S.Muruganandham

adcynd@r.postjobfree.com

Contact No: 82441765

Objective: To work on dedicating with experiences and knowledge to achieve the goal, maintain it and to perform good attitude in QA/QC inspector roles. I am looking for the job to take it as challenge.

Total years working experience: 16 Years.

Position: QA Engineer –Piping.

Keppel Shipyard Ltd. Singapore. (03/06/2019 to 10/04/2020)

Owner: GOLOR GIMI, BP.

Code: Clint specification, ASME 31.3, DNVGL.

Responsibilities:

Review ISO drawing, P&ID, Client specification, code, Project Procedure, ITP, Test pack.

Inspection of piping Material, mill certificate, Material verification report –MVR as per client specification and code requirement

To perform inspection pipe fit up, visual weld joint, dimension & tolerance as per drawing Client spec. and owner code.

Preparation RFI to owner inspection. Verify the inspection report

Final inspection of pipe welded with owner as per drawing, specification, code.

Coordinate for Ndt, review the NDT report

Line walk inspection for pipe line as per ISO drawing, P&ID in test pack & punch list preparation.

Inspection flushing, Hydro testing, Pneumatic testing as per the test pack, specification and verify the report

Inspection Reinstatement as per the drawing limit in test pack, Prepare documentation.

Position: QC welding inspector-Piping.

SembCorp Marine Offshore Platforms Pte Ltd. Singapore. (01/02/2017 to 31/05/2019)

1) Project: Culzean filed development projects. - Offshore platform –1) Well Head, 2) Central processing Flare 3) Gas compressor Module, 4) ULQ

Client: Maersk Oil. CODE: Norsok Standard.

Classification: DNV GL.

2) Project: Johan Castberg FPSO Module Structural.

Materials:-

Super Duplex SS

6Mo

SS 316L

LTCS

Ti

UNS S32760, S32750

UNS S31254

UNS31603

A333 GR6

ASTM B862

Responsibilities:

Review Shop/Assembly drawing, code, specification, ITP, Quality procedure, Test pack.

Review drawing, P&ID, ISO drawing. Procedure, Client specification, code.

Review PQR, WPS, WQT certificate, welder ID as per the client project

requirement.

To perform visual inspection for material, fit up, final pipe welded, dimensional

Check as per drawing, code, client specification.

Witness NDT, Ferrite test, PMI, Hardness test, PWHT as per client’s specification.

Monitoring welding parameters, welder performance and consumable control

As per Procedure, specification and code.

Visual inspection for final welding, borescope inspection to internal pipe,

Dimensional / tolerance for pipe spool length, slope of pipe as per drawing

Specification and code.

Inspection/witnessing for line walk, reinstatement, Prepare punch list

Open/close.

Inspection of flushing, pickling passivation, Hydro testing, Pneumatic

Testing, chemical cleaning, hot oil flushing.

Inspection/Monitor testing of chemical cleaning pickling, neutralization,

Passivation, neutralization. Hot oil flushing as per code, Test package, client

Specification.

Position: Certified welding Inspector CWI.

Surbana Jurong Private Limited. Singapore April 2015 to July 2016

Projects: Mount Faber pipe laying PUB.

Owner: PUB Government Corporation, Projects Mount Faber &C7.

Pipe material

Dia: 700 &1200 & 2200 mm

CS S275JR

Code

AWS D 1.1, PUB Specification.

Responsibility:

Review drawing, code, specification, project procedure, PQR, WPS, WQTR,

welder pass.

Client Inspection for material, fit up, during welding, final visual inspection.

Witness for Ndt, Hydro testing. Chemical cleaning, PH value.

Inspection for Insulation electrical resistance testing

Inspection/Witness for CCTV video footage.

Prepare record for daily activities to reporting to RE/SO.

Witness for civil work every day final settlement.

Review documents of WPS, WQTR,inspection and testing reports from

contractor and subcontractor works.

Review/approve contractor welding fit up, final visual inspection, NDT testing

and hydro testing repots.

Position: QA /QC Inspector (Shop/Site)

Rotary Engineering Limited. Singapore, Jurong island.Dec.2012 to Mar. 2015

Project: Me5, C3 metering skid piping, Maintenance.

Owner – Evonik. Chevron for Terminal projects pipe rack and pipe.

Code: ASME –IX, ASME B 31.3,

Pipe material

SS - 304/304L, 316/316L, 316Ti, 904L,316 Ti,Al,317L,321L, Titanium, Al

CS –A 106 Gr B,A333 & Alloy -16Mo3

Structural Material

S235 JN,JR,J0,S275J0,JR,S355 JR,J0

Responsibility:

To review/preparation of Quality plan, ITP, check list, testing procedure, test

Package.

Review AFC drawing of Isometric, P&ID, PFD drawing and bill of materials.

Review Piping specifications/codes,ITP, check list

Inspection of material as per projects spec/drawing, witness material charpy

impact test, tensile test.

Monitor/witness the welding consumables controls/records by heating

procedure, issue/receive. Review reports daily process control.

Controlling workshop fabrication and site work activities of use of materials, wps,

welder qualification/performance, and consumables as per AFC drawing,

Specification/codes.

Conduct, inspection WPQR / destructive bent, tensile, charpy. Macro test, PWHT,

preparation of WPS, WQT for client approval, and welder mock up test as per code.

Conduct final visual inspection, Punch list, coordinate Ndt & Film interpretation.

PMI, Ferrite test as per client spec. code ASME 31.3 .ASME SEC V .9

Rise up RFI to client final visual inspection, hydro testing Monitoring welding

process during the welder doing as per the WPS and welder performance as per code

/company requirement.

Witness/review NDT, PMI & Ferrite testing, review procedure and reports.

Documents preparation is Welding log sheet, fit up & visual inspection report, welder

performance record.

Monitoring preheat, Interpass temperature and PWHT as per WPS.

Test pack preparation and witnessing hydro test, air blow & N2 gas test.

Maintain all the reports and records with authorization approval and hand over the

documents in proper channel.

Project: Rehabilitation of floating roof Tank

Position: Lead QA/QC Supervisor

Owner: ExxonMobil Asia Pacific Pte ltd.

Code: API650, API 653.

Document preparations are quality plan, testing procedure, ITP, test package

Inspect/prepare document of welding procedure qualification record (WPQR), WPS

preparation for 516 GR70, A106 Gr B. ABS Gr A, 283 Gr C and Cortan steel pipe.

Inspect/prepare document of Welder qualification test for the PRiMOS and ASME

Sec IX.

Inspect /Prepare document of bottom plate, annular plate, shell and pontoon

fabrication welding inspection log sheet, dimensional and diagonal control report,

nozzle dimension checking report.

Inspect / controlling welding consumable control procedure, monitoring storage.

Inspect/witness the Ndt inspection.

Review with prepare quality plan, ITP, WPS, PQR, WQT, approved NDT procedures,

review approved specification procedures relevant to codes and standards.

Position: Asst. QA/QC Engineer – Piping & Structural

Nakilat-Keppel Offshore And Marine Ltd. Qatar March 2010 to march 2012.

Asst.Engineer: Machine shop

Projects: A. Dry Dock gate 1&2 B. Load out/ Recovery Barge

Repair ships. A) LPG, LNG ships.

Code: IACS, DNV, LR, ABS shipbuilding and repair standards.

ASME 31.3, AWS D1.1. ASME SEC..

Responsibilities:

Prepare ITP, test package, inspection schedule RFI, reports liaise with class and

client representative.

Review AFC, ISO, shop fabrication drawing and site assembly drawing for

dimensions, weld geometry, weld symbols, joint members, alignment, welding

process and specification.

Inspect Consumables controlling process, storage and essential variables trade,

prepare report for electrode, and filler wire inspection with batch no., brands, and

oven calibration certificates. And inspect/witness the consumables issue and

return records. Check quiver temperature control, welding m/c calibration.

Responsibility for material inspection to detect surface defects, lamination and

Thickness by UT test, heat number, plate number, plate thick, project color code.

Inspect, testing/prepare documents, MRIR.

Preparation/Monitoring and review WPS, WQT, WPQR test report and verify mill

Certificate. Review material certificate for chemical composition, tensile, yield

strength, heat number, Impact ‘V’ notch. Class of approval.

Welding inspection for the panel, panel assembly, block assembly and erection as per Drawing, specification, codes, standards and limits.

Responsibility for final visual inspection for structural and pipe welding to evaluate imperfections and marking defects as specification and class codes.

To follow inspection procedures as per approved ITP check points. For preparation of RFI (request for final class inspection or owner representatives) by using QRM (Quality record management) or MS office.

Responsibility to monitor welding preparation, welding process and welder

certificate according to the WPS. Monitoring preheat, Interpass temperature and

PWHT as per WPS, WPQR.

To prepare punch list, NCR to meet the standard quality requirements.

Monitoring welding process and welder performance as per wps. Controlling welding consumables as WPS for consumable temperature control process before and after welding.

Monitor interprets RT, UT, and MT & PT test results. Review. Monitor the repair

weld process, inspect repair weldment and test reports.

Prepare documents and witness the final inspection report, maintain control

records of consumables, welder qualification and inspection test report.

Witness the Hydro test, vacuum test and air test .prepare and prepare

documents/witness the report.

Review NDT test report, Dimensional Control report after the panel, block

assembly, and comportment close out.

Position: QC Engineer structural /piping

MLT &KOASTAL MARINE ENGG LTD, Singapore Nov.2007 to Nov. 2008

CASPIAN SHIPYARD CO LTD, Azerbaijan.

Projects: 1.Arahura cruise 2. Alaska cruise 3. Jascon25. 4. Jascon29 5.Sunrise 6.

BUE UH-108,109 barges

Position: QC Engineer

A.G.E.S.Automotive (p) Ltd, Chennai, India. November 2004 to October 2007.

Job profile: welding inspection for exterior and interior steel body frames and

Design for engine parts.

Position: QC Engineer

DRIESCHER PANICKKER LTD

Duration: March 2003 to October 2004.

For welding of control panel, electrical tower fabrication.

ACADEMIC QUALIFICATIONS:

Bachelor of engineering in Mechanical. - 2002.

Barathidasan University, Trichy, Tamilnadu.

College of AAMEC - Thanjavur

Certification: CSWIP 3.1-No: 66354/2 –validity to 25-06-2022.

NDT: Level II - UT, RI, VT, MPI, PT. Validity to 07-2021

Computer knowledge & skill: Diploma in MS office, AutoCAD 2D, 3D.

PERSONAL DATA

Name : S.Muruganandham

Date of Birth :12/07/1980

Nationality :Indian

Race :Indian

Gender :Male

Marital Status :Married

Pass port :R8165215

Pass type :S pass

Fin no : G7579830Q

Basic salary : S$3100.

Expected Salary: S$ 3300.

Date Availability: 1month

Contact this candidate