inspection for close out.

Perform pre-commissioning and commissioning activity along with client prior testing/start up.

UTS Kent Company LTD. Abu Dhabi, UAE

Project: Borouge Petrochemical & Gasco LNG Upgraded Project

Client: Borouge Petrochemical and Adnoc Takreer

Instrumentation Supervisor/Tech. (September 2000 to December 2001)

Job Description and Responsibilities:

Preparation of PTW & endorsed to Authority, Controller and conduct safety tools box talk prior for work execution/start up.

Performed calibration (including bench & field) overhauling (existing) of different types of valves likes; Butterfly, Relief, Split ranges type, Shutdown valves (field operation) also Motor Operated Valves (MOV). Manufactured by ABB, Dresser, Masoneilan, Fisher, etc.

Assist console operator (DCS/ESD) monitoring system for functional and loop checking. Perform Fire & Gas detectors loop checks such as Toxic gas, Flammable gas, UV/IR flame, Heat detectors installed at Turbine compartment.

Preparing of instrument loops included, as a document use for loop checking.

Function test of process instruments (bench & field) like; PT, TT, FT, PDT, & LT. Transmitter, gauges, I/P converter and Pressure/Temperature Recorder, etc. manufactured by Rosemount, Foxboro, Honeywell, Yokogawa, Barton, Wika, Calibration of process instruments, such as; Pressure Flow, Temperature Aschcroft, Budenburg, Stewart Buchanan.

Perform pre-commissioning and commissioning activity along with client prior testing/start up.

Daelim Company LTD. Al Jubail, KSA

Project: Petrokemya Olefins III & Sadaf Styrene II

Client: Petrokemya and Sadaf Petrochemical

Instrumentation Technician (July 1999 to July 2000)

Job Description and Responsibilities:

Preparation of PTW & endorsed to Authority, Controller and conduct safety tools box talk prior for work execution/start up.

Carry out installation of cable trays, conduit & PVC piping installation and cable pulling.

Cable testing (Insolation test), cable pulling of HV and LV cable and termination.

Installation of switchgear, transformer, MCC panel, MV & LV panel, lighting fixture, power outlet. Wiring and termination of motor control panel (internal/external), MV and LV panel.

Calibration of Electronics / Pneumatic smart transmitters such as; PT, TT, LT, FT, PDT, gauges, etc manufactured by Yamatake Honeywell, Rosemount and Yokogawa.

Assign as QC Instrument Inspector to prepared field inspection report according to scope of work for instrument such as visual inspection of stanchion location, process impulse line, pneumatic signal tubing, air piping, instrument cables termination, leak testing and transmitters installations prior to loop checking.

Perform pre-commissioning and commissioning activity along with client prior testing/start up.

Philippine Hitachi Plant Co. / MLG Electric Consultant & Contractors Philippines

Project: Yokohama Tire Philippines Plant, LKG Electronics Co. and Sumisola Semiconductor

Client: Yokohama Tire Philippines, LKG Electronics Co. and Sumisola Corp.

Electrician (July 1997 to July 1999)

Job Description and Responsibilities:

Carry out installation of cable trays, conduit & PVC piping installation and cable pulling. Perform cable testing (Insulation test), cable pulling of HV and LV cable and termination.

Installation of switchgear, transformer, MCC panel, MV & LV panel, lighting fixture, power outlet,

Wiring and termination of motor control panel (internal/external), MV and LV panel, Installation of LV system such as fire alarm system, PA system, telephone and data cabling.

Assist supervisor/foreman for daily plan activity.

Perform phase rotation testing & commissioning activity.

Carry out punch list rectification for close out completion.

Fault troubleshooting capability expertise.

Active maintenance member during warranty period.

SKILLS:

Microsoft OFFICE (Outlook, Word, Excel, PowerPoint, Project and Access)

AutoCAD

MAXIMO

Professional Driver License Qatar and Philippines

CAFM Archibus

SAP (Systems Applications and Products in Data Processing)

REFERENCES:

Luisito Reyes

MTV Operator

Qatar Aluminium LTD

+974********

Julius Costales

Operation & Maintenance Supevisor

Qatar Petroleum

+974********

Servando Romero

Quality Assurance Supervisor

Qatar Foundation

+974********

I hereby certify that the statement, data, information and documents stated and attached herein are the factual truth to the best of my knowledge.

Rowel Valentin A. Lucina

Applicant Signature

Contact this candidate