Pipe Welding
Resume:
Cal Stewart
P.O. Box ***
Garvin, OK *****
***********.*****@*****.***
Phone Number: 580-***-****
Pipe Supervision
Experienced at reading blueprints, plan layout, safety, reports, planning, and managing resources.
Over 8 year’s supervisory experience in welding, maintenance. Install pipe, valves, supports, and all components.
Visualize solutions to bring about changes, directing and leading others to produce desired results
Proven record of high performance standards including attention to schedules, deadlines, budgets and quality of work
Demonstrated ability to work by the numbers, eliminate waste, control costs and improve efficiency
Work Experience
Pipe Foreman
Zachry Industries
Ardmore, OK
August 2018-March 2019
Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders
Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints
Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints
Measure and mark pipes for cutting or threading
Plan pipe system layout, installation, or repair, according to specifications
Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods
Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment
Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications
Cut or bore holes in structures, such as bulkheads, decks, walls, or mains, prior to pipe installation, using hand or power tools
Install fixtures, appliances, or equipment designed to reduce water or energy consumption
Install pipe systems to support alternative energy-fueled systems, such as geothermal heating or cooling systems
Install or test gray water systems, such as recycling, treatment, or irrigation systems
Operate motorized pumps to remove water from flooded manholes, basements, or facility floors
Prepare cost estimates for clients
General Foreman
Aescit
Hackberry, LA
May 2018-July 2018
Supervise, coordinate, or schedule the activities of construction or extractive workers
Read specifications, such as blueprints, to determine construction requirements or to plan procedures
Inspect work progress, equipment, or construction sites to verify safety or to ensure that specifications are met
Locate, measure, and mark site locations or placement of structures or equipment, using measuring and marking equipment
Coordinate work activities with other construction project activities
Assign work to employees, based on material or worker requirements of specific jobs
Estimate material or worker requirements to complete jobs
Confer with managerial or technical personnel, other departments, or contractors to resolve problems or to coordinate activities
Order or requisition materials or supplies
Analyze worker or production problems and recommend solutions, such as improving production methods or implementing motivational plans
Train workers in construction methods, operation of equipment, safety procedures, or company policies
Record information such as personnel, production, or operational data on specified forms or reports
Getting Information
Communicating with Supervisors, Peers, or Subordinates
Coordinating the Work and Activities of Others
Inspecting Equipment, Structures, or Material
Organizing, Planning, and Prioritizing Work
Making Decisions and Solving Problems
Evaluating Information to Determine Compliance with Standards
Guiding, Directing, and Motivating Subordinates
Establishing and Maintaining Interpersonal Relationships
Monitor Processes, Materials, or Surroundings
Identifying Objects, Actions, and Events
Developing and Building Teams
Pipe Foreman
wyatt field sevices
port author, TX
January 2018-March 2018
Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints
Plan pipe system layout, installation, or repair, according to specifications
Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications
Remove and replace worn components
Install pipe systems to support alternative energy-fueled systems, such as geothermal heating and cooling systems
Inspecting Equipment, Structures, or Material
Identifying Objects, Actions, and Events
Making Decisions and Solving Problems
Monitor Processes, Materials, or Surroundings
Evaluating Information to Determine Compliance with Standards
Communicating with Supervisors, Peers, or Subordinates
Establishing and Maintaining Interpersonal Relationships
Processing Information
Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment
pipe foreman
chicago bridge and iron
hackberry, LA
March 2017-December 2017
Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints
Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods
Plan pipe system layout, installation, or repair, according to specifications
Making Decisions and Solving Problems
Monitor Processes, Materials, or Surroundings
Evaluating Information to Determine Compliance with Standards
Communicating with Supervisors, Peers, or Subordinates
Developing Objectives and Strategies
Pipefitter
Wyatt Field Services
Houston, TX
February 2017-March 2017
Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders
Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints
Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints
Measure and mark pipes for cutting or threading
Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods
Plan pipe system layout, installation, or repair, according to specifications
Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment
Modify, clean, or maintain pipe systems, units, fittings, or related machines or equipment, using hand or power tools
Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications
Cut or bore holes in structures, such as bulkheads, decks, walls, or mains, prior to pipe installation, using hand or power tools
Pipe Foreman
JV Driver
Freeport, TX
September 2016-November 2016
Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders
Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints
Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints
Measure and mark pipes for cutting or threading
Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods
Plan pipe system layout, installation, or repair, according to specifications
Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment
Modify, clean, or maintain pipe systems, units, fittings, or related machines or equipment, using hand or power tools
Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications
Cut or bore holes in structures, such as bulkheads, decks, walls, or mains, prior to pipe installation, using hand or power tools
Install automatic controls to regulate pipe systems
Pipefitter
W.G. Yates and Sons
Freeport, TX
March 2016-August 2016
Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders
Lay out full scale drawings of pipe systems, supports, or related equipment, according to blueprints
Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints
Measure and mark pipes for cutting or threading
Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods
Plan pipe system layout, installation, or repair, according to specifications
Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment
Modify, clean, or maintain pipe systems, units, fittings, or related machines or equipment, using hand or power tools
General foreman
Robins and Morton
Mulberry, FL
October 2015-February 2016
Read and interpreted blueprints, work orders, layouts, charts.* Observed machine operations.
Foreman Pipefitter
Robbins Morton
Morrelton, AR
June 2015-August 2015
Inspected work for quality.* Tested system for leaks.* Carried out tests to control and measure variables such as pressure, flow, temperature, motion, force, chemical composition.* Read and interpreted schematic drawings, blueprints, specs, manuals, handbooks, change orders.* Followed all regulations including OSHA, safety, PPE, JSA, ISO.* Assisted in handling waste.* Brought personal tools.* Maintained tools and equipment.* Certified in CVPC piping systems.* Certified in NCCER.* Used industry tools such as saws, cutting torches, pipe threaders, pipe benders, pressure gauges, levels, power grinders, screwdrivers, dies, taps, welding machines.* Used CAD software.
Foreman Pipefitter
Yates Construction
Bogalussa, LA
May 2015-June 2015
Supported pipe systems and related hydraulic and pneumatic equipment for systems such as steam, hot water, heating, cooling, lubricating, sprinkling.* Worked with others to develop production strategy.* Planned sequence of operations.* Laid out full scale drawings of pipe systems.* Selected size of pipe and related material.* Transported equipment to work site.* Set up work site.* Measured and marked pipes for cutting and threading.* Cut pipe to specs.* Cut openings for pipes in structures such as bulkheads, decks, walls, mains.* Installed pipe supports such as clamps, brackets, hangers.* Operated equipment for welding, brazing, cementing, soldering, threading.
Pipe Foreman
Yates Construction
Valliant, OK
December 2014-May 2015
Supervised workers.* Planned and prioritized daily work schedules.* Assigned staff duties based on need.* Managed staff to meet daily business needs.* Solved work-related problems.* Reviewed work to ensure proper completion.* Explained work orders to lower-level staff.* Checked specifications of materials against work orders.* Notified departments of problems.* Inspected freight.* Determined loading order of materials.* Tracked and evaluated employee performance.
Pipefitter
IPC
Fort Dodge, IA
November 2014-November 2014
Supported pipe systems and related hydraulic and pneumatic equipment for systems such as steam, heating.* Set up work site.* Measured and marked pipes for cutting and threading.* Cut pipe to specs.* Cut openings for pipes in structures such as bulkheads, decks, walls, mains.* Installed pipe supports such as clamps, brackets, hangers.* Assembled and secured pipes, tubes, fittings.* Followed all regulations including OSHA, safety, PPE.* Brought personal tools.* Applied basic math.* Secured all tools properly.* Maintained tools and equipment.
Pipefitter Foreman
Yates Construction
Riceboro, GA
September 2014-October 2014
Supported pipe systems and related hydraulic and pneumatic equipment for systems such as steam.* Worked with others to develop production strategy.* Planned sequence of operations.* Set up work site.* Inspected work for quality.* Tested system for leaks.* Flushed pipe units.* Carried out tests to control and measure variables such as pressure, flow.* Read and interpreted schematic drawings, blueprints, specs.* Followed all regulations including OSHA, safety, PPE.* Applied basic math.* Completed records.
Pipefitter
Yates Construction
Deridder, LA
June 2014-September 2014
Supported pipe systems and related hydraulic and pneumatic equipment for systems such as steam, heating.* Cut pipe to specs.* Cut openings for pipes in structures such as bulkheads, decks, walls, mains.* Installed pipe supports such as clamps, brackets, hangers.* Assembled and secured pipes, tubes, fittings.* Operated equipment for welding, brazing, cementing, soldering, threading.* Inspected work for quality.* Tested system for leaks.* Carried out tests to control and measure variables such as pressure, flow, temperature.* Read and interpreted blueprints, specs, manuals, handbooks, change orders.* Followed all regulations including OSHA, safety, PPE.* Brought personal tools.
Pipefitter
KBR
Valliant, OK
May 2014-May 2014
Supported pipe systems and related hydraulic and pneumatic equipment for systems such as steam, heating.* Planned sequence of operations.* Laid out full scale drawings of pipe systems.* Selected size of pipe and related material.* Set up work site.* Cut pipe to specs.* Cut openings for pipes in structures such as bulkheads, decks, walls, mains.* Installed pipe supports such as clamps, brackets, hangers.* Assembled and secured pipes, tubes, fittings.* Operated equipment for welding, threading.* Inspected work for quality.* Tested system for leaks.
Pipefitter
Yates Construction
Hopeville, VA
March 2014-May 2014
Supported pipe systems and related hydraulic and pneumatic equipment for systems such as steam, heating.* Worked with others to develop production strategy.* Planned sequence of operations.* Selected size of pipe and related material.* Set up work site.* Cut pipe to specs.* Cut openings for pipes in structures such as bulkheads, decks, walls, mains.* Installed pipe supports such as clamps, brackets, hangers.* Assembled and secured pipes, tubes, fittings.* Operated equipment for welding, threading.* Inspected work for quality.* Tested system for leaks.
Boiler Maker
Zachry
Carrollton, GA
January 2014-February 2014
Examine boilers, pressure vessels, tanks, or vats to locate defects, such as leaks, weak spots, or defective sections, so that they can be repaired.* Bolt or arc weld pressure vessel structures and parts together, using wrenches or welding equipment.* Inspect assembled vessels or individual components, such as tubes, fittings, valves, controls, or auxiliary mechanisms, to locate any defects.* Repair or replace defective pressure vessel parts, such as safety valves or regulators, using torches, jacks, caulking hammers, power saws, threading dies, welding equipment, or metalworking machinery.* Attach rigging and signal crane or hoist operators to lift heavy frame and plate sections or other parts into place.* Install manholes, handholes, taps, tubes, valves, gauges, or feedwater connections in drums of water tube boilers, using hand tools.* Shape seams, joints, or irregular edges of pressure vessel sections or structural parts to attain specified fit of parts, using cutting torches, hammers, files, or metalworking machines.* Position, align, and secure structural parts or related assemblies to boiler frames, tanks, or vats of pressure vessels, following blueprints.* Shape or fabricate parts, such as stacks, uptakes, or chutes, to adapt pressure vessels, heat exchangers, or piping to premises, using heavy-metalworking machines such as brakes, rolls, or drill presses.* Clean pressure vessel equipment, using scrapers, wire brushes, and cleaning solvents.* Assemble large vessels in an on-site fabrication shop prior to installation to ensure proper fit.* My accomplishments included: pre heater rebuild for Georgia power complete overhaul.* Knowledge sets include: Acetylene torches, Adaptors, Adjustable crescent wrenches, Adjustable pipe wrenches, Adjustable wrenches, Air carbon arc cutting equipment, Air grinders, Air hammers, Air samplers or collectors, Allen wrenches, Atmospheric monitoring devices, Ball peen hammers, Beam clamps, Beam trolleys, Below the hook device, Bench vises, Beveling machines, Bevels, Blacksmiths’ punches, Blocks or pulleys, Blow torches, Bolt cutters, Box end wrenches, Brakes, Buffing tools, Bull pins, C clamps, Chain falls, Chain hoists, Chain pulleys, Channel lock pliers, Chipping hammers, Clear lenses, Cold chisels, Combination squares, Combination wrenches, Digital lasers, Drift pins, Dust masks, Ear plugs, Electric welding equipment, Electrode holders, Electrode ovens, Engineers’ levels, Fire extinguishers, Fire retardant apparel, Fire retardant coveralls, Flashback arrestors, Framing squares, Full body harnesses, Gauges or inspection fixtures, Goggles, Grinders, Ground clamps, Hammer wrenches, Hammers, Hard hats, Hoists, Hydraulic jacks, Ladders, Laser levels, Leather protective clothing, Levels, Loading equipment, Masks or accessories, Measuring tapes, Metal markers or holders, Open end wrenches, Oxy Acetylene, Pipe and tubing cutters, Pipe vises, Pipe wrenches, Plate clamps, Plumb bobs, Pneumatic grinders, Pneumatic hammer, Pneumatic hoists, Pneumatic impact wrenches, Power grinders, Pre-heating torches, Protective coveralls, Protective gloves, Protractors, Pry bars, Pullers, Regulators, Repairs, Safety glasses, Safety goggles, Safety harnesses or belts, Scaffolding, Screwdrivers, Sledgehammers, Slip joint pliers, Socket sets, Socket wrench sets, Spreader beams, Spud wrenches, Squares, Staging equipment, Stick electrodes, Straight edges, Tape measures, Torque wrenches, Transit levels, Tube end facers, Tube end finishers, Tube milling machines, Tube pullers, Two way radios, Vise grip pliers.
Pipefitter
Saulsbury
Calumet, OK
November 2013-January 2014
Transported equipment to work site.* Set up work site.* Measured and marked pipes for cutting and threading.* Cut pipe to specs.* Installed pipe supports such as clamps, brackets and hangers.* Operated equipment for welding and threading.* Tested system for leaks.* Followed all regulations including OSHA, safety, PPE, JSA and ISO.* Brought personal tools.* Wore appropriate safety equipment when required.* Used industry tools such as saws, cutting torches, pipe threaders, pipe benders, pressure gauges, levels, power grinders, screwdrivers, taps and welding machines.* My accomplishments included: built new natural gas plant.* Knowledge sets include: Adjustable wrenches, Air operated grinders, Air-acetylene torches, Alternating current/direct current AC/DC welders, Angle air grinders, Arc welders, Ball peen hammers, Block and tackle equipment, Blow torches, Bolt cutters, Box end wrenches, Centering head tools, Chain falls, Cold chisels, Combination squares, Crescent wrenches, Cutting torches, Deburring tools, Drill presses, Drophead dies, Fabrication, Flat head screwdrivers, Flow gauges, Flow sensors, Framing squares, Gas generators, Grinders, Hoists, Hole cutting tools, Impact wrenches, Jam-proof ratchet threaders, Ladders, Laser levels, Leak-testing gauges, Levels, Liquid leak detectors, Loaders, Manual pipe benders, Measuring tapes, Metal hand saws, Metal markers or holders, Monkey wrench sets, Mud pumps, Offset grinders, Open end wrenches, Phillips head screwdrivers, Pipe bending tools, Pipe cutters, Pipe fabrication shears, Pipe flange aligners, Pipe flaring tools, Pipe lasers, Pipe or tube cutters, Pipe threaders, Pipe threading machines, Pipe vises, Pipe wrenches, Pipepro Pipefitting software, Plumb bobs, Pneumatic grinders, Pneumatic hammer, Pneumatic pipe bevelers, Pneumatic wire brushes, Pocket levels, Portable grinders, Power drills, Power grinders, Power hammers, Pressure gauges, Pressure indicators, Propane torches, Pry bars, Pulleys, Radius markers, Ratchets, Reamers, Safety harnesses or belts, Scaffolding, Shears, Skid steer loaders, Slip joint pliers, Specialty wrenches, Stands, Stationary grinders, Tape measures, Taps or dies, Threading dies, Threading machines, Torch cutter guides, Transit levels, Tube end finishers, Tuggers, Two-hole pins, Welder, Welding, clamps, Welding hoods, Welding machines, Welding masks, Winches, Wire brushes.
Education
Associate's Degree, Applied Sciences
Murray State College
Durant, OK
Licenses & Certifications
NCCER - January 2016
Journeyman Pipefitter Plus Certified Pipe Evaluator Instructor NCCER Supervision
Contact this candidate