Christopher A. Lanning
Kannapolis, NC 28083
adcxe3@r.postjobfree.com
Work History
1.Carl Zeiss Industrial Metrology
**** ********* *****, ******* ** 28027
Job Title – Applications Engineer
Responsibilities
Write CMM programs for Aerospace, Automotive, and Medical companies. On-site evaluation of CMM lab standards. Training of Basic, Advanced, and GD&T classes. Measure FAI, and production parts.
2.KBRWYLE 5-1-2017 to 4-8-19
400 S. Buncombe Rd. Greer, sc 29650
Job Title – Senior CMM Programmer
Responsibilities:
Provide on-site support for Honeywell Aerospace. Develop CMM programs for new products using Calypso Software. Maintain 6 CMM’s within the facility. Develop auto-run programs for blades, nozzle segments, and disks. Develop programs for Gage calibration.
3.Grupo Antolin 4-8-16 to 4-25-17
304 John Martin Rd.
Job Title – Lab Manager
Responsibilities:
Annual Validation of Parts, Gage Calibration, Capability studies, Gage R&R, Creation of Test procedures, and Work instructions. CMM measurements using Romer Scanner, and Hexagon Cognitive White light system. Prepare for TS and ISO audits, as well as customer requested audits. Collect and validate SPC data. Assist engineering with launch of new products. Train lab tech’s on all equipment like Microscope, Isoscope, moisture analyzer, Gloss meter, Color meter, Instron tensile tester. Arrange for 3rd party analysis such as Peel adhesion, and flammability.
4.Performance Automation From 11-01-15 to 4-1-16
Simpsonville SC
Job Title – CNC Programmer (Part Time)
Create CNC programs with MasterCam X5 for Haas VF4 CNC Mill. Set up and operate Haas VF4 CNC Mill. Machine parts from blueprints, some from CAD. Materials from Plastic, Delrin, Aluminum, Stainless steel, Tool Steel, and Cold Roll Steel.
5.ZF Transmission From 11-3-14 to 4-1-16
Gray Court, SC
Job Title – Initial Series Release Inspector 2nd Shift Level 3 Metrologist
Responsibilities:
Determine if production is ready to produce parts from Initial Series Release Samples and Data.
Machines required for inspection.
Optical Comparator, Mahr Contracer, MahrSurf, Height Gage, Zeiss CMM operating Calypso Software.
Interpret Data collected from Metallurgy, Klingenburg Gear CMM, Hummell, and Jenoptik.
6.Asco Emerson Power Technologies From 10-10-10 to 10-23-14
325 Welcome Center Blvd. Welcome, NC 27374
Job Title – Senior Quality Technician (Lab Manager)
Responsibilities:
All First Article inspections. Program and operate Mitutoyo Bright CMM using MCOSMOS, and Romer Arm Infinite operating Power Inspect 2013. With every CMM program I create an operator set up for the inspectors.
Train all new inspectors in the following areas:
Blue Print Interpretation
Manufacturing tolerances
Proper method of using 6” Calipers, 0-1” Micrometer, Protractor, Square, Height Gage, Optical Comparator, Plating X-Ray machine, Rockwell Hardness Test, Surface Finish, Radius Gages, and the Chamfer Gage.
Responsible for Reverse Engineering of molded parts, by exporting Iges components to the engineering group.
Supervise the daily incoming inspection of material.
7.Phoenix Precision Machine From 1-10-06 To 12-13-08
112 School Rd.
Trinity, NC 27370
Job Title – CNC Machinist
Responsibilities:
Set up and operate Fanuc controlled CNC milling machines. 4th and 5th Axis.
Set up all tools, Center drills, drills, taps, end mills, reamers, etc.
Qualify 1st piece using Optical Comparator, or CMM.
Record log of recorded measurements throughout the machining process.
Program, set up and operate Hurco Mill.
Conversational programming at machine computer.
In process operation of CNC’s trim time off of cycle by adjusting clearances, speed and feeds, until the program is proven.
Manufacture Prototypes,
Manual Mill and Lathe Work.
8.H&R Mullis Machine From 3-6-02 To 4-29-05
151 Highway 24 27 E
Midland, NC, 28107-6420
Job Title – CNC Machinist
Responsibilities:
Set up and Operate CNC milling machines Horizontal and Vertical. With pallet changer.
Honing of hardened sleeves to tight tolerance using bore gage.
Surface grinding of hardened materials such as A2, D2, and M2.
Manual lathe and Bridgeport work
Unloading materials truck using overhead crane.
Setting up automatic band saw to cut materials for CNC work
9.Lane Punch Inc. From 2-10-91 To 1-20-94
281 Lane Parkway
Salisbury, NC 28146-9745
Job Title – Precision Form Grinder
Responsibilities
Surface and Form grind hardened tool steel punches and dies to close tolerances.
Grinding of hardened tool steel to tolerances of 0002.
Grinding shapes such as oval, square and rectangle.
References –
1.Ron Mullis Shop Owner H&R Mullis Machine 704-***-****
2. Kyle Lanning Father and Certified Machinist 336-***-****
3. Joey Chambers Shop Supervisor Phoenix Precision Machine adcxe3@r.postjobfree.com
4.David Pruitt Design Engineer at Emerson 1-336-***-****
Certifications:
CMM Software
MCOSMOS 3 Day On-site Training
MCAT 4 Day training at Mitutoyo Training center
Powerinspect 3 Day On-site Training
Calypso 5 Day training at Ellison Technologies
Calypso Advanced CMM programming. 5 Day course at Zeiss Facility.
Calypso Curve and Free Form
Calypso PCM
Calypso Piweb
Calypso GD&T
Polyworks 5 Day training at Innovmetric Inc.
Coreview 5 Day training at Hexagon Inc.
Office and Quality Tools
Microsoft Office 2013
SAP
Trackwise
Minitab
Gagetrak 3 Day Course
Measurelink
QC Calc
CNC Software
Mastercam
Manufacturing Related
Advanced GD&T – 2 Day course at Piedmont Tech
SPC 3 Day Course at Piedmont Tech.
Gear Technology ZF Transmissions