Resume

Sign in

Manager Civil Engineering

Location:
Posted:
March 14, 2020

Contact this candidate

Resume:

RESUMÉ

ARIEL L. SANDOY

Add: ****** Copperpond Common SE, Calgary AB T2Z5B6

Mobile #: +403-***-****

Email: adcagu@r.postjobfree.com/ adcagu@r.postjobfree.com

EDUCATION ATTAINMENT:

OF COLLEGE

School: Western Institute of Technology

Degree Holder: Bachelor of Science in Civil Engineering

1999~2006

High School

School: Iloilo City National High School

1995~1999

PROFESSIONAL OBJECTIVES

To obtain a position in Civil/Structural Engineering, Quality Control and Assurance or related position utilizing successful experience and skills in Civil Engineering, Inspection and Building construction that can help to improve the company's profitability.

SUMMARY OF EXPERIENCE

More than Ten (10) years of work experience in a wide variety of Projects featuring Oil sand, Oil and Gas and Petrochemical Industries, Mining & Refinery, Infrastructure Projects, Piling Foundation, High-rise Buildings, Commercial & Residential Buildings and all kinds of Vertical and Horizontal Constructions. Skilled in all aspects of Civil Engineering, hands on Structural Design and Inspection, estimating and ordering of equipment and materials, coordination with direct consultant and staff in local project and abroad.

Familiar with English and Metric measurements, International codes of standards E.g.,, CSA, ACI, ASTM, AISC, AASHTO, AWS, SASO and QA requirements conformances to the ISO 9001 procedures.

Specialties:

Adept in interpretation of Construction Drawings and Plans, Construction Supervision and Inspection of the Project, Structural and Architectural Analysis. Quality Control and Assurance, Cost and Value Engineering, Evaluation of Project Schedule and Proficient in Technical writing.

Computer Literate (MS Word / Excel / MS Project / knowledge in auto cad) and I have also

Knowledge in Safety Practices.

EMPLOYMENT HISTORY

1.0

Company : Metropolis Facades Inc.

Address : Calgary Alberta, Canada

Position : Lead Fabrication and Quality Control

Date : July 2018 to Present

DUTIES AND RESPONSIBILITIES

•Overseeing the project plan to ensure all parties are supporting the delivery plans to site project

•Create and follow-up on work orders

•Ensure all finish product inspected and met quality standards

•Maintains a clean, safe work area in compliance and performs all work in accordance with established safety procedures

2.0

Company : WEN Qatar W.L.L

Address : Doha Qatar

Position : SR. QA/QC Civil Inspector

Date : February 2016 to October 2016

Project involve- Hilton Hotel And Resort Mega Project

DUTIES AND RESPONSIBILITIES

•Review the material technical data sheet prior to submit to the consultant.

•Review and develop method statement prior to submit to the consultant

•Attend all necessary inspections and testing’s as identified in the approved inspection and Test Plan (ITP).

•Prepare non-conformance reports (NCR) when a process failure occurs and Preventive/Corrective Action Request reports (PCAR) to address the cause of identified repeat or systemic non-conformances to prevent their recurrence.

•Coordinate with the consultant representatives to ensure that inspections are carried out expediently.

•Submit inspection request prior for inspection as per ITP/QCS.

•Conduct regular surveillance as per site condition and approved drawing

•Continually carry out surveillance inspections on the project, recording and documenting any and all deviations.

•Review the calibration status of any test equipment being utilized on the project ensuring the equipment is within calibration prior to use.

•Maintain a good working relationship with the project team and consultant personnel.

•Maintain good record keeping of activities carried our and inspection reports, surveillance reports, etc. and submit to the Site QA/QC Manager.

•Prepare QA/QC report weekly and monthly

•Assist construction activity to avoid rejection before inspection

•Aware the safe work practices.

3.0

Company : Ames Construction

Address : Regina Saskatchewan, Canada

Position : QA/QC SPECIALIST

Date : August 2015 to October 2015

Project involve- K+S potash Canada, Legacy Project

DUTIES AND RESPONSIBILITIES

•Conduct preparatory meetings in advance of scheduled sub- contractor work tasks to ensure requirements are understood.

•Attend all necessary inspections and testing’s as identified in the approved inspection and Test Plan (ITP).

•Inspect the production quality to establish if the client requirements are being achieved.

•Shall perform a variety of inspection functions under supervision.

•Record and document any and all deviations from the Project Quality Program and Integrated Management System (IMS).

•Update the exceptions items list with any and all deviations from the Project Quality Program and the IMS.

•Prepare non-conformance reports (NCR) when a process failure occurs and Preventive/Corrective Action Request reports (PCAR) to address the cause of identified repeat or systemic non-conformances to prevent their recurrence.

•Coordinate with the client representatives to ensure that inspections are carried out expediently.

•Carry out inspections on Exception Items as documented in the exceptions items list and sign off as closed when activity is approved and complete.

•Continually carry out surveillance inspections on the project, recording and documenting any and all deviations form the Project Quality Program and the IMS.

•Review the calibration status of any test equipment being utilized on the project ensuring the equipment is within calibration prior to use.

•Provide support to the construction personnel in relation to the Project Quality Program and the IMS.

•Maintain a good working relationship with all AMES and Client personnel.

•Maintain good record keeping of activities carried our and inspection reports, surveillance reports, etc. and submit to the Site QA/QC Manager.

•Utilize where possible more efficient methods of communication/travel to maximize the cost effectiveness in an effort to minimize departmental expenditure

•Maintain willingness to learn and support the Inspector providing the on the job training.

•Promote the safe work practices.

•Any other additional duties as assigned from time to time.

4.0

Company : Site Energy

Address : Fort Mcmurray, ALBERTA CANADA

Position : QA/QC Civil inspector

Date : October 2014 to December 2014

Project involve- JACOS hanging stone expansion Project

Duties and Responsibilities

•Review the scope of work, specifications, and client procedures, applicable code for each project.

•Conduct inspection and initiate the RFI as per requested by the construction manager for the release and to proceed the next stage of work.

•Issued and closed NCR for deficiency of work.

•Evaluate and recommended on the work have a deficiency issued as per condition versus on the approved drawings for construction

•Inspect as per ITP, review applicable Civil procedure specifications together with client QA representative.

•Perform receiving inspection and review of material test reports(MTRs) of each job and enter into the material receiving log.

•Carryout visual, dimensional inspections and generate reports in compliance with specifications.

•Receiving phone calls from clients and answering accordingly.

•Filing the QA/QC documents in specific folders.

5.0

Company : Canadian Natural Resources Limited (CNRL)

Address : Fort Mackay, Alberta Canada

Position : Civil Coordinator

Date : July 2013 to July 2014

Project Involve - Downstream Upgrading Project (Phase 3 & 4 HSU, DRU, VDU)

Duties and Responsibilities

•Responsible to supervised and monitor the contractor activity as per CNRL Standards

•Monitor and Coordinate contractor work completion schedule

•Review contractor construction execution plans, work scopes, schedule and manpower loading, construction work plan and field installation work packages

•Responsible to issue work permit to EPC contractor as per specific activities

•Direct involve for the project operation in regards to the implementation of workmanship for the construction methodology

•Conduct weekly construction and safety involvement meeting

•Monitor contractor safety and quality compliances

•Monitor contractor and construction compliance to CNRL site specific and Occupational Health and Safety (OH&S) procedures

•Verify construction progress and scope changes to the construction Manager and Project Manager and Project controls

•Prepare and submit daily progress report

•Review Job hazard analysis and Method statement as-per CNRL Standards

•Conduct daily inspection in work site

•Proper safety implementation as per CNRL standards

•Attend contractor safety meeting and tool box talks

•Identify areas were corrective action is required, identify deficiencies and coordinate rework to ensure schedule, specifications, procedures, company objectives and construction management best practices and adhere to

•Work with the construction manager and contractors to avoid and mitigate all significant risks and assist with contingency plan for other risks which cannot be effectively mitigated

6.0

Company : Worley Parsons Cord

Clients : Nexen Oil Sand

Address : Anzac Fort Mcmurray, Alberta Canada

Position : QA/QC Civil Coordinator

Date : May to July 2013

Project Involve- Nexen kinoses oil sand, SAGD Project

Duties and Responsibilities

•Implement the QA/QC Program and Standard Base in Clients Specifications

•Monitor the Daily Activity to Avoid Rework

•Prepare the inspection Notification to Submitted to the Clients QA for joint Inspection

•Coordinate to the Construction Manager on all Quality Issues and activity

•Maintain the Record in place

Concrete Activity

•Review Plan and specification and approved concrete Mix design, Review the reference codes and standard, verify that the strength and class of concrete that being delivered conforms to specification and drawings.

•Inspect the install rebar in every classification of size and diameter, spacing. Check whether placed at correct course laps as specified, lintel bars over bars over openings, hooks, ties in pliers.

•Check moisture condition of masonry units; verify job mix mortar Proportion of cements, Aggregates and admixtures Consistency, workability and mixing time.

•Observe and verify placement procedures for evidence of segregation, possible cold joints, and displacement of reinforcing forms, and proper support of embedded items and anchor bolts

•Verify the Survey report for the anchor bolts if correct in as-per design location.

•Perform inspection and testing or witnessing the inspection and testing by our third party as per approved test plan, including the release of company nominated hold points.

•Prepare records of inspection/tests and making available records to the Quality department.

7.0

Clients : SAUDI ARABIAN MINING COMPANY (MAADEN) / ALCOA

Consultant : FLUOR – PMC (Project Management Consultancy)

Address : RAS AZ ZAWR, KINGDOM OF SAUDI ARABIA

Position : QA/QC Civil Inspector

Date : November, 2010 to November, 2011 (12 months)

Project Involve- MAADEN Aluminum Smelter Project

•Assign in Construction of Roads, Pads, Culvert, Perimeter Fence, Ware house as Moffareh m. A-lharbi General Construction under the clients MA’ADEN/ALCOA: Consultant FLUOR Arabia (PMC).

Duties and Responsibilities

•Implement the QA/QC Standards base on the Clients Specification

•Prepare and inspection request submitted to the client’s QA/QC for joint Quality standard inspection as the bases of Contract Specification

•Prepare daily logs and reports. Maintain records of inspections made, tests performed, work executed, etc.

•Perform all work in accordance with the Contract Administration Procedures Manual.

•Conducted in the site internal and site audits

•Monitor the implementation of the approved site QC Plan. Coordinate with the site construction manager on all quality issues Coordinate and chair the QA/QC site weekly meetings with the projects Clients and consultants QA/QC personnel. Elaborating inspection and test programs assure all technical documents relative to site quality control are current status.

•Observe site safety practices and the progress of the work. Report any concerns to the Project Quality Manager or Project Manager

Concrete/ Re-bars Inspection

•Review Plan and specification and approved concrete mix designs. Review applicable sections of reference codes and standards, Verify that the strength class of concrete being delivered conforms to specifications and drawings

•Verify Reinforcing materials are in acceptable condition, size and spacing of reinforcing dowels. Verify that foundation concrete is clean and prepared as required by specifications

•Check moisture condition of masonry units. Verify job-mix mortar proportioning of Cements, Aggregates and admixtures for consistency, workability and mixing time

•Inspect horizontal reinforcing steel placement. Check whether placed at correct course, with laps as specified, lintel bars over bars over openings, hooks, ties in piers, diameter of bars, spacing and fasting

•Observe and verify placement procedures for evidence of segregation, possible cold joints, and displacement of reinforcing forms, and proper support of embedded items and anchor bolts

•Perform inspection and testing or witnessing the inspection and testing by our third party as per approved test plan, including the release of company nominated hold points. Prepare records of inspection/tests and making these available to the QA/QC department.

•Verify corrective action is taken when non-conformance work is identified and assist in preparation of (ITP) perform slump test for concrete.

Project Accomplished

7.1

Client : SAUDI ARAMCO / JGC- JAPAN GAS COMPANY

Address : MANIFA RAZ AZ ZAWR, KINGDOM OF SAUDI ARABIA

Position : QA /QC CIVIL INSPECTOR

Date : August, 2010 to November, 2010 (4 months)

Project Involve- ARAMCO / GJC Manifa causeway project

•Assign in Construction of 54 KM Right of Way AND WATER PIPE LINE Project as Moffareh m. Al-harbi General Construction Under the clients ARAMCO & JGC ARABIA – JAPAN GAS COMPANY

Duties and Responsibilities

•Implement the QA/QC Program and Standard Base in Clients Specifications

•Monitor the Daily Activity to Avoid Rework

•Prepare the inspection Notification to Submitted to the Clients QA for joint Inspection

•Coordinate to the Construction Manager on all Quality Issues and activity

•Maintain the Record in place

Project Accomplished

7.2

Client : SAUDI ARABIAN MINING COMPANY (MAADEN)

Consultant : Worley Parson – PMC (Project Management Consultancy)

Address : RAS AZ ZAWR, KINGDOM OF SAUDI ARABIA

Position : QA/QC CIVIL INSPECTOR

Date : August, 2009 to July, 2010 (11 months)

Project Involve- MAADEN Infrastructure, Aluminum Smelter and Phosphate project

•Infrastructure e.g., 34.5 KV Power Distribution System (2 Unit), Road networks, Traffic Lights, 28 KM Street Lighting, Electrical Substations, Overhead and Underground Transmission lines, Underground storm drainages Project as Moffareh M. Al-harbi General Construction under the client SAUDI ARABIAN MINING COMANY (MA’ADEN), WORLEY PARSON – PMC (Project Management Consultancy) construction of Infrastructures, Phosphate Chemical Stock Yard and Drainage System.

Duties and Responsibilities

•Direct involvement in the preparation and implementation of the project QMS (quality management system)

•Inspect site conditions prior to start of construction activities. Verify the compatibility of the site with the designed permanent works. Check for obstructions. Photograph and document the condition of existing property that might be damaged by the work.

•Prepare and inspection request submitted to the client’s QA/QC for joint Quality standard inspection as the bases of Contract Specification

•Receipt and Tracing of all Deliverables materials on receiving area or lay down by the EPC and Ensure material delivered is inspected for conformance to specifications.

•Prepare daily logs and reports. Maintain records of inspections made, tests performed, work executed, etc. Perform all work in accordance with the Contract Administration Procedures Manual

•Checked the equipment and materials ordered, tracking vendor’s progress and prepare regular reports.

•Conducted in the site internal and site audits

•Resolve all nonconformance & Corrective Action report and undertake remedial action.

•Monitor the implementation of the approved site QC Plan. Coordinate with the site construction manager on all quality issues Coordinate and chair the QA/QC site weekly meetings with the projects Clients and consultants QA/QC personnel. Elaborating inspection and test programs. Assure all technical documents relative to site quality control are current status.

•Monitor the disposition of all issued nonconformance reports, Monitor the progress and project quality management system. Coordinate all QA/QC activities to QA/QC manager.

•Witnessing and sentencing of all site inspections within their discipline

•Review and closeout all QA/QC final Punch list, ITP documents completion and comments such as (Structural installation and components) touchup procedure, galvanizing, coating, installation all necessary

•Documents required, review and close out of completed dossier, and job completely installed prior for

•Hand over based on Contract agreement.

CONCRETE/REBARS INSPECTION

•Review Plan and specification and approved concrete mix designs. Review applicable sections of reference codes and standards, Verify that the strength class of concrete being delivered conforms to specifications and drawings

•Verify reinforcing materials are in acceptable condition, size and spacing of reinforcing dowels, Verify that foundation concrete is clean and prepared as required by specifications

•Check moisture condition of masonry units. Verify job-mix mortar proportioning of Cements, Aggregates and admixtures for consistency, workability and mixing time

•Check the ready mixed mortar for type for conformance to specified requirements

•Inspect horizontal reinforcing steel placement. Check whether placed at correct course, with laps as specified, lintel bars over bars over openings, hooks, ties in piers, diameter of bars, spacing and fasting

•Observe and verify placement procedures for evidence of segregation, possible cold joints, and displacement of reinforcing forms, and proper support of embedded items and anchor bolts

•Perform inspection and testing or witnessing the inspection and testing by our third party as per approved test plan, including the release of company nominated hold points. Prepare records of inspection/tests and making these available to the QA/QC department.

•Ensure and verify corrective action is taken when non-conformance work is identified and assist in preparation of (ITP) perform slump test for concrete

•Project supervision of work phases as per specified plan and project specification. Monitor progress of work in accordance to the given time table on project planning schedule

•Prepare accomplishment report, preparing & updating Materials take-off from drawing and compare to site in actual

8.0

Company : Ramah Aluminum & Metal Coating Factory co.

Address : P. O Box.40753 Riyadh 11511 KSA.

Position : QA/QC CIVIL Inspector-Structural and Installation

Date : September, 2007 to March, 2009

Project Involve

•Assign in Construction and Installation of Aluminum and Glass Project as Ramah Aluminum & Coating LTD under Foton Center Bldg. Project.

Duties and Responsibilities

•Perform Quality Assurance and Quality Control Activities as Inspector

•Report the findings to the Quality Manager

•Prepare and conduct inspection on materials received on site if it is in compliance with clients or manufacturer standards and procedure

•Conduct inspection on sites ready for any Activities before the client’s Requirements and Standards

•Compile and process all statistical records and reports in respect of quality Control files

•Prepare the inspection request submitted to the client’s representative for Joint Quality Standards inspection as the bases of Contracts specification

•Provide and implement proper surveillance for non-Conformance Report and Corrective Action Report internal and external

•Perform Dimensional Inspection of Frame as per Design

•Checking the Actual Thickness of glass at the Site as Per Approve Drawing and Requirements Specifications

•Documentation and Project procedures review.

•Implement the (ITP) Inspection test plan

•Perform visual and dimensional check, confirm compliance to inspection specification

•Visual inspection of Proper installation at site.

•Review the Qualified man power for installation in proper Procedures

•Inspection of Delivery equipment at Proper Handling of Materials

•QC reporting (weekly and monthly status)

•QC meeting with the clients

•Technical Reviews. / Documents /QA Compiling System Procedures as Per Clients Requirements

•Good interpersonal and communication skills.

9.0

Company : Saudi Turf Co., LTD

Address : P. O Box.40755 Riyadh11511 K.S.A

Position : Civil QA/QC Inspector

Date : January, 2007 to September, 2007

Duties and Responsibilities

•Review plan, specification and standards as per approved design from the client Inspection and review the qualified man power for Sub-contractor

•Perform & Supervise site Preparation in a proper procedure base in approved drawing

•Monitor the manpower to perform base on Approved Drawing and design

•Follow up and inspection the materials delivery in a proper handling

•Prepare the punch list prior for preparation for handing over based on contract agreement.

•Comply all company statements, requirements and implementing safety in my area of responsibility

10.0

Company : Nikkei Builders

Address : Fundidor Molo, Iloilo City Philippines

Position : Civil Site Engineer

Date : May, 2006 to December, 2006

Duties and Responsibilities

•Project supervision of work as per Drawing and Standard Requirements.

•Monitor progress of work as per Planning Schedule

•Checking the delivery materials from the supplier as per Required Materials and standards.

•Review drawing and program of work for propose construction and rehabilitation of project, attend regular and special construction meeting and other meeting, which required by the Management.

•Prepare accomplishment report. Preparing and updating materials take-off from drawing and compare to site installation or progress works.

•Site measurement for civil, mechanical works. Prepare monthly progress report for billing purposes. Secured field data for making as-built

•Drawing & some Sketches for back-up of progress invoice.

•Perform the inspection plan location for testing purposes

•Perform & supervise site preparation/ Excavation for Foundation, Reinforce Concrete and Steel Structural works.

AFFILIATION

OSHA-Occupational Safety and Health Administration

HYPERLINK "http://www.OSHA.gov" www.OSHA.gov

Member No. 34-600******

April, 2011

TRAINING AND SEMINAR

Nuclear Gauge in Safety Training

Troxler Electronic Laboratories, Inc.

August 2015

OSSA Safe Work Permits

(Canadian Natural Resources Limited)

July 29, 2013

Construction Safety Training System CSTS-09''

(Alberta construction safety association)

May 16, 2013

OSHA Construction Outreach Training Program

Al-Jubail Kingdom of Saudi Arabia

Certificate No. 2011-0315

(www.safetyandhealthinternational.co)

April, 2011

Trenching and Shoring Competent Person Training

FlUOR Arabia International Company

April, 2011

Hydrogen Sulfide Seminar

ARAMCO/JGC by: Sunbelt H2S Fire Safety Services

July, 2010

Gas Welding

Tesda Iloilo city, Philippines

July, 2009

Auto cad Training

Interface Computer College, Philippines

April, 2008

PERSONAL BACKGROUND

Gender : Male

Citizenship : Filipino

Height : 5' 10''

Weight : 150 lbs.

Dialect I can speak and Write : Filipino and English

Birth Date : Jan. 11, 1982

References: Available upon request

I hereby certify that the above statements are true and correct to the best of my knowledge and describe my qualifications, my experience and myself.

ARIEL L. SANDOY

Signature (Applicant)



Contact this candidate