Babar Shafiq

(Instrumentation and Control Engineer)

E-mail: adcuzl@r.postjobfree.com

Mobile: +92-333-******* & +92-314-*******

Passport Number : BQ 5180573

Date Of Birth : 29th-May-1987

Current Location : Lahore, Pakistan.

Professional Reference : Tariq Mushtaq, GE Senior Contract Performance Manager

PGS-East Med – Pakistan : Cell # +92-300-******* ; E mail: adcuzl@r.postjobfree.com

CAREER OBJECTIVE

Looking for an opportunity in a growth oriented organization, which offers diverse job responsibility where I can flourish my potential, abilities and provide genuine services.

PROFESSIONAL EXPERIENCE

1)Nishat Chunnia Electric Company Limited (Lahore, Pakistan); From Nov 06, 2015 till date :

Deputy Manager Instrument & Control :

Currently I am working as an Deputy Manager Instrument & Control at 46 MW Coal Fired Captive Power Plant, Summary of my work is mentioned below,

oCurrently I am responsible for supervision of all Control and Field Instrumentation system Maintenance of the plants, day to day maintenance activities and planning for shutdown maintenance.

Additionally I was involved from client side and performed below mentioned activities with Chinese EPC CSEEC (China Sinogy Electric Engineering Company).

oPlayed an Important role in the Instrumentation and Control installation and commissioning activities at the new configure power plant.

1 x Siemens steam Turbine(SST-400) and Auxiliaries.

1 x 46MW Siemens generator.

2 x 110t/h CFB coal fired boiler.

oSupervised testing and commissioning of Siemens Turbine control system with S7-400 PLC and Emerson CSI 6300 SIS Digital Over speed Protection system and related communications.

oSupervised testing and Commissioning of Bentley Nevada BN3500 Machinery Protection System for Siemens steam turbine and Envada EN8001 Vibration Monitoring System for Boiler auxiliaries.

oPerformed testing and Commissioning of Honey-well Plant Cruise DCS system with C300 controllers.

oPerformed functional and Loop testing of all Filed I/O’s & modifications in logics.

oCheck and verify the equipment according to design parameters provided by the contractor.

oCheck and verify the equipment according to design parameters provided by the contractor.

oPerformed testing and Configurations of Instruments like Thermocouples, RTDS, Pressure Transmitter, Flow transmitters, Magnetic Flow transmitters, Ultrasonic Flow meters and Analyzers according to Hookup drawings, P&ID, Piping Isometrics.

oInstalled and configured Motorized and pneumatic control valves, MOV’s and SOV’s.

2)HYUNDAI ENGINEERING (THAILAND) CO., LTD. May 01, 2014 till OCT 31st, 2015:

Warranty Manager: (1 Year & 6 months)

I worked as a Warranty Manager at UCH2 404 MW Capacity Combine Cycle Power Plant including two (2) GE Gas Turbines(Frame9E),One(1)Steam Turbine, Two (2) Heat Recovery Steam Generators & associated Auxiliaries and Balance of Plant. My work detail is giving below,

oHandle the tasks of checking the rejected products and return the rejected claims of the dealer.

oInvolved with the GE CPM on the GE warranty system to solve the warranty claims with GE PAC

oHave a sound knowledge of the GE warranty system.

oMonitored all logs for claims, investigated each individual case.

oMonitored all customer products for warranty claims and ensured its repair or replacement.

oCoordinated with customers and ensured timely delivery of faulty equipment.

oManaged all warranty claims by customer and investigated reason of return.

oCollaborated with warranty team and determined status of all customer activities.

oManaged all warranty data and generated regular reports on same.

oDecide based on each producer’s procedures if the claimed problem is or is not warranty related issue.

oKeep accurate records of warranty submissions, rejections and customer contributions towards goodwill claims.

oMaintain knowledge on all warranty procedures and documentation.

oSupport other staff members on all warranty related matters.

3)HYUNDAI ENGINEERING (THAILAND) CO., LTD.· November 01st, 2011 till April 30, 2014:

I & C Engineer: (2 Years & 6 Months)

I worked as an Instrument and Control construction and commissioning Engineer at UCH2 404 MW Capacity Combine Cycle Power Plant including two 2x129MW GE Gas Turbines (Frame 9E), One 1x133MW Steam Turbine, Two (2) Heat Recovery Steam Generators & associated Auxiliaries and Balance of Plant.

GE Gas Turbines (Frame 9E)

oEnsure the correct GE installation, pre-commissioning and commissioning practices are followed throughout the project, filling and/or requesting sub-contractors to fill the relevant check lists.

oCommissioning, maintenance and troubleshooting activities of GE Frame-9E Gas Turbines controlled by GE Speedtronic MarK-Vie control system.

oIndependently handling all field instrumentation jobs during pre-startup jobs of 2 GE Frame-9E (Approximately 260 MW) Gas Turbines.

oCheck the functionality of the control sequencing for all auxiliary systems, relevant to the turbine and driven equipment’s, such as lube oil system, hydraulic oil system, oil coolers, starting means (motor & torque converter / gas expander / hydraulic starter & pumps / etc.), gas & fire detection system etc.

oCheck the proper and safe operation of the above mentioned auxiliary systems, by evaluating the running parameters (temperature, pressure, vibration, noise, etc.) and making the necessary adjustments as required.

oInvolved in the commissioning activity of the GE Gas Turbines (Frame 9E) On MARK VI e, functional checks of all Instruments including

oSpeed Pickups gap checking

oSeismic vibration sensors

oDistance adjustment of Bentley Nevada Vibration sensors,

oFlame Detectors, Spark plugs,

oPneumatic valves, LVDTs, Solenoids etc.

oIGV calibration, SRV calibration(Stroke checks)

oGCV Calibration(stroke checks)

oHazardous leak Gas Detectors,

o VTRs

Steam Turbine(Fuji Electric)

oInvolved in the construction activities of all instrumentation of the steam turbine (FUJI).

oInvolved in Pre-Commissioning and commissioning activities of Steam Turbine.

oInvolved in the Functional checking of different instruments installed on Steam turbine

oTroubleshooting of different equipment problems during the startup and operation.

DCS (Distributed Control System):

oDistributed Control Systems (DCS) Engineer at Central Control Room (CCR)

oWorking Experience with Honeywell T.A’s (Hardware & software) & Using Experian PKS (Process, Knowledge, system) 400.2 server at Intermediate level in DCS at CCR.

oCan Understand & modify the Logic & Loop diagrams of all the systems.

oComplete hold on Honeywell DCS Racks (Controller & I/O Modules) w.r.t construction & Troubleshooting.

Site BOP:

oSupervise all the field instruments Installation in other fields including 2 GE Frame 9E Gas turbines, 2 HRSGs,1 Steam turbine, Balance of plant area.

oCo-ordinate & supervise with the Lab Engineers for the calibration of all the Instrumentation i-e Temperature Elements, Transmitters(ABB, Rosemount/Emerson) etc.

oInvolved in the calibration of MOVs, Control Valves (TCVs, PCVs, FCVs)

oMonitoring of C&I construction, pre-commissioning & commissioning work as per plan.

oI have also been involved in the Installation of different instruments and there functional checks.

oInvolved in the CEMS (SWAN) Instrument Installation and commissioning .

oCoordinate with owner's engineers regarding project documents approvals, progress review meetings and site related queries also having working experience with different vendors technical Advisors (GE, Honey well, Fuji etc)

oCommissioning and start-up. Troubleshoot gas turbine and driven equipment operating problems as they arise.

oPerform gas turbine and driven equipment checks at various running conditions: crank, fire, full speed no load, partial, base load, Full Speed Full Load (FSFL)

INTERNSHIPS

1) At OGDCL (Oil & Gas Development Company Limited): (11 Months)

I was trainee Instrument Engineer in Instrumentation & Control department from October 1st,2010 Till AUG 10th,2011 .

PROFESSIONAL TRAININGS:

1) Completed 10 days of DCS Plant cruise implementation training course at Honeywell Automation college China.

2) Basic Health,Safety, Environment and Quality (HSEQ) Certificate (OGDCL).

EDUCATION :

Bachelor of Electronics Engineering (04 years),(Comsats) Pakistan.

Final Year Project : FACTS (Flexible A/C Transmission System) Simulation in Matlab

PROFESSIONAL MEMBERSHIP :

Pakistan Engineering Council Registration No. ELECTRO/14191

Contact this candidate