Engineer Engineering
Resume:
EXPERIENCE
PETROCHEMICAL INDUSTRIES DEVELOPMENT MANAGEMENT CO. - IRAN
LEAD PROCESS ENGINEER,
Project Name /Client: BIDBOLAND Gas Treatment
Brief Description: EPC, Lump-sum turn-key project for Slug catcher, Feed Gas Separation and Condensate Stabilization, Acid Gas Sweetening, C2 Recovery Unit, Central Refrigeration Unit, Compression unit, Gas Dehydration, NGL recovery, Sulfur Recovery, Hydrogen Desulphurization Unit, Cryogenic storages and Feed/ Products Pipelines. Completing detailed process engineering design, Worked with design for multi-unit facilities including ISBL and OSBL areas. Evaluated facilities design conditions for integration with the new revamp conditions. Cultivated PFD, P&ID, and engineering detail design, equipment datasheets, engineering calculations, HAZOP activities. Drove process simulation by Hysys, and heat and material balance development. Developed PFDs and P&IDs, hydraulic calculations and process data sheets for equipment and instruments. Prepared operating manual and support for plant start up. Delivered amine system analysis, calculation, optimization of amine recalculating rate and amine concentration. Conceptual and FEED study for HDS unit, Extra strategic storage tanks and loss prevention study(Pressure Relief and Flare Analysis) FLOW ASSURANCE ENGINEER,
Project Name /Client: Kish Gas Development Project Wellhead Cluster Facilities Brief Description: Design of Two 32” Raw Pipeline with Dynamic simulation Using Pipesim, PVTsim and OLGA with the various maintenance and Inspection Operations :
-Engineering design including conceptual, front-end (FEED) and detailed engineering design.
- Develop and optimize pipeline hydraulic designs for pipeline facilities.
- Document and develop design basis information and process design criteria.
- Conduct studies using licensed software packages covering pipeline simulation.
- Simulate Transient pipeline hydraulics.
- Flow Assurance challenges and troubleshooting (Prediction of slug tracking, Corrosion prediction, Prediction of pigging frequency and inhibitors’ injection, transitional states’ modeling…) PAYMAN NAJAF
35 Empress Ave, Suite 401,North York Ontario, Canada, M2N 6T3 ***********@*****.***
PROFESSIONAL PROFILE
Broad experience as a Process engineer in most operational fields related to operational and technical support to oil, natural gas and petrochemical operations. Involvement and leadership in organizational redesign and effectiveness in field operations and engineering work environments.
- Experience in conceptual design, the basic design, the FEED and detailed design of Oil & Gas Facilities.
- Strong Process Engineering and multi-discipline technical base with a good understanding of the roles of the other engineering and project disciplines.
- Experience in optimizing plant operations, Maintains, develops, validation and updates of process simulation results and worked on project’s debottlenecking.
- Proficient in creating and developing process drawings and documents such as Process Flow Diagram (PFD), Piping and Instrumentation Diagram (P&ID), Heat and Material Balance, Line List, Cause and Effect Diagrams, Operating Limits Table, and Process Basis of Design, plant layouts and 3-D models.
- Manage and perform engineering/design execution, planning, and interface and ensure that activities are completed on schedule and within the budget. Prepare project execution and quality plans, projects plan of works, initial projects safety review, initial projects environmental review, and project control system. Coordinate with project managers, discipline engineers, designers, drafters and field staff, and ensure consistency in the execution of project activities. Finalize the definition of project scope, WBS, budget, schedule and objectives. Organize and conduct project meetings, technical, and progress reviews. Coordinate and ensure the quality and accuracy of all project technical deliverables. Review and approve RFQ and IFC packages before the final issue
- Vendor documents control until the approbation stage and as-built. Prepare technical evaluations of supplier's proposals, Follow up the Technical & commercial vendor Evaluation. Technical Bid summaries preparation (ITT, ITB Package), Coordinate and interface with equipment suppliers, Work and communicate with the project management team.
- Excellent knowledge of design, engineering, and safety reviews such as HSE Philosophies, HSE Plans, consequence modeling, process hazard analysis (PHA) or layers of protection analysis (LOPA), hazard analysis, fault tree analysis…
- Conducting safety studies and risk assessments both qualitative and quantitative. Interpret process safety-related legislation and standards
- Knowledge of North American and International codes and standards for Oil, Natural Gas / LNG plant design, including API, ASME, NFPA, and CSA
- Hands-on experience in process simulation software: ProMax, Aspen Hysys, Flarenet, FlareSim, PipeSim, HTRI, MS Project, AutoCAD, Language: English, French
2
JUN 2011 – OCT 2014
WOOD GROUP– OMAN
PROCESS LEAD/CONCEPT ENGINEER
Project Name /Client: EMC project engineering, maintenance & construction – south of Oman – Petroleum development Oman -PDO. Front End Engineering Design (FEED) of the Phase 3A Al Noor Miscible Gas Injection project Design of TEG unit to dehydrate 1.0 MMSCFD sour associated gas using Unisim R370.1. Design of Compressors gas injection to compress dehydrated gas up to 510 bara Design of injection pipeline conveyed gas from the Dehydration facility to the injection wells using Pipesim Deep Water Disposal Systems: Hydraulic modelling of water injection systems using Pipesim. Comprises 20 injector wells, two single 12” internally coated water injection flowlines, connecting two four hub manifolds. Incorporating learnings from NIMR main project, transient
(surge analysis).
Nimr Large FWKO Tank Study: Supervised contractor staff in preparation of project brief and justification. Identification, evaluation and selection of optimum location for the Free Water Knock out tank. Identification of the piping tie-in points to minimize cost and shutdown. NOV 2007 – MAY 2011
PETRO FRAYAND ARYA CONSULTING-IRAN
SENIOR PROCESS ENGINEER
Project Name /Client: LNG Plant- Linde Technology. Capacity: 100mt/Y. Sweetening and Liquefaction Units- IRAN LNG Brief Description: Prepared technology evaluations of various LNG vaporizer options for proposed offshore LNG terminal. Preparation and review of process related documentation for Concept or FEED studies; including process simulations, Heat & Material balance, Process and Utility Flow Diagrams (PFDs and UFDs), Piping & Instrumentation diagrams (PIDs), system descriptions (process and utility systems) and equipment sizing and specification. Coordination of technical information between disciplines internally to ensure design consistency, as well as externally towards clients and supporting the project management team in planning, client interfacing and budget control. Preparation of hydraulic simulations and coordination and review of flow assurance studies. Participation in proposal preparation Possibility to be involved in site supervision and assistance in commissioning and start-up. SENIOR PROCESS ENGINEER
Project Name /Client: Ammonia- Urine plant- PARDIS Petrochemical Second Phase Brief Description: Coordination of a process team carrying out technical activities with the aim of supporting specialists departments and estimators in the preparation of commercial bid for Auxiliary and Utilities systems in Ammonia-Urea Plant. Technical clarification meetings with Client. Involved units:
Primary and Waste Water systems, Steam & Condensate system, Power Generation System, Cooling Water system, Flare systems, Ammonia Refrigerated Storage, Fuel Gas system, Compressed Air system, Nitrogen system, River Water Intake, Raw Water Pre-Treatment System, Potable/Service Water System.
SENIOR PROCESS ENGINEER,
Project Name /Client: BANDAR ABBASS Gas Condensate Refinery Project. SWS (Sour Water Stripping) & ATU (Gas Sweetening /Amine Treating)
Technical Coordination of Process Engineers for Detailed Engineering. Involved Units: Process Units & Utilities Distribution, Flare Systems, Oily Water System, Sanitary Collection System, Heat Recovery Units. Drove process simulation by ProMax PROCESS ENGINEER
Basic Design of Propane De-Hydrogenation (PDH)
MAY 2004 - NOV 2007
ENI S.P.A. - IRAN
PROCESS ENGINEER, DARQUAIN OIL FIELD DEVELOPMENT PROJECT PROCESS INSTRUCTOR TRAINING 70 NEWLY RECRUITED SPECIALISTS PROCESS PLANT SUPERVISOR, SOUTH PARS GAS TREATMENT PLANT PHASES 4 & 5 ASSALUYEH (2MMMSCFD) SEP 1999 – MAY 2004
DAY SHIFT SUPERVISOR & DCS OPERATOR, NATIONAL IRANIAN GAS COMPANY (NIGC) – IRAN SARKHOON AND QESHM GAS REFINARY.
3
EDUCATION & CERTIFICATIONS
EDUCATION
B.SC. IN CHEMICAL ENGINEERING, AZAD UNIVERSITY, IRAN 1994 CERTIFICATIONS
SPT GROUP - FLOW ASSURANCE WITH OLGA COURSE MAY 2010 SCHLUMBERGER - ADVACED PIPESIM JULY 2010
SPT GROUP - ADVANCED FLOW ASSURANCE WITH OLGA COURSE DEC. 2010 SPT GROUP - OLGA FOR WELLS COURSE DEC. 2010
TUV NORD - FUNCTIONAL SAFETY (SIL) JUN 2020
AVEA PRO II - SIMULATING A PLUG FLOW REACTOR USING AN EXISTING REACTION SUBMODEL APR. 2020
- NAPHTHA ASSAY
- DYNSIM AND DYNSIM POWER: OPERATE AND MODIFY A SIMULATION
- USING ELECTROLYTES THERMODYNAMIC METHODS WITHIN PRO/II REV B BR&E PROMAX TRAINING - BRE 102: UPSTREAM FACILITIES BRE 121: AIR EMISSIONS APR., MAY & JUN 2020 BRE 201: GAS PROCESSING BRE 202: LNG
BRE 231: SOUR GAS PROCESSING BRE 232: EQUIPMENT RATING AND SIZING BRE 241: AMMONIA PRODUCTION BRE 251: PIPELINES
BRE 331: CODING WITH PROMAX BRE 211: REFINERY OPERATIONS SKILLS
Process Engineering: Advanced level on overall plant process design, problem-solving in sour gas & heavy oil services, water treatment and steam generation processes. Especially strong inability to integrate plant/field and all aspects of the operation to identify synergies.
Safety Engineering: Attending HAZOP Study session, SIL Study session, HAZID Study session etc., sometime Chairing HAZOP Study. Preparation of Process Safety Flow diagram
(SFD), and Safeguarding Memorandum, Design input to CFD analysis and attending various Risk Assessment Analysis studies comprising, like, Fire & Explosion Risk Analysis (FERA), Evacuation study, Dropped Object Study etc. Firewater and Foam system capacity design, P&ID preparation etc.
Project engineer: Project engineering knowledge for co-ordination with Piping Discipline, Mechanical Discipline, Electrical and Instrumentation Discipline for providing input to Piping Material Specification, PDMS Model review, Critical Piping Stress Analysis Input, Electrical Load List, Black start procedure, Instrument database preparation, Control typical design selection, ICSS FAT attending, Request For Quotation (RFQ) Purchase Specification Input and negotiation with equipment package vendors. Change Order management, official letter preparation. Communication with Client (Major Oil & Gas Companies.)
Project engineers and Management Team. Estimation of man hour for engineering work, manpower planning for department and discipline work.
Instrument & Control Engineering: Review of automation system control diagram (SCDs), automation functionality, ESD Hierarchy, Review and Preparation of Cause & Effect (C&E) Chart, SAFE Chart, ESD Logic diagram. Review and Preparation of datasheets and specification of Automatic ON- OFF Valves, shutdown valves, Control valve, instruments and PSVs. GENERAL ORGANIZATIONAL SKILLS
Leadership Skills: Spent several years as a group leader, section head and superintendent for small to large technical/engineering groups and provided leadership through major organizational changes. Have several years as vice-chair or chair of the various projects;
Organizational Effectiveness: Have been exposed to most of the main organizational design and effectiveness theories and processes. I have participated in three significant organizational redesigns within Imperial and most of the effective training that was used during the implementation of the designs.
Business Skills: Strong understanding of overall business economic goals and driving forces in the oil and gas industry. Advanced understanding of accounting, contracting, control and delegation of authority principles.
Thinking/Mentor Skills: I have had exposure to a lot of new and developing technologies in past assignments. (Especially in oil sands mining and in-situ technologies). Excellent lateral thinking skills, troubleshooting, consulting, presentation and communications skills.
Contact Base: Past work experience has resulted in the development of a large base of technical and business contacts in the oil and gas industry as well as contacts in other chemical industries and the universities.
Contact this candidate