MOHAMMED AATIF UMAIR
Email: add157@r.postjobfree.com
SAP# 80002806
MOBILE: +917*********
PERSONAL DATA
DATE OF BIRTH : June 02, 1979
NATIONALITY : INDIAN
QUALIFICATION : Bachelor of Engineer
GULF EXPERIENCE : 12 Years
TOTAL EXPERIENCE : 16 Years
DRIVING LICENSE : Valid Indian / Saudi Driving License
POSITION APPLIED : Instrumentation and control systems engineer
PROFESSIONAL EXPERIENCE
Oct 2016 Dec 2019
Saudi Aramco (Dhahran EDRC)(PKG#7) QC Supervisor (E,I & C)
Jul 2014 Sep 2016
Saudi Aramco (Rastanura Refinery) QC Inspector Instrument and Control systems
March 2013 – Jun 2014
Saudi Aramco (Juaymah Tank farm) Project Engineer Instrumentation & control systems
Dec 2010 – Feb 2013
Saudi Aramco (Rastanura Terminal south) Instrument & Ctrl system Engineer
Jul 2010 – Dec 2010
Saudi Kayan (Sabic-HDPE) QC-Instrument and control system Inspector
Jan 2008 – Jun 2010
Saudi Kayan (Sabic-Poly carbonate) QC-Instrument and control systems Inspector
Sep 2006 – Dec 2007
Gulf Farabi QC-Instrument Inspector
Feb 2004- Aug 2006
Sol Chemical Industries Junior Engineer
PROFESSIONAL EXPERIENCE:
Oct 2016 to Mar 2019
Client : Saudi Aramco
Company : Khonaini International company Limited
Project : EDRC Package-7.
Location : Dhahran
Position : QC Supervisor (Electrical, Instrumentation and telecommunications)
Job Descriptions
Implement quality control procedures in accordance to project quality control plan.
Responsible for supervising and witnessing the work activities according to quality standards.
witness continuity and Insulation resistance test on low and medium voltage cables before and after cable pulling.
Responsible for supervision and witnesses of work activities related to solo run testing of pump motors.
Responsible for supervision and witness of installation and testing of transformers, package substations, (LV&MV) switch gears and Motor control center(MCC).
Monitoring the ongoing inspections on the site and making sure the QC Inspectors are full time available to perform the Inspections.
Maintaining the calibration log for the measuring equipment’s.
Preparing the two weeks look ahead inspection schedule and submitting it to the client.
Coordinating with client inspection representatives for closing the LBE’s.
Coordinating with QC Inspectors for raising INCR if the work is not as per the standard and specifications.
July 2014 to Sep 2016
Client : Saudi Aramco
Project : 3rd Party System Interconnection Cogeneration Facilities.
Location : Rastanura Refinery
Position : QC Inspector (Instrument and Control System)
Job Descriptions
Ensure that installations of Instruments at Site as per IFC Drawings, Data sheets and Hook up Drawings.
Review SATIP, SAIC, SATR and Method of statement and quality notification documents.
Responsible in preparing RFI and conduct site inspection with client inspector.
Responsible in preparing documentation related to material receiving RFI’s based on inspection levels.
Conducted site visits with designers for finalizing the cable tray routing design.
Coordinate and prepare various documents such as test, inspection reports.
Involved in preparation and review of loop folder, loop check procedure before releasing it for loop check.
Monitor Calibration of Field Instruments as per SAUDI ARAMCO standard procedures.
March 2013 to Jun 2014
Client : Saudi Aramco
Project : Upgrade Fire alarm siren system
Location : Juaymah Tank farm
Position : Project Engineer
Job Descriptions
Involved in installation, pre-commissioning and commissioning of push buttons, heat sensors of booster pumps and fire alarm siren for the entire tank farm.
Coordinating with the PLC vendor for the installation of Input and output modules in the existing switch rack of control room and upgrading the system.
Involved in loop check activities as per standard procedures with all the relevant loop folder documents.
Supervision of Instrument home run cable laying, branch cable laying, testing and termination.
December 2010 – Feb 2013
Client : Saudi Aramco
Project : Upgrade Auxiliary Equipment
Location : Rastanura Terminal South
Position : Instrument and Control system Engineer
Job Descriptions
Involved in Pre-commissioning, commissioning and Startup of two Aramco supplied Atlas Copco Instrument Air compressors of capacity 125 PSIG.
Involved in Pre-commissioning, commissioning and Start Up of two Aramco supplied SPX Instrument AIR DRYERS.
Installation and SAT of new DCS Experion C300 system including server cabinet, system cabinet, network cabinet, console and marshalling cabinets.
Transfer of Nitrogen Storage Tank Signals from one control Room to another control room.
Transfer of Substation and PIB Signals from old control room to new control room.
Responsible on site for the installation, layout and construction based on project technical specifications and Aramco standards.
Involved in Calibration of Field Instruments at Workshop & on site as per approved standard procedures.
Involved in loop check activities as per standard procedures with all the relevant loop folder documents.
Installation and termination of power cables from UPS and NON UPS Panels to the newly installed Marshalling Cabinets
Supervision of FOC cable laying and termination.
Supervision of Instrument home run cable, branch cable laying, testing and termination.
Installation of Yokogawa Transmitters (Pressure, Temperature, Level, Flow).
Responsible For Pre and Final Loop Checking.
Testing and Pre-Commissioning of Smoke Detectors installed inside the Marshalling cabinets.
July -2010 up to Dec-2010
Position : Quality Control Inspector
Client : Saudi Kayan Petrochemical Company
Location : Jubail, K.S.A
Project : HDPE
Job Descriptions
Ensure that installations of equipment’s at Sites conformed to Local and International Standards such as NEMA, NFPA, ANSI, ISA, and were primarily based on the Construction Drawings and Specifications Copies to Construction Manager / Quality Manager.
Review Inspection test Plan, Method of statement and quality notification documents.
Responsible in preparing field inspection notification package and conduct site inspection with client inspector.
Coordinate and prepare various documents such as test, inspection reports, safety approval prior to implement of work.
Involved in preparation and review of loop folder before releasing it to client for loop check.
Monitor Calibration of Field Instruments at Workshop & on site as per approved standard procedures
Di involved in drafting the work procedure for Instrumentation in conformance to Engineering Standards, Engineering Safety guidelines and policies.
Inspe .
January, 2008 – June 2010
Position : Quality Control Inspector
Client : Saudi Kayan Petrochemical Company.
Project : Poly carbonate
Location : Jubail, K.S.A
Job Description
Ensuring the installation per approved drawings & specifications.
Check and review QA / QC Documentation
Review Inspection test Plan, Method of statement and quality notification documents.
Responsible in preparing field inspection notification package and conduct site inspection with client inspector.
Coordinate and prepare various documents such as test, inspection reports, safety approval prior to implement of work.
Verification of completeness and corrections of inspection reports.
Review turnover packages on documents from construction and startup/ commissioning department.
Verified /checked on site if the installation layout on construction is based on project technical specifications and standard practice of work.
Installation of instruments as per approved hook-up drawing.
Calibration of Instruments/ Detectors/ Control Valve & Shutdown Valve (On/Off Valve, Actuators, PID
Controlled Valve, Relief Valve, Temperature, Pressure, Differential Pressure, Flow, Level, Vibration, Detectors, Analyzers, Switches, Alarms and Sensors).
Install, maintains, repairs, overhauls, calibrates and tests a wide variety of industrial instrumentation that record, indicate, control and regulate level, flow, pressure, temperature, position and water analysis.
Standard termination of signal and power cables.
Loop check, bench and site calibration
Sept .2006 – Dec. 2007
Position : Quality Control Inspector
Client : BIN LADEN.
Project : Gulf Farabi Project
Location : Jubail, K.S.A
Job Description
Review Inspection test Plan, Method of statement and quality notification documents.
Responsible in preparing field inspection notification package and conduct site inspection with client inspector.
Coordinate and prepare various documents such as test, inspection reports, safety approval prior to implement of work.
Verification of completeness and corrections of inspection reports.
Review turnover packages on documents from construction and startup/ commissioning department.
Verified /checked on site if the installation layout on construction is based on project technical specifications and standard practice of work.
Preparation of documents & drawings, material inspection, witness calibration of various electronic/ pneumatic instruments & verify against specification & data sheet.
JUL .2003 – AUG. 2006
Position : Junior Engineer
Company : SOL PHARMACEUTICALS LTD.
Location : Karnataka, INDIA
Job Description
Worked as Junior Engineer responsible for maintenance and operation related activities.
Involved in documentation of the shift wise production.
Install, maintains, repairs, overhauls, calibrates and tests a wide variety of industrial instruments.
Co-ordination with the PLC and Instrument vendors.