Sign in

Electrical Engineer Engineering

Riyadh, Saudi Arabia
March 14, 2020

Contact this candidate




The HRD Manager

Subject: Application for the post of "QAQC Manager"

Respected Sir,

I (Mohammed Afzal Hussain) M.S in Electrical Engineering from Europe (Sweden) having 16 years of experience in electrical projects in Europe, Gulf and India. Site execution, electrical installation in MONO RAIL Project with ANSALDO,METRO Riyadh, residential, commercial Villas and High Rise building, Oil and Gas projects related to MV, LV and ELV.

My academic qualification and practical experience in various projects and zeal to put in handwork, has given me the confidence to shoulder my challenging responsibilities and execute the job to the best satisfaction of the Clients.

I wish to offer my services for your esteemed organization. Here with I am attaching my resume for your kind perusal.

Looking forward for your reply as per your convenience.

Thanking you,

Yours Sincerely

Mohammad Afzal Hussain.


Mohammad Afzal Hussain Saudi Resident Permit: Transferable.

M.S Electrical/Electronics Engineering Contact no: +966*********.

B. Tech Electrical/Electronics Engineering E-mail:

Career Profile: Seeking a challenging and responsible position in Construction, Quality control or management in any professionally managed organization that can effectively utilize my skills and provides potential for further building of my knowledge, growth and development. Saudi Aramco Approved Quality Personnel, involved in inspection and supervision for projects of Saudi Aramco. Familiar and experienced in International and Saudi Aramco Engineering Standards (SAES), Saudi Aramco Typical Inspection Plan (SATIP), Saudi Aramco Inspection Checklist (SAIC), Saudi Aramco Test Report (SATR), National Electric Code (NEC)/NFPA 70, NETA, NEMA VE1 and VE 2, procedures, standards and specifications requirements for the implementation of the projects. Familiarity on QA/QC procedures, Schedule "Q", and ISO 9001 System. Well-oriented in HSE, Construction Safety Practices.


Master of Science in Engineering (Sweden, Gavle University (Attendant)) (2006-2008).

Bachelor of Technology (Electrical and Electronic Engineering.) (1999-2003).

Experience Details : Total 14+2 years (Includes 2 years MS Engineering).

Certification : PMP Modules 2016 (Traccert-Canada).


Project : METRO Project (Ramped & Riyadh Development Authority).

Designation : Sr.QA/QC Engineer.

Duration : Mar 2018 to Till now



Designation : QA/QC Engineer.

Duration : Oct 2017 to February 2018.



Designation : Sr. QA/QC Engineer.

Duration : August 2017 to Sep 2017.



Designation : Sr.QA/QC Engineer.

Duration : Feb 2017 to July 2017.

4) Company : Innovation Communications AD, KSA.

Project : Abrajul Kudai Project.

Designation : Sr. Project Electrical Engineer.

Duration : Nov 2015 to July 2016.


Project : Saburban Project.

Designation : Sr Electrical Engineer.

Duration : Apr 2013 to Oct 2015.

6) Company : Abdullah Al Mahri Contracting Company, KSA.

Project : Al-Mahri Project(Buildings).

Designation : Sr. Electrical Engineer.

Duration : Sep 2012 to Mar 2013.

7) Company : Advanced Vision Electro-Mechanical Works(SBG), KSA.


Designation : Sr. Project Electrical Engineer.

Duration : May 2010 till Aug 2012.

8) Company : Star Electricals Pvt. Ltd., INDIA.

Designation : Sr. Electrical Engineer QA/QC.

Duration : Aug 2008 to April 2010.

9) Company : ASTRON, Netherlands.

Project : LNA for SKA of Netherlands.

Designation : Research Project Engineer.

Duration : July 2007 to May 2008.

10) Company : Saudi OGER Ltd., KSA.

Designation : QA/QC Electrical Inspector.

Duration : July 2004 to Jun 2006.

Project : KJC Project (ARAMCO).

11)Company : GVPR Engineers Pvt. Ltd., INDIA.

Designation : Electrical Engineer

Duration : Jun 2003 to July2004.

Sr.QA/QC Engineer Duties and Responsibility:

Energization package preparation prior to power up of subsystem and system in presence of client.

Co-ordinate with operation & maintenance department with regards to start up and commissioning activities and various other instrumentation related works.

Inspect and propose in the proper installation of grounding works such as grounding rod installation, cad weld connection.

Inspection of termination and installation of panels, motor and transformer, Lighting Fixture.

Review E&I aspects of detailed engineering and detailed knowledge of the Project scope of work, aims, timetable & systems.

Performed Quality Control Inspection and Testing activities according to the PQP, ITP and Engineering standard, Procedure, preparation of testing reports involved Hydraulic ESD panel, Multi Phase Flow Meter, Adjustable Frequency Drive, Battery Chargers, MOV, ZV, Switch Gear, Switch Racks, 13.8 KV power transformers etc.

Preparation of Project Quality Plan for awarded Contract Projects.

Ensure that the works being taken is in good engineering practice and conforms to client Engineering Standard, NFPA 70 (NEC), and other relevant standards, project requirements, and scope of works. Implementation of NEC, Saudi Aramco Engineering Standards (SAES), Saudi Petrochemical Engineering Standards, NEMA, ANSI and relevant engineering Standards.

Conduct inspection to all electrical and instrumentation works such as installation of cable tray, conduit layout, lighting and power system, grounding system, cable pulling and termination of electrical and instrument cables, field JB, control panel, and DCS, ESD cabinets at control rooms, motor and motor controller, instruments hook-up and installation of impulse tubing and air line, fire alarm system etc.

Well conversant of carried out of Projects activities, like reviewing, Checking, interpreting of all types of drawings and diagrams, data sheets, Specifications and whatsoever related to concern projects activities.

Technical Supports to Procurement, Estimation, and Identifying correct Material as per required Specifications, Codes and standards, Co-ordinate With production QA/QC and other related section to sort-out the problems.

Technically sound and fully responsible for safe execution of project in Instrumentation and Electrical and Mechanical works, execution of packages, Tray works Conduit works, Instrument Hook-up, Panel Installation and alignment, Wiring Termination, JB, Support, Local Panel Installation, Meggering and Continuity test and Commissioning works, etc.,

Witness the installation of Grounding systems, Thermite Welding and report the Ground Resistance testing records.

Preparing punch lists as per project scope of work.

Submission /Hand over the entire original testing records as per Engineering Procedures.

Aware about line check & punch listing. Witnessing and playing a pivotal role in the vendor testing Verify that the quality related site activities are in accordance with the applicable codes and standards

Issue NCR, Discrepancy report and ensure that the corrective action is completed to the satisfaction

Witness calibration of instruments and review calibration reports.

Inspection of all E & I equipments prior and after installation.

Preparation of inspection documents of E & I activities as per the approved inspection and test plan

Conform to all applicable requirements, standards, and specifications prior to release to be used as part of work.

Preparation of inspection report and documentation of all related discipline inspection and tests report (Test Pack/Dossier).

Ensuring Project Qualify objectives have been met according to standards and specifications.

Ensuring the quality of material received as per the standards and specification.

Ensuring the subcontractors personnel complied with the Project Quality Program.

Review and comment for documents like ITP’s, QVD’s, Procedures, FAT reports.

Inspection for the installation, operation and maintain of electrical wiring system and equipments.

Inspection of cable trench installation.

Inspection of cable laying on cable trench and cable tray.

Conduit installation inspection.

Inspection of RGS, PVC Coated RSC and EMT conduit items according to the drawings.

Inspection of Electrical and instrument cable termination.

Inspection of cabling, Meggar test termination, functional test and commissioning of instrument.

Inspection of raceways (cable trays, conduits, cable pulling) for power, control and instrument cables.

QA/QC inspections for all electrical, public address, paging and fire alarm system of the plant under construction.

Ensuring BISCI/RCDD approval to be complied on telecom IFC Drawings in ARAMCO project.

Inspections of Telecom and Electrical Duct Banks, HDPE Conduits for OSP/ISP network.

Inspecting data and voice cabling (UTP), testing with Fluke Meter, fiber optic cabling, Termination & Testing with OTDR.

Inspecting the Installation of Telecom MDF, IDF Patch panel, and Cable Termination and Fiber connector termination.

Coordinate with mechanical, civil and instrumentation inspectors for the completion of project as per standards and project specification.

Attending weekly QA/QC meeting, technical meetings and punch clearing meetings to help the contractor to do correct job.

Issuing construction punch list and NCR if needed.

Responsible for conducting internal and client inspections.

Responsible to conduct material inspection, prior to client inspection.

Modify QVD as per requirement.

Modify ITP's and Method Statements for the comments made by client.

Coordinate with turnover group to make handover documents related to QC department.

Coordinate with third party and conduct testing and pre commissioning of transformers, panels, cables and wires.

Sr.Project Engineer Duties and Responsibility:

Completing the site inspection according to planned schedule.

Inspection of telephone data cable, paging system, public address, fire alarm, TV system, CCTV, security systems.

Resolution of electrical problems on sites where necessary.

In-charge for overseeing all electrical inspection work.

Ensure the electrical work carried out is as per approved IFC drawing and within the time frame and progress of the approved construction program.

Ensure that the installation, inspection and testing of all the electrical equipment, fittings and work implemented meets the specification and the consultant requirements.

Inspection for installation of Wire ducts, Cable ladders, Cable trays, Transformers, RMU’s, LV panels, MDB’s, Generator panels, MCC, SMDB, DB, Lighting control panels.

Coordinate with other project personnel to ensure that deadlines, procedures, and other project requirements are met.

Record changes on site and Review markup drawings / as-built drawings.

Co-ordinate MEP/ Architectural inspections wherever necessary/ required.

Check site manpower/ resource/ plant/ machinery on site as required for quality procedures.

Investigates alleged violations of Construction Code and related ordinances.

Detect possible defects and faults in electrical systems and recommend or stipulate appropriate remedial measures.

Attends meetings with Contractors other discipline consultants and architects’ to solve construction related problems.

Mobilization and demobilization of manpower and construction equipments according to QC procedure.

Attending surveillance with the client and discussing crucial matters with client and our management.

Making and submitting weekly progress reports to the QC Manager.

Attend client meetings and satisfy their requirements.

Implementation of safety requirements for the equipments and manpower.

Research Project (Role team member)

Research work is done based on Ericsson Company’s demand.

Research is progressed to design a low noise amplifier for a square kilometer array in Astronomy department.

Attending Weekly meetings with professor’s and supervisor’s and technical team members about the progress of work.

Responsible to work with team members and supervise them to achieve the work as per IEEE standards.

Computer Skills/Tools:

Software: Auto CAD2014, REVIT 2014(MEP DESIGNING),NAVIS WORK (co-ordination), CGLUX, RELUX, DILUX, Advanced Design System (Agilent Tech.),C and Data Structures, HFSS, PLC, Ms-office, Ms-Excel, Power point, Windows 8.1, 7, Vista 2000/XP, Linux.

Personal Profile:

Marital Status : Married.

Date of Birth : 10-04-1981

Nationality : Indian.

IQAMA : Transferable.

Languages Known : English, Urdu, Hindi, Telugu. Arabic and Swedish (Basics).

Activities : Reading, Surfing, Travelling, Swimming.

(Mohammad Afzal Hussain).

Contact this candidate