ALI RAZA

(Mechanical Engineer)

addiq7@r.postjobfree.com

Objective

To seek a position that offers challenging opportunity in Piping & Engineering Field, where my educational and experience potential contribute for achievement of Organizational growth with betterment of my career prospects.

Professional Summary

A Mechanical Engineer with 7 years of experience in execution mechanical systems. Involved in all activities supporting departmental project goals including erection and maintenance, project execution, and reporting. Complete erection & installation of boilers, Storage Tank, Pumps, Vessels, Reactor, field run piping, Hot tapping Tie-Ins, Pre commissioning activities like steam blowing, hydro testing, Shutdown maintenance & Fire protection system of complete plant.

Quench Improvement Project at Olefins-3 PETROKEMYA

Yansab EG-140 DBN project & Annual Turnaround at Yanbu KSA.

Construction of Extender oil Storage tank and equipment Installation at SABIC petrochemical and ExxonMobil’s elastomers plant at sSBR & PBR KEMYA KSA.

Qurayyah combine cycle power plant with 46 GE Heavy Duty Gas Turbine KSA (4600 MW).

PP10 Riyadh combine power plant with 92 Gas Turbine KSA (4500 MW)

Sewage Treatment Plant, Water Treatment Plant and Demineralization system for power plant #10 in Riyadh.

Education

B.E (MECHANICAL ENGINEERING) 2013 AIR UNIVERSITY, PAKISTAN CERTIFICATION IN PIPING DESIGN & ENGINEERING 2015 Page 2

Experience

PROJECT ENGR. (EXPEDITOR) MARITIME ARABIA CO KSA 02-04-2018 TO PRESENT PROJECT: QIP Petrokemya

CLIENT : SABIC

Fabrication of large equipment like Benzene tanks, Tar drums, filters and vessels at MIS Arabia.

Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications.

To liaise with consultants, clients and contractors on the progress of Mechanical works.

To supervise and ensure works are in accordance to the contract drawings and specifications.

Lead Mechanical Engineers in preparing method statement, shop drawings, installation / T&C check sheets, work progress report and other relevant documents for Mechanical related works.

Coordinate with contractors and consultants in preparation of technical submissions.

Assist the Technical Manager in all Mechanical matters including preparing Mechanical works Master Construction and T&C Schedule.

Hold technical discussions with various stakeholders to resolve technical / site issues PROJECT ENGR. SENDAN INT. CO KSA 02-02-2018 TO 02-04-2019 PROJECT: Yansab EG DBN project at Yanbu

CLIENT : YANSAB

Support and monitor engineering activities by collecting and interpreting data to ensure works are delivered safely to plan and specifications.

Adhere to and comply client procedures in execution of Computer Maintenance Management Systems (CMMS) work activities.

Customarily and regularly directs the work of two or more other employees and exercises independent judgment and discretion in supervision.

Capable of supporting development of maintenance related data definition guides, processes and procedures.

develop a project specification with colleagues, often including those from other engineering disciplines

AREA ENGR. SENDAN INT. CO KSA 22-10-2018 TO 11-12-2018 PROJECT: Annual Turnaround Yansab EG DBN project at Yanbu CLIENT : YANSAB & ETEC ENG.

Execution of HOT TAPPING and Tie-Ins for ISBL & OSBL.

Piping erection and demolishing of new effect columns.

All static and rotating equipment’s are installing by aligning EPC to meet the requirement to avoid any rework activity.

To exercising control over manpower and material resources in order to execute the project within budget, schedule, quality and HSE requirements.

Page 3

LEAD MECHANICAL ENGR. SENDAN INT. CO KSA 02-10-2016 TO 11-12-2017 PROJECT: Construction of Extender oil Storage tank with connected piping of sSBR & PBR kemya Sabic Petrochemical Plant

CLIENT : SABIC & ExxonMobil

To install all facilities and modifications required to produce 60kta of PBR and 40kta of SBR products as a swing plant with construction of below mention equipment.

All method statement and lifting plan are reviewed and approved to execute safe workmanship in all critical activity.

Provide support of the Operations and Maintenance manual, the Engineering and Construction manuals, the Material Standards manual, and the Emergency Plan manual.

Provide support for internal audits of compression facilities within the company.

Maintain high regard for the safety of company personnel and assets. MECHANICAL ENGR. ARABIAN BEMCO CO. LTD KSA SEP 2014-OCT 2016 PROJECT : Qurayyah COMBINED CYCLE POWER PLANT

CLIENT : SAUDI ELECTRICITY COMPANY & Worley Parsons Mechanical Engineer, Qurayyah Combined Cycle Power Plant (18 GTG + 18 HRSG + 6 STG= 4600 MW)

Providing on-site technical direction to skilled labor during Gas Turbines Installation, Maintenance and Commissioning activities on Sites in Combine Cycle power Plant

Leading Installation, Maintenance, Commissioning Site Activities with proper Customer/Company Schedule Targets Mindset following strictly Quality and HSE Rules

Utilizing Problem Solving Skills, Engineering Instructions, Drawings, and Process Instructions during Gas Turbines Commissioning and Start-up Activities

Possessing the Technical Capability to troubleshoot and provide routine maintenance checkout for Gas Turbines Products

Preparation of job-planning documents based to Assignment’s Scope of Work (Installation, Upgrade, Outage)

Communicating effectively with Service / Installation / Project Managers and Site Leaders/Site manager on job planning and execution and with Resource Directors regarding site arrivals, departures and job progression

MECHANICAL ENGR. (PIPING) ARABIAN BEMCO CO. LTD KSA SEP 2013 – AUG 2014 PROJECT : PP10 RIYADH COMBINED C POWER PLANT

CLIENT : SAUDI ELECTRICITY COMPANY

Mechanical Engineer, Riyadh Combined Cycle Power Plant # 10 ( 40 HRSG + 10 STG= 4500 MW)

Plans, prioritizes, coordinate & align the work group activities to ensure that project is delivered safely, on time & in budget.

Installation of MSCV valves connected with HP steam With Turbine.

GE turbine over run testing with efficient ways

Ensure proper execution of work as per approved for construction drawings, specifications.

Reporting to project manager regarding daily progress of work, non-compliance, delay in work, material status on site & plans for next working days. Page 4

Managing & coordinating with other department to meet project objectives & deadlines. Water Treatment Plant:

Sewage Treatment Plant, Water Treatment Plant and Demineralization system for power plant #10 in Riyadh.

To provide the required water (quality & quantity) for the the power generation purposes with maximum conductivity of 1 μS/cm for the boiler feed water (2 x 360 m 3/day). Moreover, the plant produces the required water for the drinking purposes as per the client standards and requirements

( 2 x 480 m3/day).

AWARNESS OF SAFETY AND STANDARDS

ASME/ASNI B 31.3 for Process Piping.

ASME Section II for materials.

OISD STANDARD-118.

SABIC Standards

IT Skills & Abilities

An effective communication with excellent interpersonal, management & relationship building skills.

Strong analytical, problem solving & organizational abilities.

Capacity to coordinate and never give up.

Team work capability

MS-Office, MS Project

Auto Cad, Micro station

Basics of Pro-pipe & Caesar II

PRIMAVERA P6 V7 (Basics)

PERSONAL DATA

Father’s Name : M.Afzal Jamshaid

Date of Birth : 27th August 1991

Gender : Male

Nationality : Pakistani

Marital Status : Single

Languages Known : English, Urdu

Hobbies : Traveling, E-games, Football.

Passport Number : JK9897421

Contact this candidate