Curriculum Vitae, TasmitaSaha, *

TASMITA SAHA

Contact Department of Electrical Engineering

Information Assistant professor

Meghnad Saha Institution of Technology

Techno India Group,West Bengal, India

Contact No.: +91-869*******,798*******

Email: addxdi@r.postjobfree.com

Present 173/1/1A/1, Shankar kalat nagar, wakad, pimpri chinchwad, Address Pune, Maharashtra

Professional Experience

Assistant Professor - MSIT TECHNO INDIA Group in electrical engineering department (10 July 2017)

Key Deliverables:

Built a challenging and safe learning environment during professional experiences. Accomplished career demonstrating consistent success as professor with a good feedback record. Projects based on IOT, Power electronics and Plc Scada. Expertise on MOODLE, AutoCAD (2D,3D and ECAD Designing), MATLAB, Simulink, Schematic (PSCICE). Expert on CONTROL SYSTEM (Linear, Non-Linear and Digital), Circuit Designing Have done many hardware projects based on circuits designing and power electronics Expertise question and answer - CHEGG India Limited as an electrical engineer (March 2019).

Key Deliverables:

Have to answer unsolved question that the student asked in the Chegg India basically the question is based on the all topic of electrical. Both direct and indirect questions are given have to think logically to submit the answer. Both software MATLAB based and theoretical question are given that are not found in book directly.

Key Deliverables:

Rural field officer -Help Foundation of Tripura in solar energy department. (May 2014 to June 2015

Work on a solar based project Installation of SPV Power Plants under State Plan Fund provided by HFOT of Tripura to rural areas and based on the requirement i.e. KW have to give the requirement of the PV panel module and PV array and build the solar power energy system for the household purpose. Have to keep the data and maintain records of the official works based on this project. And also need to calculate some calculation like – Curriculum Vitae, TasmitaSaha, 2

To calculate the no of solar panel, to calculate the rating of Solar panel, to calculate the rating of batteries for Solar panel system, to calculate the backup time of batteries, To calculate the required and charging current for batteries, To calculate the charging time for batteries, To calculate the rating of charge controller, How much watt solar panel we need?, Connect Solar Panel in Series or Parallel?, How to select the proper solar panel for home with considering all the load keeping in mind Educational Qualifications:

Degree Specialization Institute University/Board

Year of

Passing

Class /

Grade

Obtained

Master in

Electrical

Engineering

Specialization:

Control System

Engineering

Jadavpur University Jadavpur University 2017 81.44% Bachelor of

Technology

Electrical

Engineering

Kalinga Institute of

Technology

KIIT University 2014 80.08%

Higher Secondary Science

Shishu Bihar H.S

School

TBSE 2010 63%

Secondary General

Shishu Bihar H.S

School

TBSE 2008

79%

MASTER THESIS- “Stabilization of cart-inverted pendulum by Multirate compensation” BTECH PROJECT- “Automatic Load Frequency Control”

Industrial training

Name of Institute /

Organization

Project Title

Duration

Odisha Power Transmission

Corporation Limited,

Bhubaneswar

Transmission & Distribution

System

30 days

BHEL Hyderabad Study of turbo generator and

EHV circuit breaker

31 days

ONGC Tripura Overview of activities at ONGC,

Tripura Asset

30 days

NTPC keniha Industrial Asset 1 day

MASTER THESIS- “Stabilization of cart-inverted pendulum by Multirate compensation” BTECH PROJECT- “Automatic Load Frequency Control”

Curriculum Vitae, TasmitaSaha, 3

CONFERENCE PAPER-

1. Stabilization of cart inverted pendulum system using discrete time Lti system in NCRTET-2017.

2. Stabilization of cart inverted pendulum system using Multirate controller in IEEE APSCON-2018 On Signal and Systems.

3.Stabilization of cart inverted pendulum system by 2-rate controller based on PSO techniques in IEEE APSCON-2020 on Applied Signal Processing. SOFTWARE and hardware EXPETICE-

• MATLAB and Simulink -Circuit Designing, Control system (Linear, Discrete Nonlinear), Dc and Ac Machine, Power electronics, Machine learning

• SCHEMATIC DIAGRAM (PSPICE)-Circuit Designing

• LATEX, Basic C, PLC SCADA (Allen Bradley and Siemen’s ladder logic).

• Expertise in MOODLE have my own site tasmitasaha.gnomio.com

• Control Verification testing in MATLAB, Simulink and State flow.

• Code generation and Scaling both on MATLAB and on Basic C.

• Good overview on Modelling and Simulation

• AutoCAD Designing (2-D,3D and ECAD design)

• Work on multimeter, oscilloscope, techogenerator and CRO

• Low pass filter, High pass filter, Half bridge and Full bridge rectifier, Different type turn on process of thyristor hardware designing

• MATLAB development experience mainly on Stateflow and closed loop control system and new research on controlling dc boost converter

• Design, analyse, test and validate power electronics circuits (converter, inverter, rectifier, thyristor gate circuit control, cycloconverter)

• Should have thorough understanding on MOSFET, IGBT and Gate drivers

• Work on various type of stability analysis like (BODE, Nyquist, Root locus) through SISO tool design technique

Extracurricular

• Active participation in College Programs like blood donation.

• Tree plantation in NSS team.

• Member of solar energy society of India.

• Member of SIFE-KISS-KIIT.

• Member of IEEE transaction.

• Participate in ‘Control and Instrument in Aerospace’ in Jadavpur university.

• Attend faculty development program on CYBER SECURITY conducted at Meghnad Saha Institute of Technology, Kolkata on 29 January 2018.

• Have attended on many webinars based on upcoming electrical new trends from reputed institute like IISC Chandigarh, IIT Mumbai Curriculum Vitae, TasmitaSaha, 4

•Great lover of sketching and drawing has my own account https://www.pinterest.ru/Tasmita_Saha/pins/

Achievements

• Completed certification in C language and C++ language.

• Certification in basic in computer and internet. (Microsoft Office, MS-Word, MS- PowerPoint, MS-Excel).

• NPTEL course certificate on Control System 2018.

• NPTEL course on Advanced linear continuous Control system: MATLAB and SIMULINK Application.

• Course on MATLAB Master class from beginning to expert on Udemy.

• Course on PLC and SCADA on Udemy.

• Best paper presentation certificate of appreciation in NCRTET-2017.

• A pedagogy training certification in NITTR, Kolkata.

• Paper presentation in IEEE APSCON 2018.

• Certification course in Gnomio MOODLE., Have own Gnomio site tasmitasaha.gnomio.in

• Have taken 15 days’ workshop based on PLC and Scada held in MSIT by IEEE PES Society Chapter of Kolkata Section.

• Paper presentation in IEEE APSCON 2020.

• FDP on “Important Aspects of Electrical Power & Energy “organize by IEEE PES Society Chapter of Kolkata Section.

• Workshop on Arduino held in Teaching Learning Center, ICT at IIT Bombay.

• Certificate of Energy Literacy on "Learn to Design your own Solar Home System" by Energy Swaraj Foundation.

• Course on AutoCAD "Cross-section of Machine Design in both 3D and 2D" in Ardent Computech Pvt. Ltd.

Linkedln course on Electronics foundation basic circuit and semiconductor devices.

Linkedln course on Big Data in the age of AI.

Linkedln course on Industrial Automation and PLC Ladder logic essential training. Project-

1. Control of mutli-input converter for hybrid wind solar battery-based system. 2.Digital door locking system- Based on the code type in input keyboard a relay coil will be energized to implement door locking system. Designing is done with the help of gate signals.

3. Analog Filter Bases Musical Fountain- Based on the dominant frequency of the input music different solenoids would get actuate causing different fountain to sprout out.

4. IOT based wifi module control of

I. Led on off controlling

II. Tricolour Led with push button

III. Toggle switch

Curriculum Vitae, TasmitaSaha, 5

IV. Controlling of PWM pulse generator

V. By changing voltage of potentiometer change the intensity of LED VI. RGB led control operations

VII. DC motor speed control

VIII. Servo motor interfacing with nodemcu

IX. Relay interfacing with nodemcu

X. IR sensor interface with nodemcu

XI. AC voltage regulator control

XII. Display LCD counter using Arduino

5. Solar charge controller using maximum power point tracking technology using Arduino coding and hardware simulation in proteus 8 professional (CAD). 6. Hand on project on Ceiling fan automatic motor winding machine. 7.PLC projects on bottle filling- A model is design to fill the bottle through PLC and Scada using the motor power electronics device control and sensors 8. Controlling of DC DC boost converter using Multirate PSO techniques and compare it with PID controller.

Interest Areas

Control system (Linear, Digital and nonlinear), Digital electronics, Power Electronics designing, Circuit Theory designing using AutoCAD and schematic diagram in

(PSPICE), Process Control, Real time control system Artificial intelligence, Utilization of electric power and electrical traction system, Circuit Designing, MATLAB Developer, Schematic diagram, Simulink model, AutoCAD (2D,3D and ECAD design technique), PLC and Scada, Hardware testing, Industrial Automation, Digital Design, Logic Design, Analog Design, PLC programmer, Embedded C.

LANGUAGE – English, Hindi, Bengali

Contact this candidate