Engineer Mechanical
Resume:
Surender R. Kodur, P.E.
Houston Texas 77082
Email: add0a6@r.postjobfree.com
Phone 281-***-****
Education
MS, Mechanical Engineering
Tuskegee University, Alabama
BS, Mechanical Engineering
Tuskegee University, Alabama
Professional
Registrations and Affiliations
Professional Engineer, Texas No. 51722
Member of ASME
Career Profile
Engineering and design experience includes pipelines and compressor stations. Facilities experience includes subsea, petrochemical refining, pulp, offshore platforms and paper and gas processing. Building design and engineering includes site analysis, architectural, foundation, structural, MEP.
Key Skill
Structural Design & Analysis
Piping Design,Layout &Stress Analysis
Material Handling, Conveyor Layout Design & Analysis
Building Layout & Design
Mechanical, Electrical & Plumbing
Heating, Ventilation & Air Conditioning
PFD, PID
CFR 49, 192 and 195
Pressure Vessel Design & Analysis, ASME section VIII Div. 1 and 2
Oil and gas Facilities, Pipe Lines, Measurements, Proving, Gas compression & Oil pumping
Caesar II, PV Elite, Structural
software
Representative Experience
KODUR AND ASSOCIATES INC., Houston, TX 2015
Consultant
Deep Sea Technology, Houston, Texas County permits
Design of retail buildings including site development, foundation, structural, MEP
Milton Architects – Structural and MEP City and County permits
El Largo Enterprises Humble Texas– 21 Mobile homes and 1200 sq. ft. single family home- Structural, MEP and water, Sewer pump station, City and county permits
50 seat sit-down restaurant – Engineering services and permits.
2000 sq ft single family home- Design and engineering- Foundation, structural and MEP
3000 Sq.ft. single family home- Design and engineering- Foundation, Structural and MEP
WILLBROS/TRC SOLUTION COMPANY, Houston, TX 2014-2015
Senior principle engineer
EPCO - Hydrocarbon pumping facility
ANADARCO – 30” Gas pipeline and Facilities includes compressor stations and metering stations.
GULF INTERSTATE ENGINEERING COMPANY, Houston, TX 2010 -2014
Senior principle engineer
Pacific Gas and Electric co.
Pipe line feature build and evaluation and MAOP validation
Caspian Pipeline Consortium (CPC)
Crude oil pipeline and pumping stations, upgrading existing pump stations and adding new pump stations.
EPCO
100 MMSCFD Gas Compressor station
TransCanada
Oil Viscosity reduction test station.
Marathon Oil co.
Condensate pipeline and pumping stations.
ANR east
Gas pipeline and Compressor Stations 10% estimate site layouts FERC filing
Colombia Gas Pipeline
7 new Compressor stations and existing compressor stations upgrade 10% estimate.
URS, INC., Houston, TX 2004-2010
Lead Mechanical Engineer
Engineering, Procurement & Construction, Albemarle, Houston, TX
Was responsible for mechanical, piping and ducting, equipment packages for a new catalyst plant installed within an existing facility.
Pollution Control Upgrade, Dewatering Systems, Seminole Electric Cooperative Inc., Palatka, Florida
Prepared mechanical packages including the belt dryer, conveyors and mechanical buildings for the dewatering portion of this power plant FGD upgrade project.
FGD Modifications Project, NRG Limestone Electric Generating Station, Jewett, Texas
Designed the new dewatering system for this flue gas desulfurization project
Tail Gas Cleanup Unit, Imperial Oil, Canada
Designed desulfurization of the tail gas and performed pipe stress analysis using Caesar II computer program for a 200 Mil per day gas processing plant.
Erath Gas compression station, Atmos energy co. Dallas, TX
Tri-city Gas Compression Station, Atmos energy co. Dallas, TX
Project Engineer
Eagle Rock Energy, Amarillo, TX
Designed the addition of a new compressor station and new pipeline for a gas gathering station.
FMC ENERGY SYSTEMS COMPANY, Houston, TX 2000-2003
Contract Engineer
Designed sub-sea manifolds, jumpers, mud mats and PLETS. Manifold includes structural skid, piping and controls and its support structure. Extensive FEA is used for the design of structure and piping.
British Petroleum – Thunder Horse Project
British Petroleum – Atlantis Project
ExxonMobil
TGS ENGINEERING & CONVEYING COMPANY, Houston, TX 2000-2003
Project Engineer/Manager
Responsible for the coke conveying systems consisting of crushers, feeders, stacker and transfer conveyors.
Phillips/Sweeny Coker Project, Sweeny, Texas
ExxonMobil Coker Project, Baytown, Texas
Clark Refinery Coker Project, Port Arthur, Texas
MERICHEM COMPANY, Houston, TX 1996-1999
Lead Mechanical Engineer
Responsible for the design skid mounted system to treat hydrocarbon streams. The system includes structural base, separators, pumps, heat exchangers, piping, controls and electrical.
Sizing of separator vessel, pumps, heat exchangers and control instruments like control and relief valves
Coker project Phillips Refinery, Sweeny, Texas
Ecopetrol refinery, Colombia
ADNOC, Saudi Arabia
Motiva Refinery, Port Arthur, Texas
EXCEL ENGINEERING INC., Houston, TX 1994-1996
Senior Engineer
Responsible for facility design for offshore platform, analysis and design of skid mounted equipment for offshore and onshore projects.
Vermillion Block 228, Meridian Oil Company
Albacora Field FPSO, Petrobras, FMC Corp.
Oil Production Facilities, CMS NOMECO International Inc.
SHELL RESEARCH & DEVELOPMENT COMPANY, Houston, TX 1993-1994
Contract Engineer
Responsible for design of reactors and their support structure, piping and instrumentation for Elastomer project.
GH FLOW AUTOMATION INC., Houston, TX 1984-1988
Engineer
Responsible for developing P&ID’s, process calculations and designs of skid mounted liquid and gas metering systems. Control valve and relief valve sizing.
Gas Metering Skid for Westlake Pipe Line Co.
Gas Metering Skids of various sizes for Tenneco Gas Co.
Midwest Gas Storage Gas Metering Skid for Panhandle Eastern Co.
REDDY ENGINEERS & CONTRACTORS INC. 1986-1993
Project Manager
Responsible for project management includes estimation, proposals, and procurement for material, contract negotiations and sub-contract awards.
1.2 Million gallon Wastewater treatment plant for WCI&D No.1 Highland, TX
Million-gallon Wastewater treatment plant at BETO for TDC, TX
Dust System for Bulk Material Handling Plant, Port of Houston Authority, Houston, TX
J.E. SIRRINE COMPANY, Houston, TX 1979-1984
Project Engineer
Responsible for process and mechanical design of a complete wood, chip, bark and coal handling system. Scope includes storage silos, extensive conveying system of belt, chain and screw conveyors. Debarking drum, chipper, mechanical screens, pumps and log flumes.
Pulp and Paper plant for Weyenhaeuser
Pulp and Paper plant for Crown Zellabach
Coal handling system for Eastman Kodak Co.
Contact this candidate