Yousef Sayed Hussein Muhammed * Eletry St., Abdo Basha, Elwayli, Cairo, Egypt.

QA/QC Inspection Engineer Mobile: 02-011********/010********. E-mail: adcd59@r.postjobfree.com

Objective

A challenging career opportunity in the field of metallurgical and materials engineering that utilizes my academic background, skills and work experience. Education

B.Sc. degree in Metallurgical and Materials Engineering.

- Faculty of Petroleum and Mining Engineering, Suez University.

- Date of Graduation: July 2013.

Certificates

AWS Certified Welding Inspector (CWI Certificate Number: 15044211).

IRCA Approved and Certified ISO 9001:2015 Auditor.

Level II in Visual Inspection Testing (VT) according to ASNT SNT-TC-1A.

Level II in Dye Penetrant Testing (PT) according to ASNT SNT-TC-1A.

Level II in Magnetic Particle Testing (MT) according to ASNT SNT-TC-1A.

Level II in Ultra Sonic Testing (UT) according to ASNT SNT-TC-1A.

Level II in Radiographic Testing (RT) according to ASNT SNT-TC-1A.

Total Quality Management (TQM) and Lean Six Sigma Green Belt. Experience

Working from December 2018 till Now at:

Company : Maire Tecnimont (Main Contactor).

Position : QA/QC & Mechanical completion Engineer.

Projects : KIMA Ammonia & Urea Fertilizer Plant

Work scope : -Witness site Inspection and NDT activities and Review Subcontractor’s Reports & RFIs (Orascom Construction)

- Review and check test package (as built drawing, punch list, P&ID, NDT reports, welding summary, calibration equipment’s Reports used in hydro test and hydro test reports.

- Witness during Hydro test, pneumatic, draining, drying and Flushing test.

- Co-ordinate Subsystem Joint walk down between Subcontractor, Main Contractor& Owner (KIMA) or Owner Rep. (ENPPI)

-Monitoring All construction, Pre-commissioning, commissioning& Mechanical completion Activities and all outstanding punch points According to the Handover Procedure.

Working from June 2017 till November 2018 at:

Company : GS Engineering & Construction (Main Contactor)..

Position : QA/QC Piping Engineer.

Projects : Egyptian Refinery Company ERC (TAKRIR).

Work scope : -Co-ordinate all site NDT activities and Reports with NDT Subcontractor (APN) and TPI in HPU, SRU, SWS and

Interconnecting Units

- Review and check test package (as built drawing, punch list, P&ID, NDT reports, welding summary, calibration equipment’s Reports used in hydro test and hydro test reports.

- Witness during Hydro test, pneumatic, draining, drying and Flushing test.

- Ensuring that all materials installed after test (Reinstatement Punch cleared)

Working from March 2017 till June 2017 at:

Company : NCS Construction (Subcontractor).

Position : Senior QA/QC Engineer (Welding/Piping).

Projects : Beni Suef Combined Cycle Power Plant 4800 MW.

Work scope : -Co-ordinate all Inspection activities of Welding and Piping subsystems walk down with PSP ELSEWEDY & Siemens

HRSG 11 and 12 according to ASME I, ASME B31.1 2012, ASME B31.1 2014,NEM specifications and PSP Procedures. Working from May 2015 till March 2017 at

Company : ORASCOM Construction Industries (OCI).

Position : QA/QC Engineer (Welding/Piping).

Projects : - Egyptian Refinery Company Project.

Work scope : Responsible for Inspection of Welding and Piping systems in Utility and Tankage area according to GS specifications Working from December 2014 till May 2015 at:

Company : PSP ELSEWEDY (Main Contactor).

Position : QC Engineer (Welding/Piping).

Work scope : Inspection of piping systems,Boilers,Gas and Steam Turbines According to ASTM, AWS and ASME codes.

Responsibilities and Duties :

- Inspection of Materials received at site and workshop and review Their certificates according to ASME II and EN 10024(3.1, 3.2)

-Preparation of ITPs, WPSs for the company projects

-Qualification of Welders on different welding processes and Different materials as per AWS D1.1, ASME II and EN codes

-Visual Inspection of welded joints, Sand blasting and Painting.

-Witness Mechanical testing of Test coupons.

-Non Destructive Testing for Joints (MT, PT, RT & UT).

-Inspection of Inter phased Bus Fabrication for ATTAQA and Elmahmodia power plants according to ALSTOM specifications.

-Inspection of Piping Supports Fabrication for ATTAQA and Elmahmodia power plants according to AWS D1.1.

-Witness FAT test of GRE Piping at FPI industries Factory.

Projects : - Abu Qir Power plant :(Construction of a complete GRE Epoxy Service water (WS-system) piping system).

- Eltebbin Thermal Power Plant Rehabilitation Project.

- ATTAQA Simple Cycle Power Plant.

- El-Mahmodia Simple Cycle Power Plant.

Working from August 2013 till December 2014 at:

Company : Quality Engineering Group (Inspection and NDT Services).

Position : QA/QC Inspection Engineer.

Work scope : Third party Inspection and NDT of Oil Tanks, Steel Structure Buildings, Boilers and Turbines according to AWS and ASME Codes.

Responsibilities and Duties :

-Review Materials certificates.

-Review ITP, PQR, WPS and shop drawings.

-Inspection of Fit up, Dimensions and Heat treatment.

-Visual Inspection of welded joints, Sand blasting and Painting.

-Destructive testing of welding samples.

-Non Destructive Testing for Joints (MT, PT, RT & UT).

-Witness the welding repair.

Projects : - Suez Gulf Power Plant shutdown, Powertek.

- Sidi Krir Power Plant shutdown, Powertek.

- Elkattamia crossing bridge, ORASCOM Construction Industries.

-The seventh Sector bridges at Alexandria, The Arab Contractors.

- Portsaid East Power Plant shutdown, Powertek.

- Elmosheer crossing bridge, ORASCOM Construction Industries. Extracurricular activities

Fund raiser at Enactus Suez (September 2012 till July 2013)

Usher at FameLab competition at Suez Canal University (February 2013)

Logistics member at ESME ( Egyptian Society of Materials Engineers )

(September 2011 to May 2012)

Usher at CEDO (Career & Entrepreneurship Development Office) Job Fair at Faculty of Engineering, Cairo University (July 2011 and July 2012)

Video editor at Media Balady Corporation (March till May 2011) Courses

Technical

Basic Principles of ASME Codes :( B31.1, B31.3, ASME II, ASME VIII, ASME IX).

API 653 Preparation Course by Eng. Mohamed Amer (Certified API 653 Inspector).

Different inspection methods & ASME codes seminar By Eng. Ibrahim El Dosouky

(Cairo Inspection Company CIC general manager)

Soft

Entrepreneurship strategies and presentation preparation for 3 days at BUE by Mr. Hesham Elzeiny through Enactus Egypt (Jan 2013) Competencies skills

Computer competencies : MS ( Word, power point,Excel)

Languages : - Arabic (native language)

- English (V .Good command written and spoken)

- IELTS GENERAL TRAINING Test Score: 7.0

Personal information

Nationality: Egyptian.

Marital status: Married.

Military status: Exempted.

Date of Birth: 14/11/1991.

Hobbies: Reading and socializing.

References

References available upon request

Contact this candidate