Esteban Balanag Dulay
Address: #** *********, ******, **** ** Union, PHILIPPINES
E-mail : *****.********@*****.***
Mobile No.: +639**-***-****/ +639**-***-****
PERSONAL INFORMATION
Nationality Filipino
Date of Birth February 19, 1971
Height 5’9” tall
Weight 160 lbs
Religion Roman Catholic
Civil Status Married
EDUCATIONAL ATTAINMENT
COLLEGE: Bachelor of Science in Electrical Engineering
School: Don Mariano Marcos Memorial State University-Mid La Union Campus, San Fernando La Union
Vocational: Shielded Metal Arc Welding (SMAW)
School: Don Mariano Marcos Memorial State University-Mid La Union Campus, San Fernando La Union
WORK EXPERIENCES
I. Al-Rashed Polystyrene Products Factory, Dammam Saudi Arabia (March 1, 2016- November 27, 2018)
Position : Production Supervisor (Molding Section)
Duties and Responsibilities
1.Plans and schedule production operation based on volume forecast and actual requirements.
2.Directs and control the activities in the area to assure the smooth flow of production operations.
3.Initiates process improvements, equipment upgrade and other opportunities in innovation.
4.Administered that the assigned area and contributes to the consistent attainment of quality and safety standards for finished products in the workplace.
5.Participates in the selection of new production employee.
6.Orient and train new production employees.
II. CIGNAL CABLE TV, Manila Philippines(Sept. 22, 2014 – April 14, 2015)
Position : Pre-Sales Engineer
Duties and Responsibilities
1. Supports the Sales Team in marketing in meeting with clients.
2. Prepares the Technical Design of CATV systems in projects.
3. Prepares the BOQ (Bill of Quantity) of the designed CATV systems.
4. Conducts ocular inspection for the CATV systems design.
5. Review and revise CATV system design if there are revisions in a project.
6. Prepares layout of structural cabling for the co-axial cabling in the project.
7. Prepares layout of ATP (Auxiliary Terminal Panel), Panel boxes and Pull boxes.
8. Prepares layout for the location of Satellite Dish.
III. LDP – Hatchery (Aug., 12, 2013 – Jul. 16, 2014)
Alacan, San Fabian, Pangasinan, Philippines
Position : Maintenance Technician
Duties and Responsibilities
7.Supports production as needed concerning machine problems/trouble and in facility equipment.
8.Performs machine troubleshooting and corrective maintenance on Setter Machines, Hatcher Machines, Chiller-Compressors and Cistern Tanks including facility equipment.
9.Performs Preventive Maintenance as scheduled on the Setter Machines, Hatcher Machines, Chiller-Compressors and Cistern Tanks including facility equipment..
10.Performs commissioning of machines in the hatchery plant.
11.Manages and control tools and machine spare parts.
12.Communicates and makes transaction with maker or supplier.
13.Prepares daily reports in projects and activities made.
14.Conducts daily monitoring of facility equipment.
15.Ensures compliance to GMP, ISO/QS Standards, 5S, Safety and Standard Operating Procedures (SOP).
IV. Sanyo Semiconductor Manufacturing Philippines, Inc. (Sept. 2000 – Sept., 2008)
Luisita Industrial Park, San Miguel, Tarlac City, Philippines
Tel. No.: (045-***-**** to 65
Position : Equipment Engineer (Sept., 2000 – June, 2006)
Manufacturing Engineering Department Section 2 – Molding & Mark-Trim-Form
Duties and Responsibilities
1.Supports production as needed concerning machine and die problems/trouble.
2.Performs machine and die troubleshooting and corrective maintenance
3.Performs Preventive Maintenance schedule on the machine and die.
4.Performs conversion of machine/die, machine/die upgrade and modification.
5.Set-ups, authorizes and evaluates new machine/new die, new package type and new materials.
6.Manages and control tools and machine spare parts.
7.Communicates and makes transaction with maker or supplier.
8.Enhances competency by attending seminar and training (local and abroad).
9.Prepares weekly/monthly highlights of all assembly issues, projects and activities made.
10.Ensures compliance to ESD, GMP, ISO/QS Standards, 5S, Safety and Standard Operating Procedures (SOP).
11.Investigates and analyze line problems or failure thru characterization and experimentation of all factors involved in the process/section. (Man, Machine, method, material, and environment criteria)
12.Performs machine and material experiment for authorization and quality improvement.
13.Supervises data gathering for authorization of equipment and materials (Experiment, Pilot lot, etc..)
14.Recommends, implements and monitors the corrective and preventive action done by running actual pilot or production products
V. ROMAGO, INC. ( May, 2000 – Aug., 2000)
Camp John Hay Compound, Baguio City, Philippines
Position
Cadet Engineer
Duties and Responsibilities
1. Preparation of Typical Wiring Diagram
2 .Preparation of Cable Tray Layout
3. Preparation of Cable Routing Layout and Penetration Drawings.
4. Preparation of Equipment layout
5. Responsible in the development of electrical drawings, plans/ layouts.
6. Perform inspection activities in electrical wiring layouts and conduit layouts.
7. Responsible for the preparation of the technical correspondence to clients and sub-contructors.
8. Conducts site visit and identify areas of concern and recommends course of actions.
9. Reviews Vendor Schematic Diagram.
10. Supervised and check generation of drawings for fabrication and ensures scheduled release of document to site team.
SKILLS
1. Assembly/Disassembly of Molding and Trim & Form Die
2. Knows how to operate Molding and Marking-Trim-Form machines in manual and automatic modes.
3. Knowledgeable in the basic concept of pneumatics and hydraulic valves.
4. Knowledgeable in the basic concept of PLC
5. Computer literate ( Word, Excel, Powerpoint, Autocad)
6. Knows how to read and conduct electrical plan and technical drawings of buildings
7. Knowledgeable in electrical layouting and electrical wirings in a building
8. Knowledge in the use of profile projector
9. Knowledgeable in electrical computations and layout in buildings
TRAININGS and SEMINARS ATTENDED
1.Fitting Safety Seminar by Mr. Abel Magsakay – January 17, 2001
2.Basic Pneumatics Principles by Mr. Joshua De la Cruz – March 30, 2001
3.Documentation Seminar & ISO Seminar by Mr. Narayanan Sreenivas – May 29 to 31, 2001
4.Basic Quality Awareness Seminar by The QC Staff – July 19, 2001
5.Basic Electronics and Motors Training by Mr. Arnel Hortaleza – November 13 & 14, 2001
6.Basic First Aid Training by Mr. Alex Quito of PNRC – November 20 to 22, 2001
7.Roadmap 2002 of Sumitomo Bakelite by Sumitomo Bakelite – April 25, 2002
8.Statistical Process Control Phase 1 & 2 by Mr. Jose Tomanan & Lydelio Esmael – May 24 & 25, 2002
9.Planned Maintenance System Training by Mr. Rogelio Mendez – August 10, 2002
10.Echo Seminar on Poka-Yoke by Mr. Jose Tomanan – August 28, 2002
11.Wafer Fabrication & Materials Science Echo Seminar by Mr. Joselito Figuracion – September 16, 2002
12.5S Awareness Seminar by Mr. Michael Corpuz – October 2, 2002
13.Failure Mode & Effect Analysis (FMEA) - February 6 & 7, 2003
14.Problem Solving Methodology by Mr. Peter T. Awayan – July 4-6, 2004
15.On-the-Job Training at the La Union Electric Company, San Fernando, La Union
CHARACTER REFERENCES
1.Eng’r. Jeson Solis – Capas, Tarlac – Cp No. +639**-***-****
2.Eng’r. Carlo Dungo – Mabalacat, Pampanga – Cp No. +639**-***-****
3.Eng’r. Regino Santiago – Owner, Pilsan Technologies & Automation - Mabalacat, Pampanga