S.SIVASHANMUGAM
Contact Number: +91-989*******, 948-***-****.
E- mail : add437@r.postjobfree.com, add437@r.postjobfree.com
OBJECTIVE:
Seeking a position where my experience, training and good work habits will be an asset toyour
company.
Job profile: 25 years of field experience in various areas of Maintenance & Project works & Inspection.Fabrication Works.
At Refineries, Petrochemicals & Power Plant work.
WORK EXPERIENCE: 25 years (Senior Mechanical Supervisor) MECHANICAL ENGINEER.
Present employment:
Working with HDGSK JV KARBALA REFINERY PROJECT IRAQ. As Mechanical Supervisor.
: From November-2018 to January-2020.
Previous employment:
1) COMPANY : RAJU INDUSTRIES
DURATION : April 2016 to September 2018.
LOCATION : Vriddhachalam. Tamilnadu.
2) PROJECT TITLE : Turnaround 2014 &Maintenance Work (WWMT, TFT, MFT)
CLIENT : EQUATE PETROCHEMICAL COMPANY. (KDSC)
DURATION : 04th August 2014 to March 31-2015.
LOCATION : Kuwait.
3) PROJECT TITLE : KNPC LPG Train-4 at MAA Refinery, Kuwait.
CLIENT : DAELIM (NBTC)
DURATION : 01st June 2012 to June 2014
LOCATION : MAA Refinery, Kuwait.
4) PROJECT TITLE : ION EXCHANGE Service Ltd.
DURATION : May 2011 to May 2012
LOCATION : Chennai, ndia
5) PROJECT TITLE : Q CHEM-II Project
CLIENT : DAEWOO & TECNIMONT (CDC)
DURATION : July 2009 to January 2011
LOCATION : Qatar
6) PROJECT TITLE : QATAR VINYL COMPANY LTD.
CLIENT : CDC
DURATION : Feb 2006 to June 2009
LOCATION : Qatar
7) PROJECT TITLE : BHARAT ALUMINIUM COMPANY
CLIENT : CREW
DURATION : October 1999 to Sep 2005
LOCATION : Chatishar, India.
8) PROJECT TITLE : M/s. ENGYEOW Pvt. Ltd.
DURATION : April 1997 to May 1999
Location : SINGAPORE
Nature of work carried out:
PROJECT TITLE : KNPC LPG Tain-4 at MAA Refinery, Kuwait.
CONTRACT No. : Subcontract No. KNPC-LPG4-SC-002
CLIENT : DAELIM
DURATION : 01st JUNE 2012 June 2014.
LOCATION : MAA Refinery
JOB TITLE : Mechanical Supervisor
1.Responsible for Site Preparation work Material segregation for the vessels/Columns.
2.Responsible for mobilizing the manpower for various Vessel Internal activities.
3.Responsible for Installation & Inspection of the Floor trays Draw-off trays Liquid collector trays Feed Distributor pipes, Lattice beams Schopentotoer Packing support & Loading of the Pall
4.Having Work Permit Authorization by the Kuwait National Petroleum Company, responsible for taking different types of permits and implementing the works in safe manner.
5.Keeping a track of schedule and slippage and suggesting necessary action for speed up of work progress.
6.Coordination with Quality, Contractor and Company for Inspection and Work Permit.
7.Studying and Reviewing Method Statement, Drawings(General Arrangement, Assembly, Plan, Isometric, Welding Procedures) and giving necessary instruction to workers to carry out the job as per approved procedures.
8.Managing a work force of 70 personnel and above and ensuring enough work front is available in advance to avoid idling of manpower and equipment.
9.Follow-up & Updating work progress to Superiors as per the Schedule.
10.Pre commissioning activities. (Water flushing, Air Blowing, Air Rupturing )
SPECIAL TRAINING:
1Different Safety classes and Training Programmed attend during my service.
2Attended Permit Executor Training Programmed.
3H2S Training programmer.
4Confined Space Authorization Test.
Maintenance Experience:
1Heat exchangers cleaning, Hytojetting and Hydro testing.
2Blinding and DE blinding of pressure vessels for shutdown maintenance.
3Reconditioning of various types of valves such as Gate valve, Globe Valve, Check Valves, Piston Valves, and Ball Valves Etc.
4Running, Preventive maintenance of the Plant equipment’s.
5Annual Shutdowns of the Plant equipments.
6Cleaning of strainers and filters.
7Lube oil change in rotating equipments.
8Pipelines hydro testing and valve replacements in shutdown.
9Worked in Annual Shutdown of QVC in 2007.
10Changing of trays in columns.
11Blinding and DE blinding for specified jobs.
12Overhauling of single and multi stage centrifugal pumps.
13Alignment of rotary equipment’s using Rot align Pro laser alignment kit.
14Servicing of reciprocating and centrifugal compressors.
15Involved in piping isometric, PID reading & punching in field.
16Involved in pre commissioning & commissioning activities.
17Assisting maintenance engineer in preparing 2 year spares, reviewing and updating the quantity in warehouse.
18Identifying problems in rotary and stationary equipments and carry out and prepare right SMP for disassembling and assembling.
19Diagnose Fault and trends for preparing Root cause analysis of mechanical equipments Failure.
20Preparation for Turnaround such as reading equipment drawings & arranging spares like gaskets, bearings, trays, Spargers, etc.
21Knowledge of API & ASTM codes & industrial standards.
22Making blind list & arrangements like arranging scaffolding, insulation removal, arranging special tools, lifting, etc.
23Active member of plant modification team based on process de-bottle necking and HAZOP study.
24Attending safety meetings, reporting Incident or near misses if any, Safety walks, Emergency action plans and exercise.
25Involved in GTG GE frame6 routine maintenance.
26Job package preparation for heat exchangers hydro jetting, pressure testing.
27Trained for Plastic pipes welding, GRP lamination.
28Rubber lining of pipes, vessels, structures, etc.
29Experience of using temporary repairing kit like using Belzona, Chesterton, etc.
30Knowledge about online leak arresting like Fermunating.
31Total water and waste water management solution
PROJECT EXPERIENCE: Reviewing the dossiers submitted by the company contractors, the dossiers are: Mechanical, Electrical, Instruments, Piping, Civil and Steel Structures.
Ensure that the reports and check advises are written correctly.
Ensure that the job mentioned in the dossiers are done and complete and must be written in the matrix as 100%.
Ensure that the documents and certificates are filed correctly and accordingly.
Ensure that all certificates in the dossiers must be reported in the matrix.
Ensure that the certificates reported in matrix must be in the dossiers.
Ensure that all certificates and documents in the dossiers must be signed by proper authorities.
Ensure that all the Engineering drawings in the dossiers must be available in the data base (Webtop).
Ensure that all priority punch list must be closed or cleared.
Return the dossiers to contractors for any errors, discrepancies, or for missing documents.
Submit the corrected dossiers to company representative for approval.
Approved and rejected dossiers are both return to the contractors.
Stage wise inspection of Heat exchanger, Vessels and Columns fabrications. Inspection of Shop Fabricated Tanks, Piping Spools as per drawings.
Arrange NDT as per code and specification.
Inspection of Hardness test, Pneumatic test, Hydro test.
Hydrostatic/pneumatic/water fill test inspection.
Inspection of pre-shipment of the Equipments.
Finally check all the Equipments are installed in as per PID & as built Drawing.
Handling a Worksite to ensure safe work practice.
Check the Alignment of the Rotary Equipments and preparation of reports.
Perform final Visual & Dimensional inspection of the Equipments and Preparations of reports.
Check the Surface Preparations & Painting Inspections.
Interact with QA/QC Team
General Work Skills:
1.Fabrication, erection, inspection, testing of various piping system related to oil and gas, refinery, power and unit piping as per isometric and general assembly Drawings.
2.Fabrication of shop joint of all nozzles and shells for tank erection of various thicknesses and arrangement for PWHT co-ordination.
3.Planning and erection sequence as per site condition and job assignment to client engineers.
4.Identification of loops for hydraulic testing and preparation of test loops and B.O.M for the same.
5.Material identification jig fabrication and erection to clear routing.
6.Fit up inspection as per isometric drawing and monitoring the welding of pipe spools.
7.Coordinating with process engineers to resolve site related constraints.
8.Test package clearance and related documentation works.
9.Coordinating with clients for getting clearance and approval for the same.
10.Erection of spools/shell plates fit up and welding monitoring.
11.Monitoring deviation in shells and pipe alignment after welding, plumpness, roundness and ovality on pipes after bending.
12. Mechanical inspection as per P&ID.
13.Arrangement for supports like jigs and fixtures for shell plates and pipe spools to avoid local deviation in shop and erection joints.
14.Testing of the system.
15.Preparation of as built drawings.
16.Implementing safe working procedures as given by national safety council inside working refinery.
PERSONNAL DETAILS
Date of Birth : 12-03-1969
Sex : Male
Nationality : Indian
Marital Status : Married
Passport Number : Z 2520084
Place of Issue : Kuwait. 11 -06 -2013
Date of Expiry : 10 - 06 -2023
Qualification : D.M.E (DIPLOMA IN MECHANICAL ENGINEERING)
Language Known : English, Hindi, Tamil, Telugu and Malayalam.
Software Knowledge : Autocad, MS Office.
Present Salary : 3000.USD + perks monthly
Expected Salary : Negotiable
Skype ID : pravin.s2008
DECLARATION:
I declare that the above information and details given by me is correct to the best of my knowledge.
S.SIVASHANMUGAM