Steven G. Rupp **** Dudley St y Dearborn, MI ***** y 313-***-****

addibd@r.postjobfree.com

Summary

y Self-motivated and assertive.

y Quickly learn procedures and methods.

y Professional demeanor.

y Friendly - can get along well with others.

y Extensive experience in troubleshooting and repair. y Enjoy working with people.

y Dependable - can work without supervision.

y 35 years of progressive experience and responsibility with documented success in the areas of troubleshooting and repair at various organizational levels. Experience

Link Engineering Dearborn, MI

Instrumentation Technician 2 07/2019 to Present

Installed and repaired testing equipment to prescribed specifications.

Inspect components of industrial equipment for accurate assembly and installation and for defects such as loose connections and frayed wires.

Maintained equipment logs that recorded performance problems, repairs, calibrations and tests.

Collaborated with other workers involved in installing and maintaining equipment and components.

Performed scheduled preventive maintenance tasks, such as checking, cleaning and repairing equipment, to detect and prevent problems.

Examined work orders and conversed with equipment operators to detect equipment problems and to ascertain whether mechanical and human errors contributed to the problems.

Set up and assessed industrial equipment to ensure that it functioned properly.

Assessed faulty equipment to diagnose malfunctions, using test equipment and software and applying knowledge of the functional operation of electronic units and systems.

Made adjustments to meter components, such as setscrews and timing mechanisms, so that they conformed to specifications.

Calibrate thermocouple module stats for specified temperature.

Reassembled repaired equipment and soldered top, front and back case panels in place, using soldering guns, power tools and hand tools.

Verified calibration and operation of pressure transducers. NSF Ann Arbor. MI

Calibration Technician. 01/07/2019 to 05/10/2019

y Measured dimensions of measuring instruments such as rulers, calipers, gauges, and micrometers.

y Calibrated measuring instruments and test equipment such as dial indicators, fixed gauges, and height gauges.

y Recorded inspection and test data, such as weights, temperatures, grades, and moisture content, and quantities inspected or graded.

Steven G. Rupp Page 2

y Wrote test and inspection reports describing results, recommendations, and needed repairs. y Used handtools, testing instruments, calibrating instruments and equipment. y Read quality control manual and testing specifications. y Obtained data to test and calibrate specific devices. y Connected instrument and device to fixture, according to specifications, using handtools. y Regulated factors according to specifications.

y Adjusted calibration mechanisms to obtain specified operational performance of device. y Set controls to regulate factors, such as current flow, timing cycle, pressure, temperature and vacuum.

Trescal, Inc. Hartland, MI 48353

Instrumentation Technician 2 Oct 2009 to December 2018 Metrology asset management using MET/track Test Equipment Asset Management Software.

¢ Installed and repaired testing equipment to prescribed specifications.

¢ Inspect components of industrial equipment for accurate assembly and installation and for defects such as loose connections and frayed wires.

¢ Maintained equipment logs that recorded performance problems, repairs, calibrations and tests.

¢ Collaborated with other workers involved in installing and maintaining equipment and components.

¢ Performed scheduled preventive maintenance tasks, such as checking, cleaning and repairing equipment, to detect and prevent problems.

¢ Examined work orders and conversed with equipment operators to detect equipment problems and to ascertain whether mechanical and human errors contributed to the problems.

¢ Set up and assessed industrial equipment to ensure that it functioned properly.

¢ Assessed faulty equipment to diagnose malfunctions, using test equipment and software and applying knowledge of the functional operation of electronic units and systems.

¢ Made adjustments to meter components, such as setscrews and timing mechanisms, so that they conformed to specifications.

¢ Calibrate thermocouple module stats for specified temperature.

¢ Reassembled repaired equipment and soldered top, front and back case panels in place, using soldering guns, power tools and hand tools.

¢ Verified calibration and operation of pressure transducers.

¢ Built custom cable and wiring harnesses.

¢ Contract employee for GM Tech Center, Research and Development. Jacobs Southfield, MI

Calibration Tech 2 Feb 2007 to Sept 2009

Connected electrical equipment and accessories to testing equipment, such as voltmeter, ammeter, oscilloscope and torque indicator.

¢ Assembled test equipment and executed tests on performance and reliability of mechanical, structural, and electromechanical equipment.

¢ Collaborated with engineers, supervisors, and other technical workers to assist with equipment installation, maintenance, and repair techniques.

¢ Modified performance and operation of component parts and circuitry to specifications, using test equipment and precision instruments.

Steven G. Rupp Page 3

¢ Attached thermocouple wires to various parts of engine and recorded temperature readings of oil, water and transmissions, etc.

¢ Tested completed motor vehicles, using conventional and computerized dynamometer. Started engine to drive dynamometer.

¢ Analyzed gauges on instrument panel to determine that power developed at specified speeds, timing and other engine specifications met standards.

¢ Place and secure vehicles on dynamometers.

¢ Programmed test procedures into computer.

¢ Monitored tests.

Metro Imaging Systems Sterling Heights, MI

Field Service Technician & Wide Format Specialist Feb 2005 to Jan 2007 y Inspected malfunctioning and damaged products to determine nature and scope of problems. y Provided on-site technical assistance in overseeing repairs. y Examined and tested equipment to determine nature and probable cause of malfunctions. y Used work aids such as voltmeter, ohmmeter, schematic drawings and equipment specifications.

y Conversed with equipment operators to ascertain problems with equipment before breakdown and to determine if breakdown was due to human error or mechanical problems. y Disassembled machines and examined parts, such as gears, guides, rollers and pinions for wear and defects.

y Lubricated and cleaned parts.

y Gave instructions in the operation and care of machines to machine operators. y Assembled new machines.

y Installed and repaired electronic equipment, such as analog and digital copiers, wide format copiers, multi function copiers and duplicators.

y Interpreted maintenance manuals, schematics and wiring diagrams. y Repaired equipment, utilizing knowledge of electronics and using standard test instruments and hand tools.

Ricoh Business Systems Rochester Hills, MI 48309

Senior Technical Representative July 1996 to January 2005 y Inspected malfunctioning and damaged products to determine nature and scope of problems. y Provided on-site technical assistance in overseeing repairs. y Examined and tested equipment to determine nature and probable cause of malfunctions. y Used work aids such as voltmeter, ohmmeter, schematic drawings and equipment specifications.

y Conversed with equipment operators to ascertain problems with equipment before breakdown and to determine if breakdown was due to human error or mechanical problems. y Operated machines to test moving parts and to listen to sounds of machines in order to locate causes of trouble.

y Disassembled machines and examined parts, such as gears, guides, rollers and pinions for wear and defects.

y Lubricated and cleaned parts.

y Gave instructions in the operation and care of machines to machine operators. Steven G. Rupp Page 4

y Assembled new machines.

y Installed and repaired electronic equipment, such as analog and digital copiers, wide format copiers, multi function copiers and duplicators.

y Interpreted maintenance manuals, schematics and wiring diagrams. y Repaired equipment, utilizing knowledge of electronics and using standard test instruments and hand tools.

Multi-Color Service Co. Royal Oak, MI 48073

Field Service Technician July 1985 to June 1996

y Inspected malfunctioning and damaged products to determine nature and scope of problems. y Analyzed review and inspection findings to determine source of problems and recommended repair, replacement and other corrective actions.

y Provided on-site technical assistance in overseeing repairs. y Repair of Diazo type duplicators involving Electric/Electronic troubleshooting and Mechanical troubleshooting.

Metro-West Copy Systems, Inc Plymouth, MI 48170

Field Service Technician Oct 1983 to July 1985

y Trained new personnel in the basics of copier, mimeograph and Spirit duplicator repair. y In charge of in shop repair, normal inspections and troubleshooting. y Stocked and issued materials and merchandise.

U.S. Army Fort Carson, CO

Specialist 4 June 1980 to June 1983

y Tested and repaired radio transmitting and receiving equipment in accordance with diagrams and manufacturer's specifications.

y Examined equipment for damaged components and loose and broken connections and wires. y Tested equipment for factors such as power output, frequency power, noise level, audio quality and dial calibration, using oscilloscopes, radio frequency and wattmeter, ammeters and voltmeters.

y Removed and replaced defective units that were not repairable. y Turned setscrews to adjust receivers for sensitivity and transmitters for maximum output. y Installed, tested, adjusted, modified and repaired intercommunication systems. y Specialized in testing and repairing radio transmitting and receiving equipment in motor vehicles and commercial and government establishments. y Acting Communications Chief.

y Duties included being in charge of classified material room. Education

Kyocera Mita America, Inc Madison Heights, MI

y Over 200+ hours of training on analog, digital copiers, fax machines and printers. y Various certificates.

Ricoh New Jersey

y Over 300+ hours of training on analog, and digital copiers. Steven G. Rupp Page 5

y Various certificates

Electronic Servicing Institute Lincoln Park, MI

y Relevant Coursework included electronic theory, basic computer, and basic robotic. Ozalid New York

y Over 100+ hours of training on Diazo type duplicators. References

Available upon request

Contact this candidate