JOSE ALBERTO BEJARANO

adci5w@r.postjobfree.com - adci5w@r.postjobfree.com

U of A - Student Identification Number:1566595

Education:

Mar/20 – Present - Specialization Course in Applied Statistics National School of Statistics and Informatics, Peruvian Government Peru 180 hours course in statistical methods applied to scientific research. May/19 – MSc in Welding Engineering

Pontifical Catholic University of Peru (PUCP) Peru Two years advanced program according with the International Welding Institute politics and requirements, aimed to obtain the International Welding Engineer title. Research project: “Study of the welding shielding gas influence on the final hyper duplex stainless steel UNS S32707 properties”

Thesis grade: Outstanding

Grade point average: 14.6 / 20

Jan/18 - Research 900 Program. International Visiting Student Canada University of Alberta

Canadian Center for Welding and Joining

Mentor: Dr. Patricio Mendez.

Research Project: “Design and Construction of a Measurement of Diffusible Hydrogen System for Martensitic, Ferritic and Bainitic Steels under ISO 3690 standard” Oct/09 – BSc in Mechanical Engineering

National University of Colombia (UN) Colombia Five years program with emphasis in thermodynamics, mechanical design, manufacturing processes and materials science.

Thesis: "Design of a Thermal Spray Laboratory for Mechanical Parts Recovery in Naval Industry". Sponsored project by the Corporation of Science and Technology for the Development of the Naval and Fluvial Industry – Colombian Navy. Thesis Grade: 5.0 / 5.0

Grade Point Average: 3.8 / 5.0

Nov/02 - Bachelor in Technological Design

National Pedagogical University (UPN) Colombia 4.5 year academic program focused in teaching of mechanical and industrial design. Thesis: “Bionics as a tool for mechanical design teaching”. Thesis Grade: 5.0 / 5.0

Grade Point Average: 4.2 / 5.0

ALBERTO BEJARANO

[Escribir el título del documento]

2

Jul/02 – Technical Professional in Mechanical Design Central Technical Institute of La Salle Colombia 2.5 year technical program focused in materials science, production and mechanical design.

Research project: “Design of a mechanism to test home appliances under fatigue load for Challenger S.A.”

Grade Point Average: 4.4 / 5.0

Additional Training:

2019 – Arduino Programming

National University of Engineering - Peru

2018 – GMAW Welding

Productive Technical Educational Center - Peru

2018 – GTAW Welding

Productive Technical Educational Center - Peru

2016 - International Costumer Experience

Lincoln Electric Co. - Mexico

2015 – International Pipeline Seminar

Lincoln Electric Co. - Peru

2014 – Procedures and Welders Qualification under ASME BPVC Code,Section IX. American Society of Mechanical Engineers : U.S.A.

2014 – Fundamentals and criteria for ASME stamping in pressure vessels. American Society of Mechanical Engineers – Engineers College of Peru - Peru 2013 - Preventive Corrosion Methods.

Corrosion and Protection Institute – Pontifical Catholic University of Peru 2012 - Advanced Product Knowledge Training Program Lincoln Electric Co. – Cleveland Ohio, USA

2011 - 1

th

Technical Training Process in Electrical Welding

ESAB - Soldaduras West Arco – Colombia

2010 - Safe work in height – Certification

National Training Service -SENA - Colombian Government - Colombia 2008 - GMAW (Gas Metal Arc Welding).

National Training Service -SENA - Colombian Government - Colombia 2008 - Polymers characterization.

National Training Service -SENA - Colombian Government - Colombia 2008 - Thermo stable Polymers.

National Training Service -SENA - Colombian Government – Colombia ALBERTO BEJARANO

[Escribir el título del documento]

3

2008 - Codes and Standards in Welding.

National Training Service -SENA - Colombian Government - Colombia 2007 –Training Seminar for the qualification and Certification as Welded Structures Inspector. Colombian Association of Welding and NDT – ACOSEND – Colombia 2007 - Intensive Training Seminar in Visual Welding Inspection. Colombian Association of Welding and NDT – ACOSEND – Colombia 2006 - Management for Small Engineering Business.

Colombian Society of Engineers – Bancoldex - Colombia 2005 - Strategic Cycle for Start - Up Generation.

Bogotá Commerce Chamber - Colombia

2005 - Basic Dimensional Metrology.

National Training Service -SENA - Colombian Government – Colombia 2004 - Solid Edge Modeling

National Training Service -SENA - Colombian Government - Colombia 2003 - Solid Edge Modeling

National University of Colombia - Colombia

2003 - Fundamentals in Arc Welding.

OERLIKON - Colombia

2002 - Quality References for Science Education

National Pedagogical University (UPN) - Colombia

2001 - Biomedical Engineering Seminar

University of the Andes - Colombia

2000 - Communication of Research projects.

National Pedagogical University (UPN) – Colombia.

1999 - National Pedagogical University (UPN): Research methodology seminar. 1999 - FESTO: Basic pneumatic.

Experience:

Aug/19 – Present Lecturer

Pontifical Catholic University of Peru (PUCP) Peru Specialization Course in Welding Engineering – First year of master s degree Aug/17 – Present Independent Welding Engineering Consultant Peru Bosch Home appliances, Gigante, Tupemesa, Formin, Tupemesa, etc. ALBERTO BEJARANO

[Escribir el título del documento]

4

Jul/12 – Jul/17 Senior Applications Engineer Welding and Metal Fabrication PRAXAIR Peru

- Trained personnel: 600 people trained during 2016, with emphasis in the national 25 most important customers and their contractors including: RESEMIN, ESCO, METSO, Southern Cooper, Owens Illinois, Lindley Corporation (Coca Cola), Nestlé.

- Colombian logistics team supported, regarding welding and cutting equipment for resale B2B in Sud America. Suppliers: Lincoln Electric (Mexico, Poland, Colombia, China, USA), Victor Technologies USA – ESAB.

- Advised clients from Peru, Uruguay, Colombia and Bolivia.

- Peruvian Representation in the South America Metal Fabrication specialists group. TIE TEAM.

- Designed and qualified Procedures for welding and brazing processes for the internal use of Praxair including:

- Aluminum welding for cryogenic applications.

- Stainless steel welding for cryogenic applications.

- Dissimilar materials welding (Tanker trucks, valves, vaporizers etc.).

- Brazing for conduction of industrial gases at high pressure (Argon, Carbon Dioxide, Oxygen, Acetylene and mixtures for welding).

- Brazing for natural gas conduction in domestic applications.

- 6063 T4 Aluminum welding for cryogenic applications (Repair welding).

- Copper brazing for oxygen conduction in a molybdenum hydrometallurgy facility.

- QA/QC Fabrication of 4 pressure vessels for an Acetylene production facility.

- QA/QC Installation of pipelines for welding and cutting gases for 21 welding cabins. Peruvian Army Welding Laboratories – Canadian Government Donation.

- 21 training workshops designed for costumers in welding engineering topics. Including: ANSI Z49.1, NFPA 51.B, Cost estimations, Selections of shielding gases, AWS A5.32, Gas equipment, etc.

Sept/10 – Jun/11 Costumer Service Engineer

ESAB – (Soldaduras West Arco) Colombia

- Coordination of the Welding Institute in the department of Casanare.

- Facility design of the Welding Institute including: 8 welding cabins for training, cutting and grinding areas, samples bending area and administrative offices.

- 10 educational videos about the use of gauges for welding inspection training.

- Several WPS, PQR and WPQ developed, based in API 1104, AWS D1.4, AWS D1.1 and ASME Section IX.

- Assisted and trained clients in welding engineering topics including BP - British Petroleum Company and the National Oil Company - Ecopetrol. Jan/10 – Aug/10 Mechanical Field Engineer

Guajira Development Consortium Colombia ALBERTO BEJARANO

[Escribir el título del documento]

5

- Welding inspection of 29 km of potable water pipeline (0.8, 1.8 and 2.4 m diam.) based in AWWA – American Water Works Association standards.

- Welding inspection and installation of electromechanical valves and general mechanical equipment (Howell-Bunger Valve 1.5 meters diam. and Principal Project Butterfly valve 2.5 m diameter).

- Authorized payments to contractors, according to the Project Technical Specifications, for US $8,000,000.00

Sept/10 – Sept/11 Instructor

“Future Education Institution” Colombia Technical school

Courses: Introduction to welding, Metrology, Codes and Standards in welding, Engineering Materials, and Welding Inspection.

Program: Inspection of the construction of oil and gas pipelines. Two year program. Jan/08 – Dec/08 Metrology Engineer

Solteco S.A. (Crear 3D) Colombia

- 150 modeled mechanisms and mechanical parts for assembling and painting process in Solid Works and Solid Edge for MAZDA - Colombian Automotive Company. Jan/07 – Dec/07 Projects Coordinator – Internship

Colombian Association of Welding and NDT (ACOSEND) Colombia

- Responsible for supporting the association, mainly in the process of training and certification of welded constructions inspectors.

- Representative member of the Association in the Welding and NDT committee of the Colombian Institute of Technical Standards.

Aug/05 – Jul/06 Lecturer

National University of Colombia Colombia Faculty of Fine Arts - Industrial Design School

- Five year professional program with emphasis on products design, human factors and manufacture process.

Course: Environmental factors.

- Bicycle design, Ergonomics and anthropometry.

- “Bicirun” public system bicycles project: Commissioning Engineer for mechanical test on the biggest Latin-American public bicycles project in an university campus: 400 bicycles.Tests developed in Colombian Institute of Technical Standards (Icontec) under ISO 4210. http://historico.cartauniversitaria.unal.edu.co/ediciones/14/08.htm Aug/05 – Jul/06 Lecturer

National University of Colombia Colombia Faculty of Fine Arts - Industrial Design School

ALBERTO BEJARANO

[Escribir el título del documento]

6

Five year professional program with emphasis on products design, human factors and manufacture process.

Course: Industrial Factors I

- Fundamentals in engineering materials for artists.

- Manufacture process for artist.

Certifications:

Jul/17 IWE International Welding Engineer – IWE : ES/IWE/1524 International Institute of Welding (IIW), and CESOL, Spain. IIW Guide IAB-252 “Personnel with qualification for Welding Coordination” Jul/17 EWE European Welding Engineer – EWE : ES/EWE/1524. European Federation for Welding, Joining and cutting (IIW) and CESOL, Spain IIW Guide IAB-252 “Personnel with qualification for Welding Coordination” Apr/15 CWI Certified Welding Inspector: 15122431.

American Welding Society

Recognitions:

Feb/08 – May/08 Scholar

National University of Colombia

Recognition for good academic performance that consists of supporting the academic activities of a specific professor.

Mentor: Dr. Jhon Jairo Olaya Florez.

Activities: Support to Dr. Olaya’s academic and administrative activities. Aug/06 – Dec/06 Scholar

National University of Colombia

Recognition for good academic performance that consists of supporting the academic activities of a specific professor.

Mentor: Dr. Miguel Baquero.

Activities: Support to Dr. Baquero’s academic and administrative activities. Jul/01 – Nov/01 Honor’s registration

National Pedagogical University

One time. Recognition earned after obtaining the best faculty GPA on a specific academic period.

Jan/99 – Nov/02 Honor’s registration

Central Technical Institute of La Salle

ALBERTO BEJARANO

[Escribir el título del documento]

7

Five times. Recognition, earned after obtaining the best faculty GPA on a specific academic period.

Publications:

1. Bejarano, J.A., Gómez J.A. “Safety in welding and cutting of metals under ANSI Z49.1”. 44

th

Health, Environment and Safety Congress.

Colombian Safety Council, Colombia, 2011

2. Bejarano J.A. “Considerations in Design and Related Factors in the Behavior of Welded Joints Under Fatigue Load”.

3th National Congress of Mechanical, Electric and Electronic Engineering. Metropolitan University of Azcapotzalco – México, 2008. 3. Bejarano J.A. “Considerations in Design and Related Factors in the Behavior of Welded Joints Under Fatigue Load”,

8

th

Ibero American Congress of Mechanical Engineering. Pontifical Catholic University of Peru – Peru, 2007.

4. Bejarano J.A., Monroy R. “Delta Ferrite Prediction and Measurement in Hyper Duplex Stainless Steels”.

International Welding Conference - ICONWELD 2018

Pontifical Catholic University of Peru – Peru, 2018. 5. Bejarano J.A. Méndez P. “Design and Construction of a Measurement of Diffusible Hydrogen System for Martensitic, Ferritic and Bainitic Steels”. International Welding Conference - ICONWELD 2018

Pontifical Catholic University of Peru – Peru, 2018. 6. Bejarano J.A “Welding Shielding Gas Influence in Hyper Duplex Stainless Steels” 21 International Welding Symposium.

Pontifical Catholic University of Peru – Peru, 2019. Volunteering:

Jan/09 – Dec/09 Computers for education Colombia Ministry of Information and Communication Technologies– Colombian Government Volunteer field engineer responsible for computers assembly in rural schools. Program: “Computers for Education” Computers donated by the national government to rural schools.

Service:

2015 – Current CWA Canadian Welding Association.

2012 – Current American Welding Society AWS.

2007 – Current Colombian Institute of Technical Standards. ICONTEC Committee Member No.5: Welding and NDT.

2004 – Current ASME American Society of Mechanical Engineers. ALBERTO BEJARANO

[Escribir el título del documento]

8

Languages:

- Spanish – Native speaker C2

- English – Independent user C1

- French – Independent user B1

Interests:

- Wall climbing, hiking and camping, Peruvian history and archeology, chess, design and manufacture of silver jewelry, bird watching, digital photography and wood working.

March/2020

Contact this candidate