KHAWJA TAMJID AUSAF JAN
Skype ID: Tamjidjaan
Passport no: -L1970151
Post-Applied for-Instrument and Control- Site Engineer
Having 7 years of Detail & Field Engineering, Project Execution and Commissioning experiencewhich includes Reviewing Instrumentation related Engineering Documents, As Built of Documents, Supervision & Inspection of Instrument related Installations, Calibration, Loop checking, FAT / SAT, Punch list clearance, Construction and Commissioning activities execution
For SCADA,DCS,handing over of sub-systems/systems, modifications as per site requirements, coordination with sub-contractors, vendor representatives and clients for Engineering, Construction & commissioning activities for Onshore Oil &
Gas, Thermal Projects.
Participating client kick off meetings, monthly progress review meetings, close out reports preparation. Prepare specific project schedule for Instrumentation activities, monitor and issue reports on the progress from contractors. Identify and advise Project Manager of potential
Technical issues and planning issues, and prepare and initiate corrective actions. Review and approve contractor's project execution procedures, method statements, Quality & Control Procedures. Communicate and coordinate other vendors, clients and contractors sound working relationships with them. Coordinate with Instrumentation and other multi discipline design
Resolving all engineering issues related to design, and client is giving technical clarifications to construction team, issuing FCN’s (Field Change Notifications) and approvals. Implementation and review of signal loop drawings, cable schedules, instrument hook-ups drawings, C&E diagrams, Duct bank- layouts, termination diagrams and instrument installation drawings, control room layout, interconnection diagram with electrical equipment and Construction and Commissioning Work packages in line with Client standards.
Bachelor of Technology in Electronics & Communication Engineering from R.V.S COLLEGE of Engineering and Technology, TatanagarJamshedpur, Jharkhand (Affiliated to RANCHI. University RANCHI) in 2008-2012.
Intermediate in science from Jharkhand Academic Council in 2006-2008
Diploma Egg in INDUSTRY SAFETY MANAGEMENT from (N.I.I.T.E) JAMSHEDPUR IN 2005-2006
Matriculation from C.B.S.E BOARD in 2004.
Knowledge of P& ID diagrams, ladder Logic diagrams, flow chart for trip, plant Inst. location drawing, wiring diagram, cable schedules, Inter connection Drawing., loop drawing, Relay & Gate Logic system diagrams, Hook up drawing.Hydraulic valve On/Off and control valve maintenance and its diagram, etc. working with Siemens & Foxboro DCS and Ovivo PLC.
Troubleshooting & Servicing of Rotork, AUMA (MOV) IQ actuator. All kind of valve maintenance.
Involved in day-to-day preventive maintenance for field instruments, individually and in a team. Inspection, calibration, loop simulation based on ISO procedure & standards.
Co-ordination with operation, preparing equipment for maintenance & returning to safe service.
Good experience in case study of plant & modification implementation to avoid failure repetition, excellent skill in fault analysis and rectification in control system and field device.
Having Good knowledge in servicing & calibration of smart instrument devices with HART compatibility on line and offline for Pressure, level, Temperature, Flow measuring instruments (It includes microprocessor based valve positioners mesoneilan SVI II AP) and servicing, calibration of pneumatic, hydraulic, motor operated valves and accessories (Positioners, Booster relay, lock up relay, transfer valves and position transmitters).
Partial stroke test on valve and periodic test of SOV. Isolation procedure with special key to isolate valve for test of Transmitters.
Day to day maintenance of rotating equipment’s protective control system.Bentley Nevada vibration-monitoring systems probe installation and Calibration of probes and Monitors with TK3.
Shutdown, start-up sequence checking, monitoring the status in DCS and answer back confirmation.
During the period of my work experience, I have been associated with commissioning & Maintenance. Calibration of all types of Pneumatic Electronics Instrument of process plants.
During the period of my experience with various fields, I have used different makes Calibrators, simulators, tools.
Routine Calibration of Instruments
Loop checking and functional logic test of instruments.
Preventive & Corrective Maintenance / Repairs and calibration of all field instruments.
Performs Emergency maintenance of all equipment's on site, as well as machine scheduled/
Participates in the Factory Acceptance Tests (FAT) and Site Acceptance Test (SAT) of new control systems, to ensure that the new technology is transferred and accepted as per standard.
Understanding & verification of P&ID, SLD, and Hookup diagram,
Instruments specification sheets, control panel drawing, JB details and cable layout drawing.
Performs weekly, monthly and annual preventive maintenance on all instruments and maintain records such as calibration sheets, logbook and Check sheets as per set procedures.
Traces faults, carried out repairs on site and undertakes to workshop for overhauling, testing and reporting feedback to supervisor and Engineer.
KNOWLEDGE FOR INSTRUMENTS HANDLED:
Druck pressure calibrator (DPI-603/620 & PV-620)and Altek loop calibrator (334A).
HART 275/375/475 field communicator and YOKOGAWA BT200 field communicator.
Loop calibrator FLUKE, UROTRON Micro Cal 2000+.
Bentley Nevada TK3-2E calibrator for vibration and rod drop sensor checking.
Altek 322-1thermocouple calibrator and 4363T RTD Calibrator.
Ametck-CTC650ATemperature bath for checking temperature elements.
Dead Weigt Tester like Druck, Beamex.
Low-pressure calibrator merical, fluke 721
PROFESSIONAL EXPERIENCE SUMMARY:
Company : AL TOUKHI COMPANY for Industry, Trading & Contracting.
Position : Instrumentation and Control Site Engineer.
Duration :July 2016 to February 2020
Project : Hail-2 Simple Cycle to Combined Cycle Power Plant-Hail, KSA. (440 MW)
Main Client:Saudi Electricity Limited, KSA.
Job description:Preparation and reviewing of Instrument Index, signal loop drawings, cable schedules, instrument hook-ups drawings, C&E diagrams, layouts, Termination diagrams and instrument installation drawings, control room layout, Interconnection diagram with electrical equipment and Construction andCommissioning Work packages in line with Client standards.calibrating and maintaining of pneumatic controllers & control valve.Maintenance and calibration of Continuous emission management system analyzers (CEMS), Calibration and maintenance of I/P, Positioners and feedback switches in control valves.Witness ofthe Impulse line Leak test, Continuity test and Insulation Resistance test &Responsible for maintain of all test records.Installation DCS system for Siemens and PLC system for OVIVO.Cold, Hot and Confined space work permit Receiver.
Installation all field instrumentation for HRSG, STG, ACC, WTP.
Installation DCS system for Siemens.
Preparation and reviewing of Instrument related Method Statements and working
Supervising the activities Instrument cable installation, Instruments installation,
Junction boxes installation.
Supervision of Control panels erection, Cable Glanding and terminations.
Preparation of MAR (Material Approval requests) and submission to client for
Providing engineering support for site construction Team.
Providing Instrument department support for all operations.
Conducting Site survey for planning and executing of Instrument Construction and
Commissioning Activities as an Instrument Engineer.
Planning and executing instrument Construction & Commissioning works for
Hail Saudi Electricity Company project.
Responsible for Instrument Calibration & testing activities.
Preparing daily progress reports and submitting to clients.
Inspections of Instrumentation related material received from different vendors.
Playing major role in completion and handing over of projects to Client.
Attending Weekly, Bi-Weekly, Monthly progress review meetings with Client.
Attending Kick-off meetings with Vendors/Client for Execution of work in site.
Inspections and participating in Punch walk downs for getting system clearance.
Company : Vemagiri Power Generation Limited (GMR), Andhra Pradesh
Position : Instrumentation and Control Site Construction Engineer.
Duration : March 2014 to April 2016
Project : Vemagiri Phase-I Combined Cycle Power Plant (388.5 MW)
Main Client:LARSEN & TOURBO LIMITED Chennai.
Job description:Installation andMaintenance of all instruments like Calibration, Pre commissioning, commissioning, Function test carried out calibration andchecking, upgrade the DCS system and functional logic testing. Carried out skilled trouble shooting, repair and preventive maintenance work on site and in workshop, on a range of instruments and systems. Diagnose faults, carried out repairs on site, and undertake workshop-testing, overhaul and repair. Testing and maintenance of Fire & Gas systems in Plant and buildings Fire alarm panel, Sprinkler systems. Trouble shooting and testing of detectors related with Fire and Gas system like Smoke Detectors, Flame Detectors.
Complete Automation Engineering and service
Calibration of Field instruments (Emerson Rosemount, ABB, Honeywell, Yokogawa etc.)
Maintenance and calibration of control vales
Maintenance and calibration of transmitters (Yokogawa, ABB etc.) and process switches
Monitors the performance of the electrical, Instrument, automation systems
Analysing new automation system requirements and implementing solutions to achieve
RTD and Thermocouple checking and temperature transmitter calibration.
Designing and assembling the control panel
Preparation of I/O lists, technical data sheets, inspection and calibration reports
Carried out inspection of field instrument installation works
Planning required up-gradation for instruments to achieve production quality and cost minimizing
Suggested improvements in electric contactor and SCADA designs
Reviewing of instrument related drawings, engineering details and documents etc.
Ensure that electrical and electronic systems meet statutory and regulatory
Consulting and helping other team members in resolution of problems related to
Development and testing
Company:S.S INTERNATIONAL ENERGY PVT LTD, KOLKATA.
Position : Instrumentation and Control Site Engineer.
Duration : 14th Jan 2013 to 24th Feb 2014
Project : Power Plant (BANKURA) WEST BENGAL KOLKATA. (45 MW).
oInstallation all field instrumentation for HRSG, AFB, STG, ACC, DIVERTER DAMPER, WTP, ASH- HANDLING SYSTEM & PLC.
oTest and commissioning for all instrument and control system.
I can handle all types of work like layout drawing, P&ID & HOOK- UP drawing.
I can handle all types of demolition & modification job by the help of workers as per job requirement assign
I have also maintenance work like preventive maintenance (P.M) job
Making daily progress work report
All the installation drawing, termination drawing.
Checking of Airline, Impulse-line.
Work on cable laying or pulling, termination and conducting according to the plant requirement.
All types of works, which related with Control Room, DCS (ABB make), and Plc.
Pre Shut down work, cable continuity Loop checking, meggring.
Glanding work, Instrument mounting and J.B cable termination.
Calibration of all types of electronic and pneumatic instrument like LT, PT, FT, TT.
All types of gauges calibration through the comparator, pneumatic and hydraulic process work done.
Sov’s servicing work, switches.
All types of control valve calibration (Marshal Forbes&Mill)
Experience in maintenance of all types of temperature elements such as RTD, Thermocouples.
Working experience in SCADA, TGP, TCP.
Experience in maintenance and calibration of temperature, pressure, and flow and level transmitter such as Rosemount, Yokogawa and Honeywell etc.
Experience in maintenance work on pneumatic screw compressor like Chicago pneumatic (CP 075), Instrument Air dryer.
Experience in maintenance of all types of filter like air filters, lubricator oil filter such as (shavo), all NRV’S, Relay’s.
Experience of turbine vibration check.
I am a hardworking and sincere person.
I will try to encourage & guide my Co-workers to do work perfect & proper.
I work as a part of a team on Project field Environments, sometimes under great working pressure. Here flexibility and initiative were essential.
Willing to work in project Sites.
Creative problem solver with a strong work ethic
Strong Verbal and written communication skills.
An effective communicator with excellent relationship building & interpersonal skills, Strong analytical, problem solving & organizational abilities Possess a flexible & detail oriented attitude.
INDUSTRIAL TRAINING DURING BACHELOR OF TECHNOLOGY
●VOCATIONAL INDUSTRIAL TRAINING completed from BOKARO,STEEL AUTHORITY OF INDIA (S.A.I.L).
Review of P&I diagrams, cause and effect diagrams, instruments lists, flow charts etc.
Familiar with engineering standards IEEE, ANSI, IEC,etc
Familiar with QA/QC procedures
●Microcontroller based Alarm system.
MS-office complete (words, Excel, power point, Access) MS-window (xp, 7, vista) Auto-CAD.
Father’s Name - Khawja Tohid Jan
Date of birth - 10-07-1989
Marital status - Single
Sex - Male
Nationality - Indian
Religion - Islam
Driving License - India
C/O KHAWJA TOHID JAN, F/O KHAWJA TAMJID AUSAF JAN
BHAGA More, NEAR BHAGA RAILWAY STATION P.O: BHAGA, P.S: JHARIA, DIST: DHANBAD (828301)
STATE: JHARKHAND INDIA.
Home Contact No: +919*********
Passport no. - L1970151
Place of Issue - RANCHI, JHARKHAND (INDIA)
Date of issue - 07-10-2013
Date of expiry - 06-10-2023
English, Arabic, Hindi, Urdu.
I am driven by high degree of aspiration & I am determined to excel in whatever I take charge of, with the virtue of my professional qualification, common sense, good upbringing, hard work, sincerity and above all positive attitude towards life. I believe in integrating my ambition with the corporate goal.
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.
Date: 16-02-2020 Signature
Place: Hail, (Saudi Arabia) (Khawaja Tamjid Ausaf Jan)