Garry Haney

QA/QC lead hand

Calgary, AB T*R*L*

add3j0@r.postjobfree.com

403-***-****

• Garry Haney

#*** *** ** ***. *.W

Calgary, Alberta. T2R0L3

Ph. 403-***-****

Email; add3j0@r.postjobfree.com

Working as a Q.A./ Q.C. inspector and NDT coordinator. The areas of expertise acquired are as a lead hand, welding inspector, hydro testing and air testing, data entry and weld mapping, welding consumables control, document control within the QC department, inspections on coatings, NDE coordinating, pile mapping, structural and pressure welds. visual inspections and turn over of document to the client. I currently poses a CWB welding inspector to B 31.3 and a CGSB level 2 certification, RT

Attended the Southern Alberta Institute of Technology, to obtain certification to W 178.2 welding Inspector, also a year long program for NDE Inspections, Destructive and non destructive.A program utilizing holographic images of air craft tires, and acoustic emissions as is currently in use by the Boeing firm onboard all of there aircraft and last, inspecting aircaft weels with eddy current. If you require copies of my diplomas, simply ask and I will forward them to you. I have acquired experience working on pipelines, gathering systems, compressor stations, gas plants, oil refineries and oil sands refineries sag- D and fabrication facilities. If you should have any further questions which you would care to ask me, please feel free to contact me.

Regards; Garry Haney

#readytowork

Willing to relocate: Anywhere

Work Experience

QA/QC Inspector

Various Temporary Jobs - Alberta

February 2015 to December 2019

1. Inspector at the Conoco Phillips Surmont project, on a engineered pipeline. Performing visual inspections on pressure welds and structural welds. Mapping and maintaining a weld log. Witnessing hydro tests, and documenting turn over packs on walk downs, with the client. QC inspector. The duties, manager

Revcon - Kirby Lake, AB

April 2012 to May 2014

I was responsible for while working here are as a welding inspector, hydro testing, structural steel and pressure welding inspections and mapping, coordinating NDE, inspections on faulty equipment and damages to received equipment. The project is now completed. QA/QC

Cobra lp. - Various locations

January 2012 to December 2012

Working on mechanical inspections and installations of piping Systems, hydro tests, creating work packages, nde

coordinating, weld mapping, material receiving, also putting together and turn over of documents to the clients, Including Alberta Boiler Branch forms of compliance.

Quality Control Inspector, managerial

Laser Energy Inc

2011 to 2011

Preparing documents,

Welding supervision, material control, document turn over Weld mapping, welding inspections, document control, red Lines, all concerns related to QA and Q.C. Working there for six months. lead inspector

Laser Energy - Edmonton, AB

2009 to 2010

performing all tasks which a

Q.C inspector undertakes. Making up ITPS, AB- 83s, for the boilers branch. visual Inspections, weld mapping. Turning over documents to the client. All functions associated with associated with QA/ QC.

Q.C. / Q.A. inspector

Phonex Ind. - Long Lake, AB

2007 to 2008

Carrying out all of the duties of a Q.A./ Q.C. inspector. Working modular installation and reworks and repairs on existing units within the plant.

Including coordinating of all N.D.E. activities.

Along with all structural welding inspections.

Mapping welds and maintaining a weld log.

QC welding inspector

Bentall - Edmonton, AB

January 2005 to November 2007

1. 2005-2007

Working at the Petro Canada refinery expansion, as a lead inspector. I was previously employed by Bectal constructors.

Working as an area welding specialist, Q.C. inspector. Also as a lead hand in different areas of the project. Performing duties such as.

Auditing various offices turnover documents.

Structural inspections, N.D.E. coordination and auditing, rod room audits and documentation turn over,

moaning completed lines to ensure completion and structural inspections, hydro testing, weld mapping and generally any of the QC functions there. Including pressure welds visually inspections. QC Inspector

Shell - Peace River, AB

2004 to 2004

2004

Was employed by Shell at the Peace River facility. Working on a experimental project for extraction of oil from tar-sands. I was a welding inspector while employed there. A sad-d project, but using electrical heat, rather than steam.

QC Inspector

South Peace Inspection Services - Peace River, AB

2003 to 2003

Performing non-destructive testing and visual welding inspections on a wide variety of projects in Alberta and Saskatchewan, for All

Test Inspections.

QC Inspector

Shell Canada - Fort Saskatchewan, AB

2002 to 2002

Responsibilities

Q.C./welding / vessel inspector and boiler turn over. Working for Shell at the Scots ford expansion project in Fort Saskatchewan Alberta.

Q.C. welding inspector at the Suncor

Q.C

2001 to 2002

Bectal, on the Suncor expansion project. Working as a Q.C. welding inspector. And NDE coordinator. NDT technician

AM Inspection services

1998 to 2000

for various projects mostly working for Trans Gas in Saskatchewan. QC Inspector, NDT inspector

Superintandents - Alberta.

1995 to 1999

Working for Supco, as a NDT technician and as a visual welding inspector. Working on pipelines and in fabrication facilities. Various locations. QC inspector, lead hand

Western Rock Bit - Crossfield, AB

1993 to 1995

Building vessels, skid packages and alterations and repairs of existing Vessels. Also outfitting trucks with there vessels. QC Inspector

Western Rock Bit - Crossfield, AB

1990 to 1994

Working as a QC inspector, for Western Rock Bit in Crossfield, Alberta. Building vessels, skid packages and alterations and repairs of existing

Vessels.

QA/QC Inspector

Shell - Cocrane Alberta

February 1989 to November 1989

1989 Working for Shell, Jumping pound facilities performing vessel alterations. Welding inspections, NDT coordination's, hydro testing and inspecting piping runs. QC Inspector

MMP Quality Inspections - Los Angeles, CA

1987 to 1988

Performing visual welding inspections on turn arounds and repairs at various refineries around the city. Also inspecting pipelines on the islands just off of the California coast Q.A./ Q.C. welding and equipment inspector

Come by Chance refinery - Newfoundland and Labrador 1986 to 1986

at the Come by

Chance refinery in Newfound Land. Taking the refinery out of moth balls into a producing refinery after being mothballed.

QA/ QC welding inspector

IP. Constructors in Calgary

1985 to 1985

working for IP. Constructors in Calgary. A fabrication facility building skid packages, piping systems and vessels.

1884

QA/QC welding inspector at Western Rock Bit in Crossfield Alberta. Building Vessels, skid packages and repairing vessels for clients. Welding inspector and NDT technician.

Consolidated x-ray out of Calgary - Calgary, AB

1974 to 1984

Mostly working for Trans Canada and Nova on pipelines,. Also working as a welding inspector on bridges, pipelines and fabrication facilities. And began working at the Syncrude site. As a QC Inspector. Education

Associate

SOUTHERN ALBERTA INSTITUTE of TECHNOLOGY

1994

Skills

• Excel (10+ years)

• Leadership Experience (10+ years)

• Quality Management (10+ years)

• Lean Manufacturing (10+ years)

• Construction Inspection (10+ years)

• Construction Experience (10+ years)

• Quality Control (10+ years)

• Inspection (10+ years)

• Quality Inspector (10+ years)

• Blueprint (10+ years)

• GD&T (7 years)

• Driving Experience (10+ years)

• Commercial Driving Experience (10+ years)

• As9100 (6 years)

• Caliper (10+ years)

• Micrometer (10+ years)

• QA

• Aerospace (3 years)

• Data Collection (10+ years)

• Calibration (10+ years)

• Microsoft Office (10+ years)

• Time Management (10+ years)

• Manufacturing Experience (10+ years)

• Maximo (2 years)

• Microsoft Word (10+ years)

• Process Engineering (2 years)

• Computer Literacy

• Yardi

• Quality Assurance (10+ years)

• 10 + years (10+ years)

• Blueprint Reading (10+ years)

• Calipers

• QA/QC

• Quality Inspection (10+ years)

• Boiler (6 years)

• Document Management (10+ years)

• ISO 9001 (8 years)

• Non-destructive Testing

• SolidWorks

• Quality Audits

• CAD

• Supervising Experience

• Coordinate Measuring Machine

• Packaging

• Microsoft Excel

Certifications and Licenses

Program to w187.2, for welding inspections and general requirements for certification.

September 2002 to Present

Additional Information

For the last three years I have been working shut downs in Canada.

Contact this candidate