Robert Bassett

Manufacturing Engineer/CNC Programming

New Haven, CT 06512 addrau@r.postjobfree.com 203-***-****

Significant experience in the machining field. Experience in the designing of advance fixtures for machining and in assembly manufacturing. Work closely with Design Engineers to insure smooth transition from prototype to production. Initialize machining studies to analyze cost reduction on certain product lines. Initialize paper Work for FDA in the medical field and ISO requirements.

•CNC programming 3, 4 & 5 axis Mills

•CNC programming Turn/mill Lathes

•CNC programming Swiss style lathes

•Supervision

•Budget planning

•Lean Manufacturing Training /Value Stream Mapping/SPC/Six Sigma/5S

•Precision machining

•Knowledge of Geometric Tolerance

•Macro programming

•Custom Post Processors

•Medical Machining

•Experience machining exotic metals

•Vericut 7.5

•ITAR Experience

WORK EXPERIENCE

Manufacturing Engineer/CNC Programming

RGBSI/USA /Pratt & Whitney - East Hartford, CT - February 2016 to Oct. 2019

Create 5 axis CNC programs for Milling Centers with NX 9 from solid models.

Design fixtures. Create solid models from drawings.

Help develop new presses for machining tuff material for jet engines.

Manufacturing Engineer/CNC Programming

DISANTO TECHNOLOGY INC - Shelton, CT - December 2014 to December 2015

Create 5 axis CNC programs for Milling Centers with NX 9 from solid models. Design fixtures for machining. Create CNC programs for Citizen Swiss type machines. Select cutting tools for a variety of exotic metals. Write procedures for Machining of parts. Create Marco programs for probing routines.

SSI MANUFACTURING Bristol, CT 9//14-12/14 Contract Position)

CNC Programmer

Create 5 axis CNC programs for Milling Centers with MasterCam 9, from solid models. Create CNC programs for Swiss CNC, Lathes and Turn/Mill lathes. Design fixtures for machining. Create CNC programs for Citizen Swiss type machines. Select cutting tools for a variety of exotic metals. Write procedures for Machining of parts. Create Macro programs for probing routines

HSB AIRCRAFT COMPONENTS New Britain, CT (07/140-8/14 Contract Position)

CNC Programmer

Create 5 axis CNC programs for Milling Centers with NX 9, from solid models. Create CNC programs for Turn/Mill lathes. Design fixtures for machining. Select cutting tools for a variety of exotic metals. Create Macro programs for probing routines. Write procedures for Machining of parts.

Manufacturing Engineer/CNC Programmer

APS TECHNOLOGY Wallingford - August 2012 to June 20146

CNC programs for Milling Centers using MasterCam 7 Improve existing CNC programs to improve cycle times and tooling cost.

Create Macro programs for probing routines.

Created and implemented manufacturing procedures for manufacturing and quality control.

Design fixtures for 4/ 5 axis machine with SolidWorks

Manufacturing Engineer

TIGHITCO - Berlin, CT - March 2010 to August 2012

Create 5 axis CNC programs for Milling Centers with NX 7.5 software from solid models.

Design complex fixtures to machine composite parts for U.S. military helicopters.

Create programs for probing fixture alignment before machining, and part inspection after machining. Create Macro programs for probing routines.

Cutting tool selection for all types of composite machining.

Improve existing CNC programs to improve cycle times and tooling cost.

Create complex setup sheets for machining complex composite parts.

Create CMM programs for Robot Portable Arm using MasterCam.

Manufacturing Engineer II

O.F. Mossberg & Sons - North Haven, CT - March 2009 to March 2010

Create 5 axis CNC programs for Milling Centers with MasterCam software.

Create complex CNC programs for Swiss CNC Lathes Turn/Mills with MasterCam.

Created and implemented manufacturing procedures for manufacturing and quality control.

Design special cutting tools

Tooling selection fixture designing and inspection procedures and machining procedures.

Improve existing CNC programs to improve cycle times and tooling cost.

Manufacturing Engineer II

Wright Medical Technology Inc - Arlington, TN - July 2007 to February 2009

Create 5 axis CNC programs for Milling Centers with Unigraphics NX 6 software.

Create complex CNC programs Turn/Mills and for Swiss CNC Lathes with Unigraphics.

Created and implemented manufacturing procedures for manufacturing and quality control.

Design special cutting tools

Tooling selection, fixture designing, and inspection procedures and machining procedures.

Improve existing CNC programs to improve cycle times and tooling cost.

Manufacturing Engineer Thermoplastics Design special cutting tools

ARC Technologies Inc - Amesbury, MA - April 2005 to June 2007

CNC programming 5 axes with MasterCam software for Aerospace components.

Tooling selection fixture designing, and inspection procedures, machining procedures.

Improve existing CNC programs to improve cycle times and tooling cost.

Create and Process Routers for machining.

Process part drawings for manufacturing

Manufacturing Engineer

Tyco Electronics Corporation - Norwood, MA - July 2002 to April 2005

Create programs for Swiss CNC, Lathes, Turn/Mills and Milling Centers.

Tooling selection, fixture designing, and inspection procedures and machining procedures.

Improve existing CNC programs to improve cycle times and tooling cost.

Work with Design Engineers to improve existing products in a manufacturing environment.

Process ECN changes. Create and Process BOM's

Work with vendors to reduce tooling cost.

Quote insource workflow.

Model Shop Manager

KSARIA Corporation - Wilmington, MA - January 2000 to May 2002

Supervision of all personnel machine shop.

Scheduling work coming from Engineering, reviewing prints, ordering materials, which

Include stock, cutting tools and any other materials needed to fabricate parts and assemble prototypes.

Training and up keeping of CAD/CAM Software which integrates which engineering Cad Maintain a monthly budget.

Work with outside venders, and suppliers.

Design fixtures and jigs for prototype assembly and machining.

Manufacturing Engineer

ABIOMED INC - Danvers, MA - January 1996 to January 2000

Lead supervision for all production CNC machine tools and Model Shop.

CNC programming of lathes and milling machines

Tooling selection, fixture designing, and inspection procedures and machining procedures.

Other responsibilities were to machine new products from Engineering which includes Improve existing CNC programs and update Engineering Drawings.

Work with outside vendors and suppliers

Manufacturing Engineer

Millipore Corporation - Bedford, MA - July 1991 to January 1996

Programming of all CNC milling machines and CNC lathes.

Write setups procedures and operation instructions.

Programming prototype molds in 5axis machining.

Other responsibilities were to issue purchase requisitions to order supplies and tools necessary to complete a project.

Keep records of all projects including AutoCAD files and CNC programs.

Work with Design Engineers to improve existing products in a manufacturingenvironment.

CNC Programming

Helix Technology Corporation - Waltham, MA - June 1988 to July 1990

Program for all the CNC Milling Centers, and Turning Centers that where in prototype Model Shop.

Other responsibilities were to select tooling, write process sheets and provide technical support to Manufacturing.

Programmer/Leadsperson

C.R. Bard - North Reading, MA - November 1987 to June 1988

Programming, tooling and setup of CNC Milling Centers and Turning Centers.

Direct Supervisor for the CNC Machine Shop on the second shift

Nuclear Metals Inc - Concord, MA - January 1980 to November 1987 Direct supervision CNC operators and

Lead personnel.

EDUCATION

Associates

Mechanical Drafting Technology Middlesex College

Lowell High School

ADDITIONAL INFORMATION

Software Skills:

Microsoft Office 2010 MasterCam X9

Unigraphics NX 9.0 Windows 10

Post Maker for NX SolidWorks 12

AutoCAD Probe Pilot for MasterCam

Vericut 7.5 Cimco CNC Editor

Contact this candidate