Anthony Frank

**** ****** **.

North Highlands Ca. 95660

916-***-****

add2rz@r.postjobfree.com

OBJECTIVE: I would like to attain a position with a modern minded company that will fully utilize my diverse experience and advanced levels of expertise to enhance and increase the factory maintenance groups performance and efficiency.

EXPERIENCE:

9/19 to present: NoCal Beverage, West Sacramento, CA.

Line Maintenence: Maintain and repair all equipment and facilities used in a bottling plant. Determain root cause of featuring equipment issues and propose a possible solution. Get chemical engineering storage area under control and in compliance with OSHA requirements.

9/18 to 8/19. . Intercoast College, Rancho Cordova, Ca.

Instruct Electrical Theory and NEC code. My specialty was motor controls and instrumentation.

5/17-2/18. National Career Education, Citrus Heights, Ca.

Instructor Electrical Technologies: Instruct Electrical Theory and NEC code. My specialty was motor controls and instrumentation.

8/14-1/16. Milgard Windows, Sacramento,

Senior Plant Electrician: Night shift Electrical /Maintenance Supervisor. To oversee and supervise all aspects of equipment and facilities maintenance. To engage hard downs w19ith an action plan. To insure a proper information exchange occurs if a down machine extends to next shift.

9/13-2/14 Amcor Containers, Fairfield, Ca

Senior Plant Electrician: Responsible for maintenance and repair of Blow Molding and packaging equipment. Installing new equipment and upgrading existing equipment. Training personnel in proper electrical safety and troubleshooting methods

3/11- 2/13 Sacramento Containers Corp. MC McClellan, Ca

Senior Plant Electrician: Responsible for every aspect of the Factory electrical, electronic, electromechanical automated factory equipment. This covered UPGRADES, PM DEVELOPMENT, SAFETY TRAINING, and HIGH VISIBILITY DOWNS.

6/08- 2/11 Coca Cola American Canyon Bottling Plant, American Canyon, Ca

Plant electrician/Line maintenance: With Coca Cola I troubleshoot the equipment (both electrically and mechanically) as well as develop and perform the maintenance routines (working towards maintenance excellence). I am also in charge of the plants boilers, chemicals as well as maintenance. Light PLC work (5, 500, and 5000), VFD, 4-20ma / 3-15psi closed loop control systems…etc.

1/08 -6/08 Tradesmen International, Sacramento, Ca (Contract Blue Diamond Almond)

Plant Electrician: As the plant electrician I was responsible for anything and everything electrical in the factory. All facility modifications, all automated equipment (this included PLC programming changes)…contract position

11/06 -12/07 Priority Industrial Service, Stockton- Napa, CA

PLC Technician (contract positions): I have contracted out at various commercial sites as a PLC Technician / Line Technician / Equipment Electrician. In this capacity I troubleshoot logic issues with the equipment as well as support the line in electrical / electronic equipment issues. (Troubleshooting electrical / electro-mechanical issues). Additionally I worked with factory staff on line upgrades and expansions. contract position

5/05-10/06 Silgan Containers Inc. Sacramento, Ca.

Plant Electrician: As the plant electrician I was responsible for anything and everything electrical in the factory. All facility modifications, all automated equipment (this included PLC programming changes).

9/02- 4/05 SK Daifuku Inc. Salt Lake City, Ut.

Field Service Engineer: My Position with SK Diafuku is to repair and maintain automated inventory equipment used to track and store product wafers at Intel D1C and D1D development Fab.

EQUIPMENT: CLS50 (automated stocker) CMS50 (automated stocker) Clean way 600 (vehicle transfer system)

3/98- 8/02 SEMITOOL INC. Kalispell, Mt.

Site Supervisor: As Site Supervisor I coordinated the installation of equipment with the customer and various subcontractors (IE. electricians, pipe fitters, carpenters). Additionally I also insured that the installation was on time and conforming to the contracted requirements as well as sending regular written status reports to the main office.

EQUIPMENT: Spray acid etch, Spray solvent, Magnum fully automated batch acid / solvent and Storm box washer. Single wafer tools were the Equinox Bevel etch, Solvent, Gold and Copper plating tools. Also L210 plating tool and L310 300mm plating tool.

10/95-3/98 S & K Products Inc. Chestnut Ridge, NY.

Senior Field Service Engineer: My position was to manage, maintain, up-grade and support Beta site and production PLC controlled (Mitsubishi and Allen Bradley) semiconductor-processing equipment throughout the Western United States and Asia Pacific Theater. I also performed the duties of a Project Manager ensuring that all aspects of the installation were on time and within budget.

EQUIPMENT: IPA vapor dryers used in wet benches (Stagg, Ultra Fab) and IPA re-processor (reclaims waist IDA).

10/89-10/95 APPLIED MATERIALS Santa Clara, Ca.

Field Service Engineer: I started at applied in the Applications lab as an engineering technician working with new products and customer demos on the P5000. Later I was promoted to a Field Service Engineer and stationed at Intel's D2 facility in San Jose.

EQUIPMENT: P5000 (CVD, SACVD, Polly etch, Aluminum etch, Photoresist strip) 8330 (Aluminum etch)

12/84-4/86 HENRY GILFOY INSTRUMENTS Morgan Hill, Ca.

Instrumentation Technician: My role with Gilfoy was to calibrate, install and troubleshoot a variety of different types of instrumentation and control systems at various locations throughout the bay area, Stanford Linear Accelerator Center and Kaiser Cement to name a couple.

EQUIPMENT: Automated conveyors, PH systems, resistively systems, closed loop temperature controls. I worked with all the standard industry instrumentation signals (IE. 4-20ma, 1-5 V, 3-15 PSI.).

06/82-12/84 NASA (Ames Research Center) Mountain View, Ca.

Systems Technician: Served apprenticeship at NASA. Worked with various sequence interlocking systems (IE. ladder logic), servo controls, and power management systems, including high voltage O.C.B's(Oil circuit breakers) used in substations (Voltages up to 100kv)

EQUIPMENT: 80’x120’ Wind tunnel, Plasma arc heaters, and Substation switchgear.

EDUCATION:

San Jose Voc. Center- San Jose, CA

Certificate of two-year advanced level program in Industrial Elect. /Electronic systems. Second year

Student Teacher 960 hr. lab and theory, Certified 6/82

NASA (Ames Research.) Moffett Field, Mountain View, CA

Completion of Apprenticeship Program in control circuits systems and

substation networks (HIGH VOLTAGE)Completed Apprenticeship 9/84.

Condie College – Campbell, CA

AES in Electronics Sciences (800 hr. of lab and theory 6/86)

San Jose State – San Jose, CA

BSE in factory automation (Pending completion)

OSHA 10 – Beaverton, OR

Certified

SUMMARY OF SKILLS

Control Circuits My knowledge of control circuits for motor and process control is state of the art. I have excellent background with a broad selection. CPU controls (networked to sub-components via Ethernet or serial communication). My PLC experience is primarily with Allen Bradley type PLCs (SLC5,SLC500 and SLC500) interfaced with Rockwell software and some work with Mitsubishi and Siemens PLCs as well. This covers ladder logic application troubleshooting and minor program modification. As for motor controls I have worked with VFD controlled units as well as standard motor control circuits. In relation to instrumentation I am well versed in all types of control circuitry, 4-20ma 1-5 VDC, 3-15 PSI…Temperature: (TC, Thermistor, RTD, ECT).

Pressure control: (PSI and Vacuum) closed loop with a throttle or mixing valve and open loop. (Transducer, TC gauge or Baratron. Flow control: Monitor open loop or controlled closed loop, MFC, flow meters. VFD, Thayer Scale, Auto Weight, and LVDT

Boilers Knowledge of both Chemical and system maintenance of low pressure boiler systems (90-110 psi).

RF / Microwave: I have worked with both RF and Microwave systems. Impedance matching networks, wave-guides, control circuits and power supplies.

Electronic: I am well suited in trouble shooting both digital and analog circuits to the component level if needed. As well as the use of a oscilloscope, all manners of DVMs. Troubleshooting to component level. Full knowledge of AC/DC theory as well as Digital theory. Soldering and building prototype circuits on a breadboard or PC board.

Electromechanical: I have worked with a wide range of various Electromechanical devices and systems. HVAC, Wind Tunnels, Kiln controls, back-up generators and OCBs to list a few.

Electrical: Knowledge of all types of electrical wiring and coding ( NEC ) ranging from residential to industrial (Certified June 1982).

Hydraulics / Pneumatics I have worked with both Hydraulic and Pneumatic actuated systems and have a complete understanding of both. Rams, Cylinders, hydraulic pumas.

Chemical Monitoring & Vacuum Pumps /

Gas Delivery / Delivery I have 10+ years of experience working with variety of vacuum pumping systems and chemical delivery / monitoring systems, both glasses and liquids. This includes vacuum pumps ranging from Cryo-pumps to Roots Blower / backing pump stacks. I have worked extensively with Polly, Teflon, and Stainless lines used in delivering both glasses and liquids.

Schematics / Drawings /

Drafting / Machining: I can read mechanical, electrical, structural, and electronic schematics. I also have basic machining skills with hand operated Mills, Laths. I can weld using an orbital welders, gas welders and rod arc welders. I can also create basic mechanical and electrical drawings using Autocad.

Computer Skills: I have been working with PCs since 286 CPU types. I have an expert level in DOS based applications as well as a near expert level with windows applications (Windows 3.11, WIN95, WIN98, XP and some LINUX). As well as an excellent understanding of SECS II and networking protocols, applications and hardware.

In relation to office software I am well versed in Microsoft office applications such as Outlook, Word, Excel and MS Projects (Cert 1999).

E. R. T. / FIRST AID: Although not currently certified I have been fully trained in both Chemical Safety (MSDS, Decontamination, handling, spill containment and clean up) and First Aid (CPR, first-aid, and chemical exposure). At Applied Materials and Aromat I was an active member of their E. R. T. teams.

Organization / Communication: I have managed many projects during my time as a field engineer and have no problem with writing daily reports, planning out a project (using Microsoft Projects). Budgeting both time materials and other contractors into a completely unified group for the purpose of a timely completion of the project.

Contact this candidate