STEPHEN G. PROSSER
CADD TECHNICIAN/DESIGNER
General Qualifications
30+ years experience in Civil Design Engineering. Experienced in various development and design documentation including but not limited to construction development, designing landscape and utility documents. Organized, dedicated and highly motivated to provide clear and concise documentation.
Experience
06/13/2019 – 03/24/2020 KCW Engineering Tech
810 Landmark Drive, #215
Glen Bernie, Maryland 21061
CADD Technician / Sr. Designer
Drafting in CADD and designing Transportation Details and Plans. My work entails, creating TCP Traffic Control Plans for Pepco and Verizon for Underground Conduits and Overhead Utility Poles for Washington DC
09/29/2016 – 04/17/2019 Daniel Consultants Inc.
8950 Old Annapolis Road/Route 108 East Suite 229
Columbia, Maryland 21045
CADD Technician / Sr. Designer
•Drafting in CADD and designing Transportation Details and Plans. My work load is Light Rail to Transportation - Highway and Road Construction.
•Fieldwork on other projects like GPS Data Collection and HOV vehicle counts
•QA/QC Revisions and Questions on Bluebeam Vu 2016
•Creating Existing and Proposed SHA Traffic, Private and Street Signs in Guid-Sign 6/microstation
•Produced site development construction documents, designing landscape and utility documents.
•Both graphics and mapping products.
Participated in data capture and aerial mapping.
•Project Examples:
•Purple Line – Transit Partner – DC/Maryland
•Northern Pkwy @ N. Charles St. – City of Baltimore
02/25/2013 – 05/06/2016 Prime AE Group
5221 Research Park Drive Suite 300
Catonsville, Maryland 21228
CADD Technician / Designer
•Drafting in CADD and designing Structural Details and Plans. Just finished my stint at Parsons (downtown Baltimore city) as a Contractor on a big Light Rail job. I'm back at Prime AE Group again and in a new location, the new office is on UMBC Campus in Catonsville. My work load is Structural - Bridges and Light Rail to Transportation - Highway and Road Construction.
•Produced site development construction documents, designing landscape and utility documents.
•Both graphics and mapping products.
Participated in data capture and aerial mapping.
•Project Examples:
•Md. Rte. 210/Kerby Hill Rd. Noise Barrier Wall Design
•Retaining Wall Design – Fore River DB
•I-71 Trench Retaining Wall
•Bridge and Rebar Design – St. Croix
•Md. I-695 Southwest Noisewall and Retaining Wall Design
•Anacostia Mainline, Ramp 4 & 6, DcDOT Bridges- Retaining Walls, Abutments etc.
03/15/2012 – 02/22/2013 Phoenix Engineering Inc.
309 International Circle, suite 130
Hunt Valley, Maryland 21030
CADD Technician / Designer
•Produced site development construction documents, designing landscape and utility documents.
•Both graphics and mapping products. Produced site development construction documents, designing landscape and utility documents.
•Project Examples:
•Md. Rte. 22/Rte. 462 Noise Barrier Wall Design
•East Baltimore Development Industry – Baltimore City, Md.
•Shady Grove Tank Removal and Bio-Retention
•Gun Powder Force Main Structure
03/21/2011 – 09/02/2011 Parsons Engineering
10010 Junction Drive, suite 100
Annapolis Junction, Maryland 20701
Sr. Civil Designer
•HPCC-2 Development Department performing drafting and design tasks on FOUO (For Official Use Only) projects for our client MPO (Government Classified Name).
•Produced site development construction documents, designing landscape and utility documents.
•Both graphics and mapping products. Participated in data capture and aerial mapping.
•Participated in data capture and aerial mapping.
01/30/2011 – 03/20/2011 Datta Consultants Inc.
711 West 40th Street, suite 355
Baltimore, Maryland 21211
CADD / GIS Technician
•Worked in the GIS Development Department performing drafting, GIS and some design tasks as a Contractor for KCI Engineering from Sparks, Maryland.
•Produced utility construction and GIS documents.
•Both graphics and mapping products.
•Participated in data capture and populating databases for GIS-related projects.
•Project example:
•GIS Utility Design, - Entire City of Baltimore, Maryland
11/19/2005 – 05/04/2010 STV Incorporated Inc.
7125 Ambassador Road, suite 200
Baltimore, Maryland 21201
CADD Technician / Designer
•Worked in the CADD/Land Development Department performing drafting and some design tasks.
•Produced site development construction documents and Condominium documents.
•Both graphics and mapping products.
•Participated in data capture and populating databases for GIS-related projects.
•Project Examples:
•Pier Homes at Harborview Condominiums, - Baltimore City, Maryland
•Excalibur at Avalon Condominiums, - Baltimore, Maryland
•Orchard Ridge (Claremont Village) - Baltimore City, Maryland
•1901 South Charles Street – Baltimore City, Maryland
•East Baltimore Development Industry – Baltimore City, Md.
•UMB Bio-Park – Baltimore City, Maryland
•Stadium Place, Greenhouse – Baltimore City, Maryland
•Wastewater Treatment Plant – Fort Detrick, Maryland
•Patterson Park Ave./ N. Gay St. Parking Lot – Baltimore City, Maryland
•Uplands Redevelopment – Baltimore, Maryland
•Lowes Hardware / Wal-mart W. 25th Street – Baltimore City, Maryland
•UMBC Research Park – Baltimore County, Maryland
•Fort Story Shooting Range – Virginia Beach, Virginia
09/2001 – 11/2005 DMJM+HARRIS, AECOM
7 Saint Paul Street
Baltimore, MD. 21201
CADD Technician
•Worked in the CADD Transportation/Rail Department performing drafting and design tasks.
•Diverse experience in Virginia, Washington D.C. and Maryland State standards for the following products:
•Subway and Light Rail Design
•Highway construction
•Master planning and some site development plans
•Both graphics and mapping in Auto Cad Revision 2002 and Micro Station Revision J.
•Participated in the following projects:
•WMATA - Washington D.C. - Core Capacity Study
•Harrington, Delaware DelDOT
•Woodrow Wilson Bridge
•LRT District Planning
•Baltimore Washington International Airport – BWI 15R Triturator
10/1999 – 09/2001 DCI, Daniel Consultants Inc.
8950 State Route 108
Columbia, MD. 21045
CADD Transportation Manager
/ CADD Designer -
•Mr. Prosser worked in the CADD Transportation Department performing drafting and design tasks. His experience was diverse in Virginia and Maryland State standards for the following products: Highway construction, master planning and some site development plans – both graphics and mapping in AutoCad and MicroStation. He also participated in manual traffic counts and Traffic signal design. Some of the largest projects Mr. Prosser participated in include:
•Baltimore Washington International Airport : M.O.T.= Maintenances Of Traffic
•Virginia Dept. of Transportation – Misc. Traffic Light and Road Designs
•Va. Rt. 234 and Misc. Intersections
•Va. Rt. 340 : M.O.T., Road, Right-of-Way and Drainage
Plans
•Maryland Dept. of Transportation – Md. Rt. 117 – Lighting, Signing and Parking Plans
•Maryland Dept. of Transportation – Interstate 95 M.O.T.
•Baltimore City Streetscaping – Baltimore and Carolina Streets
•Baltimore City Vault Plans - Baltimore Street from North Calvert to President Street
08/1996 – 09/1999 STV Incorporated Inc.
7125 Ambassador Road, suite 200
Baltimore, Maryland 21201
CADD Engineering Technician III
•Mr. Prosser worked in the CADD Department performing drafting and some design tasks. His experience was diverse and included the production of site development construction documents, highway construction documents, and master planning documents—both graphics and mapping products. He also participated in data capture and populating databases for GIS-related projects. Some of the larger projects Mr. Prosser participated in include:
•Baltimore City Utility Mapping – Conduits
•Skytower Redevelopment, Washington, DC
•Murphy Homes Redevelopment, Baltimore, MD
•Fort Detrick Utility Mapping
•Housing Community Studies, US Army Corps of Engineers, Europe
•Lexington Terrace Redevelopment, Baltimore, MD
•Lafayette Redevelopment, Baltimore, MD
10/1995 – 1/1996 Frederick Ward Associates, Inc., Bel Air, MD
CADD Operator
•Mr. Prosser was an Exxon engineer draftsman with four months experience in computer-aided design and drafting (CADD).
•Responsible for completion of civil engineering design plans and drawings that were prepared by employing Intergraph MicroStation Version 5.0.
•Created and redesigned Exxon mini-marts and gas stations.
•Created marketing plans for Exxon as proposals.
5/1987 – 10/1995 Engineering Technologies Associates, Inc., Ellicott City, MD
CADD Operator, Draftsman
•Mr. Prosser was a civil engineering draftsman with over eight years of experience in computer-aided design and drafting (CADD). He was responsible for completion of civil engineering design plans and drawings that were prepared manually or employed CADD. Mr. Prosser is proficient in the use of AutoCAD Release 12.0, and in the application of AdCadd and DCA civil engineering design software packages.
•Mr. Prosser prepared design drafting products for numerous private and government clients. Project examples include:
•Oakland Mills Road alignment and improvements for Howard County, MD.
•Site plan, storm drainage design plan, oil-water separator design plan for the 89th Airlift
Wing Ground Command, Andrews Air Force Base.
•Underground storage tank removal and replacement at Ft. Myer, Virginia, and Ft. McNair, Washington, DC.
•Stream restoration of White Marsh Run for the Maryland State Highway Administration.
•Stream restoration of Stemmers Run in Double Rock Park for Baltimore County, MD.
•Henson Creek storm water/water quality management ponds and wetland mitigation design for Prince George's County, MD.
•Capping and closure of the Norris Farm Sanitary Landfill in Baltimore County, MD for Browning-Ferris Industries.
EDUCATION
Associates Degree - Engineering Science
1984-1989 CCBC Essex College
7201 Rossville Blvd., Rosedale, Md. 21237
443-***-****, http://www.ccbcmd.edu/
Engineering Courses
1991-1992 CCBC Catonsville College
800 South Rolling Rd., Catonsville, Md. 21228
443-***-**** http://www.ccbcmd.edu/
High School Diploma - Drafting Technology
1980-1984 Kenwood High School
501 Stemmers Run Rd., Essex, Md. 21221
410-***-**** http://kenwoodhs.bcps.org/
ADDITIONAL PROFESSION DEVELOPMENT AND TRAINING
Computer-Aided Design Drafting
AutoCad (v.2008-2010) 1987-1994, 2007-2014
MicroStation (v.8i) - 2D and 3D Modeling 1994-2014
Engineering Software
In-Roads (v. 201*-****-****
Auto-Turn (v. 7.0) 2011
ArcGIS (v. 9.0) 2010-2011
Manual Design and Engineer Labor
Manual Engineering Drafting 1987-1994
Field Work – (survey, data entry, etc.) 1989-1993 `1999-2016
Rendering – (Charts and Presentations) 1990-1993, 1996-1999, 2005-2011
Volunteer
Cox's Point Haunted Mansion - Designer and Builder of Haunted Sets on Cadd and Stage Manager
Baltimore County Recreation and Parks
October 2002 – June 2004 (1 year 9 months)Arts and Culture
Construction, acting, script writing and designing new rooms and floor plans of haunted house using Microstation v8 and v8i cadd with using 3d modeling. 2002-2004
American Red Cross
Certified FIRST AID, CPR and AED
American Red Cross
March 2011 Health
Softball Coach and Youth Ministry
St. Clare's Church
March 2002 – August 2003 (1 year 6 months)Children
Assist. Coach for the Youth Ministry at Saint Clares Church. Teaching the fundimentals of softball and being a roll model/ adult for troubled teens.