Joseph G. Facelli Home: 901-***-****, Mobile: 901-***-****

**** ***** ****** ****, *******, TN 38119 e-mail: adczx7@r.postjobfree.com Professional Profile

EDUCATION:

B.S. in Electrical Engineering, University of Tennessee, Knoxville. EXPERIENCE:

November 2012 – December 2019 (Reduction in force, Supervisor’s recommendation available.)

Senior Design, Maintenance and Manufacturing Engineer. View, Inc. Olive Branch, Mississippi. Maintenance and Manufacturing Engineer for the production of electro chromatic architectural glass including conveyor systems, Allen-Bradley and Siemens PLC, HMI, Variable Frequency Drive programming, power distribution and design. UL508A electrical control panel design. Supervisor’s recommendation available. June 2012 – October 2012 (Contract Employment)

Senior Project Engineer. NKC of America, Inc. Memphis, Tennessee. Senior Project Engineer for the design, installation and startup of automotive conveyor systems including Allen-Bradley PLC, HMI, Variable Frequency Drive programming, power distribution and design with AutoCAD 13. Supervised projects of total estimated costs in excess of $8,000,000.

May 1999 – September 2011

Manufacturing, Maintenance, Facilities Engineer, Department Quality Engineer and acting Supervisor.

Carrier Corporation, Division of United Technologies, Inc. Collierville, Tennessee. Manufacturing/Maintenance/Facilities engineer and acting supervisor in support of the manufacturing of residential air conditioners. Completed electrical and instrumentation design, installation, maintenance, down-time studies, cost estimating, NEC code requirements, construction support and start-up for Allen-Bradley and Siemens PLC’s, HMI’s, Adept robots, motor drive systems and LAN’s for assembly line conveyors, coil formers, 500 ton presses, paint lines, waste water and rolled steel cutting lines. Also, Supervised electricians, mechanics and oilers for installation, maintenance and operation of assembly line conveyor systems, Allen-Bradley PLC’s, photo-eyes, proximity switches, motor drives and solenoids. Completed plant Maintenance Planning with MP2 software. Managed and maintained electrical distribution systems (23kV/12,470V/480V) with a Square ‘D’ Power Logic System, plant Fire Protection systems (Simplex-Grinnell and Security Fire sprinkler systems), Security systems (UTC Facility Commander access control and video DVR systems), 275 kW Emergency Generator and IS UPS systems. Managed and maintained Commercial HVAC systems (Carrier Comfort Network), 600, 700 and 900 h.p. air compressors, all door lock and dock door maintenance and pest control for the plant. Managed and maintained plumbing and janitorial services for the plant. Supervised projects of total estimated costs in excess of $8,000,000. Produced Continuous Process Improvement (Achieving Competitive Excellence Quality Program, similar to Six Sigma) in conjunction with Value Stream Maps (VSM), Relentless Joseph G. Facelli 901-***-**** e-mail: adczx7@r.postjobfree.com Page 2 of 4

Root Cause equipment analysis, turnback and escape reduction, Customer Feedback with Quality Control Process Charts QCPC in conjunction with ODBC, SQL and RSSQL, OIG’s

(Operator Instruction Guides) and Kaizen events for Assembly and plant Facilities. February 1998 - May 1999

Electrical Project Engineer.

Electronic Systems Inc. (ESI). Memphis,Tennessee.

Managed and designed electrical, electronic and instrumentation design, cost estimating, code requirements, construction support and start-up for PLC’s, LAN’s, HVAC, intercom, fire alarms, telecommunications, touch-screen, CCTV control systems and fiber optic cabling for various facilities. Supervised design for projects of total estimated costs in excess of $5,000,000. All drawings were produced with AutoCAD. Completed a course on Omron PLC programming and maintenance.

April 1996 - September 1997

Electrical and Instrumentation Project Engineer.

Borton Engineering, Inc., Memphis, Tennessee.

Managed electrical and instrumentation conceptual design and cost estimate of a

$50,000,000 recycled liner board paper plant. Supervised final electrical and industrial automation of a vegetable oil plant including Allen-Bradley PLC I/O layout. Completed and supervised designs for a polymer chemical plant, a wheat gluten plant, bulk material and conveyor system electrical, instrumentation and industrial automation projects including P&ID drawings. All electrical and instrumentation design was produced with AutoCAD. February 1989 - October 1995

Engineer II. Dover Elevator Systems, Inc., Memphis, Tennessee. Design, manufacturing and application engineer (i.e., product engineer) for IDEC PLC's, AC and DC motors and drive systems in the elevator division of a Fortune 300 company. Responsible for the design and application of electrical SCR, variable frequency and variable voltage motor drives, control systems, motor starters and AC and DC motors for both hydraulic and traction elevator systems. Also, responsible for National Electrical Code, Underwriters Laboratories, Canadian Standards Association and National Electrical Manufacturers Association (NEMA) Code application and interpretation for electric motors. Programmed IDEC PLC's for control of elevator functions. Worked with manufacturing to incorporate modifications and improvements to existing motor drives, control systems, motor starters and AC and DC motors. Performed complete theoretical analysis and field testing of the above elevator electrical system components. Produced complete specifications for an electronic motor starter, DC motors and motor-generator sets. Improved existing AC and DC motor application and design by analyzing elevator system variables and modifying equipment specifications. Analyzed and defined elevator system performance (e.g., elevator duty, flight times, NEC hazardous areas and heat release) for Corporate application policies and procedures.

Completed courses on the Application and Control of Electric Motors; Variable Voltage, Variable Frequency Drives, SCR Drives Adjustment and Control and Electrical Harmonic Analysis and Correction.

Joseph G. Facelli 901-***-**** e-mail: adczx7@r.postjobfree.com Page 3 of 4

August 1987 - February 1989

Engineer IV. Barge, Waggoner, Sumner & Cannon, Inc., Memphis, Tennessee. Primary electrical and instrumentation design engineer for consulting firms branch office. Main clients included Kellogg, Inc. and du Pont, Inc., located in Memphis, Tennessee. 480-120V power distribution and low voltage (i.e., instrumentation) control system design: Designed wiring diagrams, power plans, elementary diagrams, control panel layouts, lighting plans, power panel, loop diagrams, P&ID diagrams, UPS system and conduit schedules for the clients listed above on various projects. Electrical design emphasized Allen-Bradley, Texas Instruments and Fisher Provox DCS programmable controller installation and control wiring design on the following projects: a water softener, a Statox gas monitoring system, food product process flow modification, 250 H.P. AC variable speed drive system, water treatment facility and a food product conveyor system. Utilized personal computer hardware and software, including Intergraph CAD, in the design of the above projects.

February 1987 - July 1987

Associate Engineer. Allen & Hoshall, Inc., Memphis, Tennessee. Electrical design engineer. Responsible for the design of 480-120V power distribution and lighting systems for water treatment plants, propane distribution plants and an alcohol processing facility. High voltage riser and transformer distribution was also designed. June 1980 - February 1987

Engineer II. Lockheed-Martin, Inc., Oak Ridge, Tennessee. Y-12 Plant. Electrical design engineer. Responsible for the design of electrical support facilities for the Y-12 Plant. Design experience includes: 480-120V power distribution and control systems design: Produced elementary diagrams, wiring diagrams, power plans, control panel layouts, power panel and conduit schedules to provide electrical service and control to a furnace door refurbishment, specialized machining hoods, an adhesive spray facility, laboratories, a 72 inch vertical turret lathe controls retrofit, a non-hazardous nuclear safe coolant system and a mold process hood with criticality safe interlocks.

Architectural engineering design: Lighting calculations, load calculations, grounding, emergency egress lighting plans, public address system one line diagrams and plans, HVAC electrical service and control for office building design. Contractual responsibilities: Prepared conceptual design reports, cost estimates, manpower estimates and technical details for contractual work. Electrical project experience: Supervised electrical design for projects of total estimated costs in excess of $5,000,000.

Worked with maintenance, construction and operating personnel during initial testing and operation of the above projects.

Computer integrated manufacturing (CIM) systems project experience: Managed a software project team that produced an integrated tooling management system to account Joseph G. Facelli 901-***-**** e-mail: adczx7@r.postjobfree.com Page 4 of 4

for approximately 120,000 pieces of tooling at the Y-12 plant. Management consisted of coordinating team activity through the definition, design, implementation, maintenance and review phases of the system development. Personal computer hardware and software was extensively utilized as a management tool and for presentation graphics. September 1978 - May 1980

Junior Engineer. Georgia Power Company, Atlanta, Georgia. Created a method of optimum conductor and transformer selection based on computer assisted economic analysis. Designed 115kV single wood pole and wood H-frame transmission lines.

CLEARANCES: "Q" Security Clearance.

POST GRADUATE COURSES COMPLETED:

Electric Power System Protection

Application and Control of Electric Motors

Variable Voltage, Variable Frequency Drives, SCR

Drives Adjustment and Control

Electrical Harmonic Analysis and Correction

Eaton Power Systems Software and Communications

COMPUTER SOFTWARE/HARDWARE EXPERIENCE:

Siemens Step 7 PLC

Allen-Bradley ControlLogix L73, Micrologix 1100, PLC-5, SLC 500, HMI RSLogix 5000, FactoryTalk View Machine and Site Edition Series 40 and 70 VFD’s

UL508A Certification

Omron PLC Programming and Maintenance

AutoCAD 2013 with Electrical Package

E-Plan P8

Square ‘D’ Power Logic

Facility Commander Access Control System

UTC/GE DVmre Pro Video DVR System

Carrier Comfort Network for commercial HVAC systems MP2 (Maintenance Planner)

Intergraph

Microsoft Office, Visio and Project Manager

REFERENCES: Available upon request.

Smoking status: Non-smoker

Contact this candidate