DASARI SRINIVASARAO

Phone:,+91-970*******

Email:add610@r.postjobfree.com & add610@r.postjobfree.com

PROFESSIONAL WORK EXPERIENCE 12.5years Exp

Sidvin Core-Tech (I) Pvt.Ltd

Bangalore, India.

MV31 GUNABARA (FPSO) design engineering in OFFSHORE, oil & gas Piping GADs, piping layout,

Equipment layouts,piping isometrics(E3D)

23June 2018

TILL DATE

ANEWA ENGINEERING PVT.LTD

DEPUTED TO

(SINGAPORE),(U.A.E)

Involving design engineering in Power, oil & gas Chemical Refinery, onshore, Piping GADs

To Rig GADs, Equipment layouts,piping isometrics

June 2015

DEC 2017

PETROFAC(CHENNAI

LAMPRELL SHARJAH

(U.A.E)

Involving design engineering in Power, oil & gas Chemical Refinery, onshore, offshore Piping GADs

To Rig GADs, Equipment layouts,piping isometrics

June 2014

to

May 2015

ZASYA ENGINEERING Pvt.Ltd.

Cyber Towers, Hitec City Hyderabad

(Deputation through )

TEBODIN & PARTNER LLC (Muscat, oman)

Projects involving design engineering in oil & gas

To prepare Plot Plans, Equipment layouts,

Design of Piping Systems, with Knowledge of piping components, Material of construction, piping GADs, Support GADs, isometrics, nozzle orientation etc.

June 2013

To

June 2014

BHEL Hyderabad on behalf of

M/s. Raasi Consultancy service (P) Hyderabad.

Power plant,,Oil & gas Preparation of Preliminary MTO, Equipment and Piping Layouts, 3D Modeling of Equipments, Piping and Structures.

May-2010

to

June 2013

BHEL Hyderabad on behalf of

M/s. Sadasiva computer services. Hyderabad.

Power plant,, Oil & gas Checking and Preparation of GADs view location detailing of piping GADs.

Piping Isometrics and GAD. Spec & Catalogues Creation in Auto Plant.

Feb-2006

to

Aug-2007

M/s. Hemair Systems India Ltd., Hyderabad.

Oil & gas,power plant HVAC Piping layouts drawing Equipments drawings. Piping isometric drawings. Nozzle orientation drawings

Making of AHU Drawings,& DUCT, grill routing position d

May-2002

to Jan-2006

PROFESSIONAL SUMMARY

professional with over 12.5years of experience in the areas of Piping Design Engineering in

Power, Oil & gas Plants, HVAC Chemical, Refinery plants.

Experience in preparing layouts, Modeling of plant Equipments, Piping and Structures.

Checking the feasibility of supports for critical and non-critical supports.

Providing Tie-in Points by approaching Interface spool Philosophy.

Reviewing Equipment Vendor GAD’s and finalizing Nozzle orientations as per feasibility and Design basis.

Checking of Isometrics along with BOM in correlation with P&ID pms& line list.

Interference checking of piping with other equipments, structures & Piping.

Issue of piping deliverables like Isometrics, Pipe support schedule, Tie-in point Drawings, Plate inserts and opening of the floor Details, MTO and Equipment, piping and support GAD’S.

Familiar with relevant Piping codes, standards and materials.

Knowledge and understanding of P&ID, Piping ISO Drawings, GA Drawings, Piping Material Specification (PMS) and Structural GA Drawings.

Layouts and isometrics-process plant: issue/Review of following-plant layout, piping layout and isometric

Drawings on Auto CAD/ 3D-PDMS.

SOFTWARE SKILLS

1.AUTO CAD 2D,3D

2.CADWORX 2D,3D

3.PDMS- 11.5, 11.6,12.0 (Equipment, Piping, Structural, Isodraft, Draft) & E3D

4- REVIEW OF NAVIES

ORGAIZATIONAL EXPERIENCE

1. Name of the company : M/S ANEWA ENGINEERING (P).Ltd Deputed to N.P.C.C ABUDHABI(U.A.E),

: PM GROUP SINGAPORE,

Designation : Sr. PIping Design Engineer

Software used : CADWORX, AUTOCAD,PDMS (MDS),

Projects Handled : PM GROUP GIVAUDAN, ULUTP-UMM LULU UTILITY PLTFORM,

: TATA PROJECTES, ZACKUM OFF-SHORE PROJECT

Basic/ Detail Engg. activity (Piping)

Layouts and Isometrics –Process plant : Issue/ Review of following- plant layout, piping layout and isometric drawings on Auto CAD / 3D-PDMS/CADWORX.

Review of Nozzle Orientation (for vessel,pumps) & Civil information

Wall thickness calculation, Reinforcement calculation, Span Calculation, BOQ/MTO generation.

Inter disciplinary checking of design & detail drawings with other engg. dept to avoid clashing

2. Name of the company : M/S Petrofac. DLF Infocity Ramapuram Manapakkam, Chennai

Designation : Sr. Piping Design Engineer

Software used : PDMS 11.6, AUTOCAD, NAVIS, EXCEL

Projects Handled : Reggene north development,(sharjah)

: Rabbab Harable intigreted, (oman)

Basic/ Detail Engg. activity (Piping)

Layouts and Isometrics –Process plant : Issue/ Review of following- plant layout, piping layout and isometric drawings on Auto CAD / 3D-PDMS.

Review of Nozzle Orientation (for vessel,pumps) & Civil information

Wall thickness calculation, Reinforcement calculation, Span Calculation, BOQ/MTO generation.

Inter disciplinary checking of design & detail drawings with other engg. dept to avoid clashing

3. Name of the company : M/S Zasya engineering (P)Ltd. Cyber towers Hitec city Hyderabad.

Designation : Piping Design Engineer

Software used : PDMS 11.6, AUTOCAD, PDS, MICROSTATION, NAVIS, EXCEL.

Projects Handled :DALLEL PETROLEUM,OXIOMAN,AMININJECTION

Client : TEBODIN & PARTNER LLC (OMAN,MASCAT)

Responsibilities:-

Study of P & ID, Equipment Layout & Plot Plan.

Preparation of preliminary Material take off

Preparing of Piping Layouts using Plot Plans, Equipment GA’s & P&IDs.

Preparing of Insert Plates and floor opening Drawings and schedules

Preparation of Piping Supports sketches and Schedules.

Modeling of Plant Equipments and Structures.

Modeling of Plant Equipments and Structures.

Routing of piping using the developed piping GA’s.

Routing of piping will be done with feasibility of Support.

Interference checking of piping with other equipments and structures.

Extracting Piping GAD’s from the Draft module of PDMS.

4. Name of the company : M/S Raasi Consultancy service (P) Ltd. Deputed to BHEL Hyderabad

Period ;May-2010 to Till date

Designation : Piping Designr

Software used : PDMS 11.6, AUTOCAD, CADWORX EXCEL.

Projects Handled : INDIAN OIL CORPORATION LTD., 100MW (GAS TURBINE).

: NOCL-CODDALORE COMPRESSOR DRIVEN BY GAS

: BHAHMAPUTRA CRACKER AND POLYMER LTD.,COMPRESSOR DRIVEN BY

STEAM TURBINE (1X15MW).

Client : NOCL, BHRAMAPUTHRA CRAKERS AND POLYMER LTD.,

Responsibilities:-

Study of P & ID, Equipment Layout & Plot Plan.

Preparation of preliminary Material take off

Preparing of Piping Layouts using Plot Plans, Equipment GA’s & P&IDs.

Preparing of Insert Plates and floor opening Drawings and schedules.

Preparation of Piping Supports sketches and Schedules.

Modeling of Plant Equipments and Structures.

Routing of piping using the developed piping GA’s.

Routing of piping will be done with feasibility of Support.

Interference checking of piping with other equipments and structures.

Extracting Piping GAD’s from the Draft module of PDMS.

Extractions of isometrics from Isodraft

Detail Extraction & creation of Piping Layouts, Sectional views& Details.

Interdisciplinary Coordination.

5. Name of the company : M/s Sadasiva computer servicesDeputed toBHEL Hyderabad.

Period ;Feb-2006 to Aug-2007.

Designation :Jr. Cad Engineer

Software used : PDMS 11.6, AUTOCAD, EXCEL. CADWORX

Projects Handled : JSW PROJECT LTD., STEAM TURBINE (1X75MW).

Client : JSW

Responsibilities :

Preparation of Specs and Catalogues as per piping material specification using Auto Plant (Bentley).

Equipment, Piping, and Structural Modeling.

Coordinating with other functional department for successful timely completion of project.

Checking and preparation of Isometric Drawings for construction.

6. Name of the company : M/S Hemair Systems India Ltd., Hyderabad.

Period ;May-2002 to Jan -2006

Designation : Design Draughting Engineer

Software used : AUTOCAD, CADWORX

Projects Handled : 1. D.Reddy laboratories

: a) Matrix laboratories

: b) Shashen Chemical Drugslaboratories

Responsibilities :

Piping layouts drawing. Equipments drawings, Piping isometric drawings. Nozzle orientation drawings

Preparing A.H.U Drawings. Preparing A.H.U Position and details Drawings A.H.U Connection details .

Duct Routing Drawings. Grill position Drawings. Duct supporting and hanging Drawings. A.H.U basement

Location Drawings. V.C.D Connecting and location Drawings. Checker plate location and sectional view

Drawings. A.H.U component detail Drawings. Preparing Blower detail Drawings.

EDUCATION

Education/Degree

Institute/College/School

Year of Completion

B.E Mechanical Engineering

Aarupadaiveedu institute of technology chennai

2010

H.V.A.C (Certificate Programme)

Technolocoinstitute in Hyderabad

2002

Diploma Mechanical Engineering

S.G.R.PolytechnicBellarykaranataka

2002

I.T.I (Fitter)

J.M.J .ITC College chinakakani Guntur (A.P)

1998

STRENGTHS

Possess good relationship building and interpersonal skills

Analytical Skills

Hardworking and quick learner

Self-Confidence

Good team player

Quick adaptability to challenging situations

Name : DASARI SRINIVASARAO

Father’s Name : S/O PRASADA RAO

Date of Birth : 10-03-79

Marital Status : Married

Languages Known : English, Hindi, Telugu, Tamil, and Kannada.

Passport No. : L2225770

Salary drawn :

Expected salary :

Permanent Address : Pedakondur(post)

Pedapallem (VIA)

Duggirala (Mandal)

Guntur Dist – 522 503

Andhra Pradesh, India

Declaration:

With reference to the above information I promise to devote myself in the company with my hard work and to use all my knowledge and for company’s business and progress if given an opportunity

Date:

Place: Hyderabad, India (DASARI SRINIVASARAO)

Contact this candidate