Sign in

Engineer Electrical

Pune, Maharashtra, India
May 17, 2020

Contact this candidate



Name : Satish Dixit

Nationality : Indian

Qualifications : Diploma in Electrical Engineering from Board of Tech education

Maharashtra state

: Bachelor Degree-BTech. in Electronics &Telecommunication

Engineering - Rajasthan University

Passport details : Z5122003 Vaild till 12/3/2029

Total Experience :30 Years

Oil &Gas experience : 20 Yrs.

Languages : English - Hindi – Marathi

Date of Birth : August 4, 1963

Status : Married

Home address : 401 Runwal Sadhana

Paud Road, Kothrud, Pune, 411038, Maharashtra,India

Telephone : +91-982******* /832-***-****

Email :

Professional Studies : Advance Industrial Electronics course by University of Pune

Basic Industrial Electronics course by University of Pune


Certification : Lead Auditor course for ISO9001-2000 conducted by BVQI Mumbai

Certified OSHAS 18001:1999 Course Completed

Vesda (Vision systems) Australia certified course for Smoke

Detection system

Honeywell Experion C 200 PLC training course.

Honeywell Fail safe controller (FSC) training course.


PMI Certified Project Management Course


Project Engineer-manager. Lead Engineering activities with Exposure to all other disciplines such as process,piping,structural,E&I..

Hookup Commissioning Engineer.

E&I,Control system Engineer – Consultant

Operation & maintenance Engineer.

Self reliant, reliable self starter, work independently

Supervisory skills &motivate good team work.

Team leader,good English communication & reporting skills

Knowledge on HSE,permit to work procedures for EPC offshore/onshore projects

Initiate FEED & Conceptual study& detail Engineering activities for the project.

Design, Detail Engg.of Electrical, Instrumentation & Control systems.

Knowledge of ISA,API,ANSI & relevant standards.

Preparing Project Quality Plan, ITPs, Quality Inspection

Wide knowledge of control and process instrumentation &Automation.

Conduct feasibility study & Conceptual Design, participate Site survey.

Project Management & coordination with vendor & Client to complete the Project in time.Manage the Engineering Budget,cost & Resources.

Focal point for the Engineering delieverable & assets.

Support to the QMS system &International standards relevant to development projects.

Ensure cost effectiveness in Enginering & Manhours & act for suitable measures.

Experience in risk and hazardous operations analysis

Participate in HAZOP & HAZID study& provides inputs to project department

Design&DetailEngineering for Electrical Instrumentation.

Provide inputs for P &ID, PFD,cause & effect charts, control philosophy,operation,shutdown,maintenance procedures.

Develop Tender package, which includes scope of work, data sheets & other prebid Engineering documents for E&I

Required Engineering calculation to support the basic design phase

Project Planning & Timely Completion of the Project,Manage project engg. Schedule

& delieverables as per Client requirements(DCI & MCI)

Report Project progress & Review Change orders .

Coordination with all the disciplines,client &various vendors to complete the Project in Time.

Estimation of E&I for Project tenders of Oil & Gas Projects.

Internal coordination with various departments/disciplines to execute the project.

Experienced in quality control requirements and quality assurance for engineering work

Leadership quality to lead a team & motivate them for Project control &execution.

Inspection of E&I for oil &Gas projects Preparation of QA plans

Construction of E&I work, operation & maintenance in Refinery Projects.

Knowledge on Boiler safety Interlocks

Knowledge on Foundation field bus

Familiar about INTOOLS,FLOWCAL etc. software

Experience to Review 3D Models in I&C Installation design

Experience in Gas compressor,GE Gas Turbine Instrumentation & Control

Experience to Review Smart Plant Instrumentation(InTools)

Participate SIL STUDY,Review,Implementation

Review of ESD Philosophy,Control philosophy

Knowledge and experience of ISO 9001 implementation with Quality Management system of ISO9001-2000

Develop Data sheets & selection of Instruments as per project requirements

Development of project schedules and manpower requirements as per the project requirement

Prepare instrumentation calculations for control valves, orifices, and safety relief valves etc as per project requirements.

Working knowledge of ISA Standards and International Code

Develop Effective working & Relationship building, motivation

Design & Detail Engg.Experience with all reputed DCS- PLC Mfgr such as ((Siemens,Honeywell,Rockwell-Allen bradley,Mitsubishi etc.

Design,Detail Engineering,Installation & commissioning of Gas Turbine Instrumentation & Automation.


Extensive international experience in Electrical, Field Instrumentation, DCS-ESD-F&G SCADA system. Field bus systems, Project management & Estimation, Design, Detail Engg, FEED QA/QC & Inspection,procurement coordination,Installation, Commissioning, operation & maintenance for Onshore/Offshore EPC Oil & Gas,Petrochemical, Refinery Projects

Particular experience in the development of major deliverables as per the Project specifications and implementation of management information systems, internal control systems and procedures, project management procedures and related information and logistics systems.

Experience in contracting out and control of all major project phases from contracting strategies, pre-qualification programmes, tender document preparation, contract negotiation, award and administration to post contract and claims analysis.

Exposure to coordinate with other disciplines Process,piping,structural,E&I.Mechanical.


Since 2019 working as Consultant for various Oil & Gas project companies in India

And Abroad.


Jan 2014-2018 as Lead Automation Advisor to Pertamina Indonesia jakarta for

Terminal Automation projects & developing as Centre of Excellence deparment.

Setting up Centre of Excellence Team for Oil Company as central Technical department .

Design of standards & principles for Terminal Automation suitable for Oil depots.

Site survey/Dignostic for the current condition of Oil depots.

Advise to Oil depots for Detail Engg. planning,procurement & execution of TerminalAutomation,for DCS,PLC Automation.

Advisor to Oil company management as Expertise for Automation.

Lead to solve problems in Automation for terminal depots to reduce the production losses.

Consultant to various industries in India

2013-2014 –Project Engineering. Manager –Control&Instrumentation for Foster wheeler India Ltd. For Engineering & Project Management.(MPMC)

For IOCL Paradip-Orissa, India Grass Root Refinery Project. Responsible for

Integrated Control system of Honeywell

Leading C&I team for Detail Engineering of EPCM1 for Electrical, Instrumentation

Guidance & coordination with the team & other 7 EPCM companies for Instrument & Control system document deliverable,querry resolution, Control system Engg. Completion.

MPMC Lead for all EPCMs for Engg. As well as execution of the Project.

Interaction with client to resolve Engg. Queries & deliverables

Organise meeting with LSTKs to Clear Instrumentation Control system queries & get the deliverable.

Organise & Attend FAT of Instrument & Control system& resolve Punch points

Despatches of Instrument & Control system

To maintain modpack register for the Punch points after FAT of DCS-ESD-F&G system.

Approval on Control system Architecture after resolving Client querries

Prepare & Approve Functional Design Specifications.

Prepare & Approve All Instrument & control system deliverables.

Attend & Review all Project Review meetings with Client & submit progress, issues etc.

Attend & Review meetings with all EPCMs /LSTK contractors for progress with them .

Review and approve PMC and EPC scope of work related to I&E elements.

Establish all I&E engineering and operational requirements during the conceptual design, FEED and detailed design.

Responsible for reviewing of P&IDs along with process team and understand logic diagrams for DCS and ESD

Review the design calculations of SLD and I&E equipment and ensure the design documents are prepared in line with standards specified using design software and drawing tools.

Review control system design, instrument installation details, schematics, network diagrams, cable schedule .

Review of vendor documents for safety and integrity of engineering design and operation.

Ensure Development of procedures, policies, standards and guidelines to improve the reliability of the equipment.

Participation for design reviews approval of HAZOP study SILsessions for new projects.

ProvideinputsforP&ID,PFD,cause&effectCharts,Controlphilosophy,operation,shutdown,maintenance procedures.

Provide Technical support to projects department for Electrical/Instrumentation aspects of new plant design,commissioning,operability,maintainability.

Review and approve commissioning procedures, operating procedures and training manuals related to operation team.

Operation & maintenance procedures for E&I

Complies with all relevant safety, quality, health and environmental procedures.

Mentoring and development of young engineers & trainees.

Report project Progress report & review Change orders.

Review of Work Breakdown Structure, Bar chart Schedule, S-Curve, Manpower Histograms and Resource Allocation.

Guiding Lead Project Engineer and Lead System Engineer on technical and other Project related issues.

Review of Project Purchase Order Requests.

Coordination with vendors and subcontractors for technical and other issues for meeting the delivery schedule.

Preparation and review of Project Monthly Progress Report.

Attending the Customer Project Progress review meeting.

Project Progress Monitoring & Reporting. Project Costing and Co-ordination.

Preparation of Project Budget and Cost Control System. Arrangement of Resources.

Coordination with Customer Project Manager/Engineers for Commercial and technical issues.

Review and approval of Scope of Work deviations.

Prioritization of Project team activities based on customer and Management requirements.

Compilation and submission of Change Orders / Waivers / Concessions.

Preparation of Project Summary, Risk Register and updating on regular basis.


Senior Manager – Instrumentation & Control systems/Lead Engineer- Instrumentation - for Various Offshore(Green field +Brownfield) Projects as below

ONGC offshore process platform project-ICPR

Marks Oil Qatar Project for Al shaheen field Development of ED,GD and GA platform

ADMA-OPCO GPF process platform project

ZAKUM-ZADCO-MOSAICS-Modernisation of SCADA and Instrument Control system.

Cairn Energy Ltd.Gauri & Laxmi Platform project.

Responsible for Design, Detail Engg.of Electrical Instrumentation, DCS-ESD and F&G system for ONGC ICPR offshore Process platform Project EPC Contractor-Afcons-Gunanusa JV,Engg.Consultant: with Aker Engineering Malaysia.

Review and approve package vendor deliverables and identify & complete interface engineering

Preparation of Instrument Index as per Project scope &Selection of Instruments as per P&ID

Develop Tender package, which includes scope of work, data sheets & other prebid Engineering documents for E&I, Required Engineering calculation to support the basic design phase.

Participate in Site surveys of existing platform for brownfield,interphase requirements, facilities etc..

Preparation of RFQ for Electrical, Instrumentation and DCS-ESD-F&G system, Telemetry system, Multiphase Flow meters,Field Instruments like PG,TG,ControlValves, safety valves, well head Control Panels,F&G devices etc.

Preparation of RFQ for Telecommunication Equipment and design, detail Engg. of CCTV,PAGASystem, Telephone system, Weather monitoring system, Radio system.

Sizing of Control valves, Flow Elements,safety valves as per the Process data.

Design, Detail Engg. of Electrical, Instrumentation & submit deliverables as per project requirement.

Design, Detail Engg. Of LV/MV/HV switchgear, Lighting Design Calculations & Interface requirements.

Familiar with Gas Turbine synchronisation, Hook up Interface with existing HV system at Platform.

Familiar with VFD system, substation automation equipment, Differential protection & other Electrical protection systems implemented at offshore site.

Review of P&ID and Implement Control loop diagrams.

Preparation of Control narrative & Functional logic diagrams for various Mechanical Packages.

Technical Bid evaluation between various vendors for DCS-ESD-F&Gsystem & Field Instrumentation.

Provide inputs for Quality Plan, Quality Inspection to ensure that work is carried out as per specifications

& tender requirements with Client company standards.

Responsible for Deliverables such as DCS-ESD and F&G System Architecture drawing, I/O list, Logic diagrams, Hook up diagrams, Purchase specification of DCS-ESD-F&G system and Field Instruments, F&G layouts, Instrument layouts, wiring diagrams, Graphic philosophy,F&G Graphics,HMI layouts for various plants.etc.

Lead & participate in all E&I related activities to support offshore for precommissioning,commissioning of DCS-ESD –F&G system Hookup & commissioning with process plant package Instrumentation at ICPR platform. If required visit offshore platform for fine setting, tuning them at site.

FAT & SAT of Honeywell DCS-ESD-F&G system for ICPR offshore process platform.

Preparation of Hook up & Commissioning procedures for the Process platform.

Design Detail Engg. of Instrumentation,DCS-ESD-F&G system for Merks Oil Qatar offshore platforms.

FAT & SAT of Siemens S-7 DCS-ESD and F&G system for Merks Oil Qatar offshore project.

Preparation of commissioning procedures for various packages for Merks Oil Qatar offshore process platform ED,GD & GA thru NPCC

Design Detail engg. for MOSAICS-(Modernisation of SCADA & Instrument Control system)of ZADCO offshore project with Honeywell ME & CAE JV

Project Planning, Manpower planning & Complete execution of MOSAICS ZADCO offshore project..

Knowledge of In tools & flow calculation/Control valve sizing software.

6.6.KV HV system Single line diagrams & HV switchgear Engineering,

Operation & Maintenance procedures for E&I Packages

Gas Turbine synchronisation. Differential cable protection

Involved in HAZOP & HAZID study .

SIL Verification/SIL assessment Studies involved.

Bid evaluation, Pre Bid engineering of Electrical Instrumentation for offshore Project tenders.

Gas Turbine Instrumentation & Automation.



Responsible for the Design Detail Engg.planning and control for the execution of Refinery, Petrochemicals & offshore projects During theDesign,Detail Engg Phase responsible for

Design deliverables of all system Engg. such as I/O list, System Architecture, Cause & effect diagrams for ESD & F&G system, Logic diagrams, Loop diagrams, Instrument Hookup diagrams, Cable schedules etc and during execution phase of involved in all project management related functions, including estimating, planning and scheduling, risk analysis, project handover.

Design, Detail Engg,Execution of Terminal Automation project for BPCL,IOCL&HPCL

Design Detail Engg and commissioning of Offshore process Platform-Gauri &Laxmi for Cairn Energy Ltd.Hazira

Design,Detail Engg. and execution of Refinery Automation project of BPCL&HPCL

Service/maintenance Contract management, procedures writing for process plants.

2001 – 2004

QA & Inspection Engineer - Larsen &Toubro Ltd for MNW offshore Process Platform Project of ONGC.

Detail Engineering, Review of Project specifications & Project drawings.

Preparation of Quality Assurance Plan for all Instrumentation & Electrical,DCS-ESD-F&G system, FAT and SAT procedures review,

Witness of Calibration of field Instruments, Review of Test Certificates of Calibration Equipments Review of specifications and Detail Engg. drawings for Electrical & Instrumentation

Senior Inspection & QA Engineer- Assignment to Bureau VERITAS Mumbai for MNW offshore project

Review & functional design specification of DCS-ESD and F&G system.

Review & Inspection of the specifications of all field Instruments, HV, LV switchgears,MCC, PCC, power cables, Instrument cables, Fibreoptic cable specs., Lighting Luminaries, Lighting systems, Review of Test certificates of all Instrumentation & Electricals.

Senior Engineer- Assignment to Vincotte LLC Oman for PDO project of 48 inch Export Gas line Project.

Ensure instrument &Electrical equipment,cathodic protection works complied with project specifications, company procedures, method statements and quality assurance and controls documentation (strictly implementing ISO 9001-2000)

Monitoring the flow of inspection on-site and calibration prior to meet the project deadlineTasks to monitor all subcontractor activity prior to start of Instrumentation, Electrical& CP

Ensure Installation&commissioningas per drawings& witness of testsforHV/LV switchgears,HV/LV Motors, transformers

Ensure Maintenance spares procurement for all Electrical & Instrumentation.



Project: Condensate fractionate unit II Client: ONGC –Uran –Navi Mumbai

Company: Larsen &Toubro Ltd. Powai


Execution of Electrical &Instrumentation including DCS and PLC system. Honeywell TDC 3000.Electrical Motors,MCCs,PCCs,Junction boxes, Lighting Cable laying &termination to electrical equipments. Installation and commissioning, field Instrumentation

Review of Design, Detail of Electrical &Instrumentation work

Hookup,Calibration, testing, loop checking,precommissioning & Commissioning of

Field instruments such as Rosemount transmitters, Rosemount Micro-motion Mass flow meters, control valves, Yokogawa Digital controllers,Recorders,,General Monitors H2S/LEL Gas detection systems,H2S Gas Analysers, Flow/pressure transmitters, Magnetic flowmeters.Pressure,flow,Level switches, Displacer type level switches, Displacer level transmitters.

Day to Day scheduling the work for contractor & monitoring the progress

Coordination with contractors & client for progress of work

Review of Design, Detail of Electrical &Instrumentation work

Calibration witness of all the Instruments before Installation

As built drawings for Instrumentation & Electrical work.

Operation & maintenance procedures for Plants.

Troubleshooting of Instrumentation during operation of the plant

Project: Ratawi-Burgan Automatic control custody transfer unit


Client- Joint operation, wafra(SA Texaco+ Kuwait Oil Co.) Kuwait.

Company: International Inspection centre(Intrex) Kuwait


Detail Engg. Of Electrical & Instrumentation as per the Project requirements.

Site construction Inspection of contractor for Electrical & Instrumentation.

For FMC Measurement systems USA make skid.

Ensure and monitoring the flow of inspection &E&Iconstruction work on-site and calibration prior to meet the project deadline

Assigned to witnessing Installation and calibration of instrumentation, commissioning of the following equipment: Smart Flow, pressure, temperature, level transmitters, Flowmeters,Bulkmeters,control valves, pressure gauges, PLC &Data acquisition system

FAT &SAT of DCS-ESD and F&G system as per specifications &FAT,SAT procedure.

Verification of test certificates for Electrical &Instruments of metering skid.

Client: Petrochemical Industries co.(PIC)Kuwait

Project: Technimont/Kharafi national-UREA plant up gradation

Company: International Inspection centre(Intrex) Kuwait


Design, Detail Enggof E&I. drawings of review of the Proposed Project.

Site construction Inspection of Electrical, Instrumentation for calibration &Installation

Control room Instrumentation, FOXBORO DCS Installation

precommissioning of the plant with loop checking &all other Instrument Tests

QA/QC,Inspection of E&I Construction work.

Client: Qatar Petroleum co.Ltd. Qatar

Project: ERU Plant Revamping Shutdown work.

Company: SOS-Asahi Technicon co. Ltd.Qatar


Review of Design,Detail Engg.drawings of Electrical, Instrumentation,DCS-ESD- F&G system.

Nivo piogne Italian Gas compressor Electrical,Instrumentation revamping

Hookup on Honeywell TDC 3000 DCS, smart transmitters,Control Valves etc.

Replacement of control valves, Instrument tubing etc.

Calibration/Witness of Installed existing Instruments

Replacement of Flare Instruments&MIS cabling.

Bentley Nevada vibration system calibration.

Commissioning of Gas compressors .


Project: Rehabilitation of Gas cracker, Hydrogen, SRU, VDU plant

Client: Northern Refinery Co. Ltd., Baiji,Republic of Iraq

Company: Triune projects Pvt. Ltd. New Delhi

Manager-Inspection Instrumentation & Electrical.


Health check(Testing & Inspection) of existing Electrical,Instrumentation for Hydrogen plant, Gas cracker plant&VDU Plant.

Preparation of health check report for Electrical &Instrumentation equipments

Review of Existing Design,Detail Electrical &instrumentation thru chiyoda corpn. Japan

Preparation of list of damaged items .parts for rehabilitation of plant Instrumentation.

Support to the procurement dept.for getting new instruments, Preparation of specs.etc.

Calibration witness of existing Installed Instruments.

Installation of new instruments witness for functional tests, Precommissioning checks.

Gas turbine Instrumentation health Chek,Procurement of Instrumentation & Commisssioning of the same.

Project: ONGC Balol, ONGC Santhal,ONGC Bechraji,IPCL Nagothane

IFFCo Kalol, IGL Kashipur

Manager-Inspection Elect.& Inst.

Company: Triune Projects Pvt. Ltd. New Delhi


Review of Design, Detail Engg.of Electrical &Instrumentation drawings.

Vendor Inspection for Electrical &Instrumentation for above projects.

Site Inspection on Installation &commissioning of contractors work

For above projects.

Preparation of QA plans, Inspection reports

Review of Test certificates.

Expediting of site construction work at site & vendor material despatch.

Project: Automation of BOF &CCP Steel plant

Client : Jindal Vijaynagar steel Ltd.Bellary,Karnataka

Project Manager

Company: Tata Honeywell Ltd. Pune


Design, Detail Engg. of DCS System Engineering & Instrumentation,Electrical.

Responsible for steel plant process automation, commissioning of BOF & CCP plants

Honeywell PLC system Installation &Commissioning

Development of Logic &Interlocks on PLC

Installation &commissioning of Field Instruments like transmitters,control valves.

Finalisation of Graphics with client Engineer.

Coordination with vendors & client for commissioning of the plant.

Operation & maintenance procedures for Terminal Automation projects.

Allocation of Manpower, Engineer as per the site schedule

Preparation of day to day site schedule, monitor project progress.

Project: Ethylene storage Tank &Jetty

Client: IPCL Gandhar Dahej-Gujrat.

Mother well bridge projects (UK)Ltd-Joint venture with

India Tube Mills & Metal Industries Ltd. Mumbai

Sr. Instrument Engineer


Responsible for Installation &Commissioning of TDC 3000 Honeywell DCS-ESD-F&G system

Responsible for Installation &commissioning of Field Instrumentation&Electrical.

Coordination with client Engineers for completion of work

Coordination with Construction contractor to complete the construction work

Loop checking, Pre commissioning of Ethylene storage tank

Checks of Interlock, Logic check, Graphics check with Client Engineer.

Commissioning &handover to client

Project:Ethyelene storage tank

Client: Gas Authority of India Ltd-UPPC complex Pata

Company:Larsen &Toubro Ltd. Powai

Sr. Engineer-Elect.& Instrumentation


Responsible for Installation &Commissioning of Yokogawa centum DCS

PLC system, Fire & Gas Detection system,ESD system.

Responsible for Installation &commissioning of Field Instrumentation&Electrical.

Coordination with client Engineers for completion of work

Coordination with Construction contractor for Mechanical completion.

Loop checking, Pre commissioning of Ethylene storage tank

Checks of Interlock, Logic check, Graphics check with Client Engineer.

Commisioning &handover to client

Project: Condensate fractionate unit II

Client: ONGC Uran –Navi Mumbai

Company: Larsen &Toubro Ltd. Powai

Sr. Engineer Elect. &Inst.


Responsible for complete Electrical &Instrumentation including Honeywell TDC3000 DCS-ESD.

Electrical Motors, MCCs, PCCs,Junction boxes, Lighting fixtures,

Cable laying &termination to electrical equipments.

Installation and commissioning, field Instrumentation construction, cable tray layout, calibration, testing, loop checking and inspection work as per ISO 9000 Procedure

Field instruments Installation &commissioning of Rosemount transmitters, Rosemount Micro-motion Mass flowmeters, Masonelian control valves, Yokogawa Digital controllers,Recorders,Bells Electropnumatic converters, General Monitors H2S/LEL Gas detection systems,H2S Gas Analysers, Flow/pressure transmitters, Magnetic flow meters. Pressure,flow,Level switches, Displacer type level switches, Displacer level transmitters.

Day to Day scheduling the work for contractor & monitoring the progress

Coordination with contractors & client for progress of work

Review of Design, Detail of Electrical &Instrumentation work

Operation & maintenance procedures.

Calibration witness of all the Instruments before Installation

As built preparation of all Electrical &Instrument drawings.

Client: ONGC, IPCL, IOCL, HPCL,L&T, Thermax,Alfa-Laval

Company: Quest Inspection services Pvt. Ltd

Sr. Inspection Engineer-Elect. &Inst.


Vendor Site Inspection for Electrical & Instrumentation for above clients.

For various Oil & Gas project

Inspection of Electrical &Instrumentation equipments such as power Transformers,

Switchboard panels, LT/HT motors, DG sets, ESP panels-system, Power transducers, power

Inspection of Power Cables, XLPE Cables, Inst. Cables, cable Trays, perforated cable trays OFC cable, Inspection of Transmitters, Control Valves, Controllers, DCS systems, PLC system & all other .

NOV1988 –FEB1992

Company: Lectrotek systems (Pune) Pvt. Ltd

Projects Handled: Fermentation Automation at Alembic chemical works Baroda

Grain silo temperature monitoring system for M/s Thermax Ltd. & Shirke structurals

Lead Oxide Generation reaction Pot Plant for Chloride Industries ltd( Exide Batteries Ltd). Pune.

Project Engineer


Turnkey projects in Instrumentation &automation,Elctrical,Telecommunication

Design, Detail engg. Of process control Instrumentation,Electrical for Process industries projects

Preparation of Inst. Index., Specification sheets for instruments

Preparation of cable layout drawings,JB schedules, Hook up drawings

Preparation of Panel wiring drawings, Loop drawings,JB wiring

Preparation of In house instruments specifications

Subcontractor finalization,mobilisation,monitoring of his work.

Monitoring of subcontractor, ordered material, bought out items

Inspection of bought out items such as Instrument panels, control valves, Process sensors

Transmitters, converters, controllers, switches

Inspection & follow-up to the in house production dept. for Instruments

Marketing, sales for Turnkey projects in Instrumentation

Bid evaluation, defining customer specifications etc.

Negotiation &finalization of the order from customer.

Installation &commissioning of the project

Operation & maintenance procedures.

Handover of the project

May1985- Nov.1988

Company: Ultramatix systems (Pune)Pvt. Ltd.

Sr. Sales &service Executive


Sales &servicing &commissioning of Data loggers, Scanners, Digital Indicators,Digital

Temperature controllers

Sales, servicing of PC based Data acquisition systems

Sales, servicing commissioning of CORECI –France range of process Instruments such as digital microprocessor based PID controllers, Digital setting programmers, Humidity sensor transmitters,

Sales, servicing &commissioning of Georgin-France make Zener barriers, Pressure switches etc.

Sales, servicing &commissioning of Negretti-Automation make Load cells, Load cell weighing system

Operation & maintenance procedures, Service/maintenance contract s management.


Company: Sudarshan chemical Industries Ltd Pune.

Design Engineer


Design Detail Engg, project coordination, Installation commissioning for Electrical & Instrumentation of new, modernization projects at Roha –Dist. Raigad

Design Detail Engg,project coordination,Installation &commissioning of Electrical &Instrumentation for Diketene plant

Design Detail Engg.Project coordination, Installation &commissioning of Electrical & Instrumentation for Butachlor plant.

Design Detail Engg.Project coordination, Installation&commissioning of Electrical & Instrumentation for Bottling plant

Maintenance of Electrical &Instrumentation for Pigment plants, Dyes, Intermediates

Cadmium, Diketene Plant

Contact this candidate