Andre Khan

Cell: 310-***-****

310-***-****

Home: 310-***-**** Email: addg20@r.postjobfree.com

PROFESSIONAL SKILLS SUMMARY:

●21 Years of Compliance Engineering testing of avionics military and commercial systems

●Strong knowledge of military and commercial standards

●Practical, theoretical RF/EMI, and electro-mechanical skills

●Familiar with Lab View and Nicolet LDS Monitor DAQ Systems and Winsoft DAC

●SVG School trained 8600 Ops/Maintenance and ESD sensitive components per OP003B.

●Compatible Electronics EMC /EMI / Design / Compliance Trained.

●Building Aircraft Cables, Load Boxes, Reading Electrical Schematics and Mechanical Drawings

●and Soldering

●Writing Verification Test Plans, Test Procedures and Test Reports.

EMPLOYMENT HISTORY:

Leach International Corp. :

Buena Park, CA

4/2019 to Present

EMI / EMC Electro Mechanical SR.Test Engineer

Responsible for RF EMC/EMI Development, Integration, Testing, and Product Development and Documentation for Qualification Test

Rogerson Kratos: Pasadena, CA 2/2018-3/2019 Electrical Engineer / EMI/ EMC Test Engineer/

The Design Engineer is responsible for the design and test of both analog and digital circuits for avionics systems.

• Design and integrate digital circuits based upon embedded microprocessors. Design analog circuits to meet system requirements.

• Design tasks include, but are not limited to: Product Mechanical and Electrical Engineering including PCB board design and chassis design, Reliability and Failure Analysis, TSO Compliance assurance, definition of sub-system design including LCD Technology, LED Backlighting, Bezel & controls design, System Interconnection, EMI design, Lighting design, Thermal Design and System Installation Kits.

• Develop Qualification Test Plans and Procedures in accordance with FAA and customer requirements. Perform Product Qualification Testing. Perform failure analysis and troubleshooting if required.

• Develop Functional Test Procedures and Acceptance Test Procedures in accordance with customer requirements.

• •Interface with Systems Engineers and Software Engineers to ensure that system requirements are met. Troubleshoot existing circuit card assemblies to determine root cause of failure.

• Responsible for Visual database BOMs and drawing change control. Manage and report project details to internal and external customers. Other duties as assigned.

• Responsible for RF EMC/EMI Development, Integration, Testing, and Product Development and Documentation for Qualification Test conducted on the DAU, EFIS and DU flight displays and controls.

• Performed testing as per FAA/ D0160, MIL-STD-810, 461 and Environmental Testing

Responsible for RF EMC/EMI Development, Integration, Testing, and Product Development and Documentation for Qualification Test conducted on the DAU, EFIS and DU flight displays and controls.

Crane Aerospace: Burbank, CA 2/2016 –1/2017 EMC/EMI RF Test Engineer

●Responsible for RF EMC/EMI Development, Integration, Testing and the Documentation for Qualification Test conducted on the COMAC C919, Boeing 777 and E2 Brake system and brake system Control unit (BCMU), Nose Landing Gear system (NLG), Main landing Gear (MLG) and (TPIS) Tire Pressure Sensor.

●Participating in the design and development of Automatic test equipment (ATE) used during the qualification and safety of flight testing (SOF) of the above systems.

●Performed testing as per FAA/ D0160, MIL-STD-810, 461 and Environmental Testing using National Instrument Data Acquisition, CAN Bus, Win Soft DAC and Lab View Programs.

Esterline Controls Communication Systems: Sylmar, CA 9/2015 – 12/2015 EMI Lead Test Engineer

●Responsible for RF EMC/EMI Development, Integration Testing and the Documentation for Safety of Flight Testing Test (SOF) conducted on the E2 Program.

●Participating in the design and development of Electromechanical Throttle and Rudder/Pedal Assembly used during the qualification and safety of flight testing (SOF) of the above systems

●Performed testing as per FAA/ DO160, MIL-STD-810, 461 and Environmental, and EMI Testing

●Responsible for RF EMC /EMI Development, Integration, Testing and the Documentation for Qualification Testing.

Directv: El Segundo, CA 7/2013 – 7/2015 RF Test Engineer

●Evaluation test cycles at preliminary design review stage and the acceptance test cycles at the critical design review for each product.

●Responsibilities: RF testing, Thermal testing, and Power testing. Typical RF Products that require testing include LNB’s, multi-switches, splitters, Taps, amplifiers, power inserters, polarity lockers and filters. Test specifics in RF4CE, Coexistence, Audio, Video and USB, Thermal and Power testing.

●

Honeywell: Torrance, CA 5/2011- 1/2013 EMC/EMI RF Engineer

●Responsible for RF EMC/EMI Development, Integration, Environmental Testing and the Documentation for Qualification Test conducted on the Airbus A350 and Boeing 737.

●Participating in the design and development of Electromechanical actuators used during the qualification and safety of flight testing (SOF) of the above systems.

●Performed testing as per FAA/ DO160, MIL-STD-810, 461 and environmental, and EMI Testing for qualification using National Instrument Data Acquisition, CAN Bus, and Lab View Programs.

●Supports Root Cause and Corrective Action (RCCA) activities associated with development, production and field service problems. Responsible, along with other IPDS team members, for management and accurate and timely reporting of program budget, schedule, and technical problems.

●Applies risk management practices to development and production/field support programs.

Crane Aerospace: Burbank, CA 6/2008 –12/2010 EMC/EMI RF Test Engineer

●Responsible for RF EMC/EMI Development, Integration, Testing and the Documentation for Qualification Test conducted on the Boeing 787 Brake system and brake system Control unit (BSCU), Nose Landing Gear system (NLG), Main landing Gear (MLG).

●Participating in the design and development of Automatic test equipment (ATE) used during the qualification and safety of flight testing (SOF) of the above systems.

●Performed testing as per FAA/ D0160, MIL-STD-810, 461 and Environmental Testing using National Instrument Data Acquisition, CAN Bus, and Lab View Programs.

Compatible Electronics: Agoura, CA 2/1998 – Jan 2008 Test Engineer

●Responsible for consulting clients in developing qualification plans and test procedures to meet current requirements per DO-160, Mil-STD 704, FCC Part 15 and Part 18, IC (Industry Canada), CE (European Complacence), VCCI (China), Austel (Australia /New Zeeland)

●Design test fixtures utilizing Linux and C++ / Generate qualification test reports

●Debug and troubleshoot various problems during test

Solatron Enterprises: Torrance, CA 1997 – 1998 Electro/Mechanical Test Engineer

●Testing Air Bags for Automotive Industry

●Set up and calibrate Powder Loaders, TIG Welders and Prototype Machinery

M/A Com Power Hybrids: Torrance, CA 1996 – 1997 Electro/Mechanical Test Tech

●Responsible for calibration and Maintenance of wafer fab. Diffusion, Teos, Poly and Nitride systems, Evaporator, Ion Mill, Water scrubber, photo Mask Aligners

EDUCATION:

MIT Master’s Program Aeronautics and Astronautics (2017 to Present)

ITT Technical Institute, West Covina, CA March of 1996

Bachelor of Applied Science in Automated Manufacturing Technology / Electronic Engineering

ITT Technical Institute, Torrance, CA March of 1995

Associate of Applied Science in Electronic Engineering Technology

Contact this candidate