R. MURALI
) 995-***-**** *: add0qw@r.postjobfree.com
SENIOR PIPING DESIGNER
A position as Piping Designer 13 years of Experience in FEED, Pre-FEED, Design & Detail Engineering of Varies Oil and Gas Offshore & Onshore, Petrochemical projects.
OBJECTIVE
To work in a well-reputed organization with international standards to improve my skills, share my thoughts, and improve the organization.
Key Areas of Expertise
Preparation of Plot Plan/Equipment Arrangement Plan for Small Unit or Skid / Modular package
Tie-in Drawing Generation, Piping study according to design basis and plant layout.
Working Knowledge of Mid-level to large scale projects in oil and gas and refinery industry.
Piping Designing of some of the standard piping modules like: Pump Piping, Column Piping, Exchanger Piping, Tank Piping, Vessel / Drum Piping, Pipe Rack Piping, Heaters / Reformers Piping, Modular Concept etc.
Piping Concepts Like Steam Tracing, Jacketed Piping, IBR Piping.
Codes – Standards of Statutory Regulations and Requirements of Refinery and Petrochemical Industry.
Knowledge of Piping / Equipment Operation and Maintenance Requirements to be taken Care while Developing Layout.
Knowledge of Piping Isometric and Piping GA Drawing Extraction and Checking.
Clash & Consistency checking of piping, preparation of line list & interconnecting PID. Modeling of Piping, Equipment, Structural -Civil, Electrical & Instrumentation items and generation of drawings using 3D design tools.
Conducting Model review with Navisworks freedom and simulate
BOM extraction for piping items
Piping material specification, support standard, design basis and other piping specifications
Review and checking of modeling.
Piping load data for civil / structure department
Co-checking & commenting drawings from vendors and other disciplines
Resolution site queries
Should be conversant with P&IDs, Instrument hook ups structural drawings etc. & its effect on piping engineering.
Deciding nozzle orientation of static or process equipments& preparation of nozzle orientation sheets or commenting on vendor drawings of equipments.
Adequately handled routing & supporting of stress critical as well as process and utility pipes as per the standards, special support sketches, etc.
Review and monitoring of project throughout the project cycle.
People Management Skills: Ability to train the people if required. Conduct periodic project reviews, understand the challenges faced by the team and resolve them.
Training and development of Jr. Designers – should be able train the designers who are not familiar with above listed activities. Monitor and mentor them with company specific tools and Procedures.
Develop new procedures to improve the productivity and Quality.
Software Exposure
PDMS 12.1 sp4.44
E3D 2.10
SP3D 2016 (11.0)
Plant 3D
Auto CAD 2019
Micro station V8i
Educational Summary:
B. Tech (PT) - SRM Institute of Technology, SRM University, Chennai, Dec. 2012, 84%.
Diploma in Mechanical Engg. – M.A.P College, Kanchipuram, April 2007, 81.7%.
12th Standard – Govt. Higher Secondary School, Karunguzhi, April 2004.
10th Standard – Govt. Higher Secondary School, Karunguzhi, April 2002.
Professional Experience:
Ramboll India Pvt Ltd Chennai.
Senior Piping Designer Nov 2019 to Till Date
Project Accomplish - AL SHAHEEN FIELD DBN PWM A and B locations
Produced Water Management FEED
Client – North Oil Company
Job Responsibility:
FEED phase are Design and Adequacy check of effected equipment / structures for the modifications required at A & B Locations for Produced Water Management (PWM – A&B), Reid Vapor Pressure (RVP – A&B) and Outboard Slots (OBS – A), denominate the DBN PWM PROJECT.
The objective of DBN PWM FEED is to conduct all required engineering design & analysis, safety studies and 3D Modelling for the required modifications before the EPCIC phase.
Plot Plan, Equipment Layout & Piping Layout Involved For X-Mas Tree Orientation, Lower Deck, Below Lower Deck, Main Deck, Mezzanine Deck, Cellar Deck.
Project Accomplish - MP-623 PRODUCED WATER PIPING CHANGE -OUT SOUTH ARNE CENTRAL
Client - HESS DENMARK ApS, Denmark.
Job Responsibility:
Preparation & Checking of Piping Layout, Isometric and pipe support drawings.
Study and review of Piping Routing supports and its Feasibility.
Co-ordination with client and interdisciplinary departments.
Project Accomplish - Maydan Mahzam (PS2) Re-Development and Bul Hanine (PS3)
Life Extension project Pre-FEED
Client - Qatar Petroleum
Consultant – Wood, United Kingdom.
Job Responsibility: -
Plot Plan, Equipment Layout & Piping Layout Involved For X-Mas Tree Orientation, Lower Deck, Below Lower Deck, Main Deck, Mezzanine Deck, Cellar Deck, Bridge Between BH-E07B & BH-SA AREA (WHJ, MM-07A, MM-G08B, BE- 07A, BH-07B AND BH-SA).
Project Accomplish - EPIC FOR AUTOMATION UPGRADE FOR NGL STORAGE AND LOADING FACILITIES
Client - Qatar Petroleum
Consultant – Fernas Construction Company Incorporated
Job Responsibility: -
Overall Plot Plan, Piping Layout Involved Butane, Gasoline, Naphtha, Propane Storage Tanks area & Butane, Gasoline, Naphtha, Propane Loading Arm in Jetty area.
Enoia Babcock Borosig Pvt Ltd (Future Pipe Group) Chennai.
Senior Piping Designer June 2015 to Nov 2019
Project Accomplish: CASSIA COMPRESSION PROJECT.
Client: McDermott Inc, USA.
Project Accomplish: LIWA Plastics Project
Client: CB&I CTCI- Oman.
Project Accomplish: P-0212 Lower Fars Heavy Oil Development
Client: Aquatech - UAE.
Project Accomplish: GATHERING CENTER -17,27&25.
Client: ARABI ENERTECH KSC
Job Responsibility:
Preparation/checking of piping layout, Isometrics, Shop floor drawings, Bill of material.
Stress Implementation updated Isometrics drawings and pipe support drawings.
Study and review of Piping Routing supports and its Feasibility.
Petro6 Engg and Construction Pvt. Ltd., Chennai
Senior Piping Designer Sep 2014 to May 2015
Project Accomplish: MADURA STRAIT BD FIELD DEVELOPMENT (FPSO - Offshore) KRAKEN FPSO - Offshore.
Client: HUSKY-CNOOC MADURA LTD - BUMIARMADA, Indonesia.
KRAKEN FPSO - BUMIARMADA, North Sea.
Job Responsibility:
Preparation of Piping Layouts based on P&ID, Plot plan, Equipment drawings involved area Well Head Plate Forms, Flare, KOD, Crude oil Separation, Condensate Stabilization Gas Recompression, Produced Water, Sour Water Striper, HP MP LP Separator, Stabilizer Column, Power Generation area.
Preparation of Nozzle orientation drawings for Co-ordination with client and interdisciplinary departments.
Review of Vendor Documents and drawings.
Arrangement of Pipe Rack Piping
Preparation/checking Piping Isometrics & BOM
Project Accomplish: SATELLITE OIL FIELD DEVELOPMENT PROJECT – Phase-2 (Onshore)
(SARASWATI, NI3, NI2, NE, WP1, WP14, GUDA Field)
Client: Cairn Energy India Pvt., Ltd (CEIL), India.
Job Responsibility:
Preparation & Checking of Piping Layout, Isometric and pipe support drawings.
Study and review of Piping Routing supports and its Feasibility.
Co-ordination with client and interdisciplinary departments.
Review of Vendor Documents and drawings.
Site visit to provide support for Client during Construction.
Project Accomplish: PROVISION OF DETAIL ENGINEERING SERVICES FOR MODIFICATION OF TR-1 & TR-2 CONDENSATE STABILIZATION SYSTEMS FOR YETAGUN PLATFORM (Offshore)
Client: Thai Nippon Steel Engineering & Construction Corp. Ltd.
Job Responsibility:
Involves study of existing piping tie-in lines, lines to be installed from tie-in to the newly installed Vapor KOD & Closed Drain system.
Preparation/checking of isometric drawing.
Preparation/checking of support Detail.
Project Accomplish: PROVISION OF DETAIL ENGINEERING SERVICES FOR FIRE WATER SYSTEM & FIRE FIGHTING SYSTEM FOR CRUDE OIL STORAGE TANK AREA (Onshore)
Client: Saipem India Ltd Client: ONGC Engineering Group India Ltd
Job Responsibility:
Preparation/checking of Piping Layout Isometrics and pipe support drawings.
Armstrong International Pvt. Ltd, Chennai / Piping Design Engineer / Oct 2011 to Sep 2014
Project Accomplish: PROVISION OF DETAIL ENGINEERING & RE ENGINEERING STEAM AND UTILITIES SYSTEM, CONDENSATE AND FLASH STEAM RECOVERY SYSTEM.
Client:
Condensate Recovery system for ENI S.P.A ROBASSOMERO – France.
Steam and Utilities system for Total carling petrochemical refinery – France.
Flash steam & Condensate Recovery system for Arikma jerry refinery – France.
Steam and Utilities system for IPLOM refinery – France.
Flash steam & Condensate Recovery for Reliance refinery – Jam Nagar India.
Job Responsibility: Involves study of existing piping tie-in lines, lines to be installed from tie-in to the newly installed Steam & Utilities system. Using Auto Desk Plant 3D Preparation & Checking of Piping Layout, Isometric and pipe support drawings based on P&ID, Equipment layouts, Equipment Data sheets, civil / structural drawings, piping material specification.
BGR Energy System Ltd. Chennai / Piping Designer / Dec 2010 to Oct 2011
Project Accomplish:
PROVISION OF DETAIL ENGINEERING SERVICES FOR TURBINE HOUSE CPU UNIT
2x660MW Power Generation Plant, Adani Power Ltd, M.H & R.J India.
1x500MW Power Generation Plant, Gujarat State Electricity co, Ltd, Ukai India.
Job Responsibility:
Preparation of Equipment Layouts based on P&ID, Plot plan, Equipment drawings.
Preparation of Isometric and pipe support drawings.
Extraction of Piping GADs drawings from Auto Desk Plant 3D
Extraction of Isometric shop fabrication drawings from Auto Desk Plant 3D
Extraction of Piping & Support Material Take-off from Auto Desk Plant 3D
Hindustan Dorr Oliver Ltd., Chennai / Piping Design Engineer / Sep 2007 to Oct 2010
Project Accomplish: PROVISION OF DETAIL ENGINEERING
Client:
1. Integrated Utility Treatment Plant for IISCO, Burnpur India.
2. Integrated Utility Treatment Plant for HPCL – Mittal energy Ltd, Bhatinda India.
3. Lime Handling System for Utkal Alumina Refinery International Ltd, Orissa India.
4. Utility Treatment Plant –IV for BPCL Refinery, Cochin India.
Job Responsibility:
Preparation of Equipment Layouts based on P&ID, Plot plan, Equipment drawings.
Preparation of Isometric and pipe support drawings.
Co-ordination with client and interdisciplinary departments.
Extraction of Piping GADs drawings from Auto Plant 3D
Extraction of Isometric shop fabrication drawings from Auto Plant 3D
Extraction of Piping & Support Material Take-off from Auto Plant 3D.
Personal Details:
Name : MURALI.R
Date of Birth : 14th May 1987
Marital Status : Married
Language Known : Tamil, English, Hindi
Nationality : Indian
Present Address : 5/3 Krishna Illam
Saiva Muthaiyah 1st Street,
Royapettah, Chennai - 600014.
Passport Number : T5945959-Type-P, Valid upto-08-05-2029
Employment Status : Full time
Date: R.MURALI