Mahmood Ali

MEP Projects Engineer/ Facilities Expert

Tel 1: +974-********/ 50792844

skype: mehmood.engr

adc6hm@r.postjobfree.com;

Registered Engineer for more than Ten (10) years of experience in the field of MEP Engineering highly specialist in Infrastructure and Building Services projects, coordinated with all regulatory authorities for all sets of approvals and licensing from design phase till operations phase. Treated Sewage Effluent (TSE) waste water/ sewage treatment plants (STPs), Reverse Osmosis (R.O) plants, knowledgeable in design and construction management, from Conceptual Planning, FEED up to Detailed Design viewpoint. Has an extensive experience in infrastructure, Chilled water plants, commercial steam boilers and Power Generation Plant (16000KVA). Expert in Project Time Schedule Management of properties from construction phase to hand-over and Plan Preventive Maintenance.

Involve in quality assurance, project coordination, site supervision and field investigation, preparation of technical specifications, material take-off, construction scope of work, performs site survey & data gathering prior to design activity requirements.

Education:

BSc in Electrical Engineering, SUIT, Pakistan

PMP Project Management (Primavera P6), Pakistan

Electrical Drafting Design & Techniques, NIDA, Pakistan PLC Ladder Logic, NIDA, Pakistan

Professional Experiences:

HOD Engineering/ Facilities Manager: {Simaisma A Murwab Resort (Aug. 2017 – Till Date)}

- Preparation of operational manual – SOPs, LSOP, DMS, O & M Manuals, Planned Maintenance Programs, Budgets

- Evaluation BOQs, HOS & E, FF & E, OS & E.

- Lead department’s functions for the resort such as daily engineering operations for interior/exterior facilities including plumbing, refrigeration, heating/cooling, painting, carpentry, structural, recycling, electrical, ground care, vast landscape and parking areas.

- Developed and implemented cost reduction, work simplification methods and techniques and improvement programs

- Made work-schedules, orders, application, instruction, explanatory notes, drawings, maps, schemes other technical documentation, and reports by approved forms and terms.

- Maintained requisitions/orders pertain to maintenance of equipment, materials and supplies.

- Lead the execution of several new projects including planning and costing.

- Lead fire and safety policies and procedure for the hotel, Carried out fire brigade duties as per requirement

- Initiated energy and water conservation plans, as per Qatar Green Building Council (QGBC)

- Inspect and review projects to monitor compliance with building and safety codes, and other regulations

- Meet vendors and suppliers to discuss scope of, and products and materials used in, repair activities.

- Control observance of approved requirements and current norms, rules and standards.

- Coach and counsel employees to reflect corporate service standards and procedures.

- Continuously evaluate the performance of engineering staff and take corrective actions when necessary.

- Maintain communications with Corporate team

- Provide guidance and support to hotel staffs relating guest satisfaction scores (GSS) and Brand quality assurance (QA) inspections.

- Lead Engineering team in addressing engineering-related issues that affect GSS or QA scores

- Interviews and selects maintenance team.

- Supervise health, safety and security procedures of the guests and staff.

- Manage appropriate maintenance to ensure on-going appreciation of the engineering team and ensuring the control of heat, light and power, water consumption, wastewater discharge and boiler emissions and recommending current best methods for energy conservation and economical facility operations.

- Supervise all relevant HSE & Quality Management System procedures and Work Instructions.

- Plan & execute new/ modification improvement Projects.

- Performs regularly scheduled inspections to direct and complete the work as outlined in the preventative maintenance program of all equipment.

- Maintain file of all equipment repairs and vendors that have service equipment

- Prepare and submit departmental Budget / Capex / Cost Control tracking reports.

- Property Management, Maintenance Contracts (AMC), External Liaison. MEP Engineering Manager/ CE/ Projects Manager: {Anantara – Banana Island Resort Doha (Jun. 2014 – Aug. 2017)}

- Participated in the project progress M & E, pre-opening, migration and post operations DLP supervision and management of systems integration of the Banana Island Resort Doha.

- Project scoping, formulation, proposal, execution, appraisal and closing.

- Ensuring buildings compliance with Corporate and Regulatory Requirements, Audits and Inspections.

- Installed and operate 3 nos. of R.O. ‘reverse osmosis’ plant, producing 1500 cubic meter of portable water per day from sea water;

- Maintains power generation plant & it’s network consists of 8 ‘Cummins’ Diesel Generators, of them each produce 2000KVA, 4 Step-up transformers and 11 step-down TX (substations) and a vast network of MDBs & DBs;

- Installed & operate 2 nos. of TSE (Treated Sewage Effluent) / Sewage Treatment Plants (STP), treating 1000 cubic meters of sewage per day i.e. used for daily irrigation purpose;

- Banana Island Resort has 2 nos. of boilers, each developing automated steam of 1023 kg, to supply heat for buildings and laundry processes;

- Plans and formulates aspects of research and development proposals such as objective or purpose of project, applications that can be used from findings, costs of project, and equipment and human resource requirements;

- Oversees key projects, processes and performance reports, data and analysis. Plans documentation system;

- Selects, develops, trains and supervises staff;

- Selects correct design concepts and fundamental technology used for new products or improvement for existing ones;

- Reviews and analyzes proposals submitted to determine if benefits derived and possible applications justify expenditures;

- Approves and submits proposals considered feasible to management for consideration and allocation of funds or allocates funds from the department budget;

- Develops and implements methods and procedures for monitoring projects such as preparation of records of expenditures and operational findings, progress reports, and staff conferences to inform management of current status of each project;

- Directs the review of production costs and product quality, and modifies production and inventory control programs to maintain and enhance profitable operation of division;

- Directs preparation of accounting records for budgetary, production efficiency or other such purposes.

- Recommends budgets to management, including staff use, technology, facility and equipment requirements or improvements;

- Negotiates contracts with consulting firms to perform research or other applicable studies or support;

- Takes rapid action on daily reactive works as received via various means e.g. Client, helpdesk;

- Ensures compliance with Health and Safety requirements and to assist in any training of the team;

- Assisting with the monitoring and supervision on daily basis, of sub-contractors or any other staff as directed by the contract manager, which include assisting with the processing and completion of any relevant reports and permits;

- Inspects BMS & Fire Alarm fault logs and take necessary actions;

- Act as system admin for all ELV system workstations; maintain history records, logs, user lists, passwords, backups;

- Monitor and coordinate with installation & commissioning team, subcontractors for daily activities and work performance to meet the deadlines;

- Checks physical installation as per drawing;

- Undertakes any reasonable request instructed by the contract management, client helpdesk or duty engineer;

- Performs planned preventative and reactive maintenance tasks on all associated equipment, including fault finding and repair;

- Inspects Mechanical & Electrical equipment and systems to ensure safe and efficient operation in accordance with agreed procedures and company quality standards;

- Up keeping of records on servicing of plant and equipment and maintaining the plant asset registers;

- Directs appropriate support for manufacturing and quality functions within the organization; Projects on hand:

1. Directs appropriate support for manufacturing and quality functions within the organization; 2. Diesel Power Generators (8 nos. x 2000KVA Cummins) a) 8 nos. of Cummins diesel generators generating 12000 KW. b) This is further stepped-up through 4 nos. Transformers (415v/ 11kv) through POPs c) Further supplied to 11 nos. of Step-Down Tx (Substations) 11kv/415 through MCC Switch-gear. Further distributed to SMDBs & DB’s.

3. Commissioning, installation and maintenance of 2 nos. of STPs (Italprogetti & Veolia) a) After removal of fine solids, grit & grease, the effluent is processed at Aeration Tank with oxygen and then sent to MBS and through the membranes the water and waste is further separated. b) Back-wash process is done by volumetric pumps when the pressure on the membranes is increased.

c) The membranes are regularly chemically dosed and back-washed with chlorine & hydrochloric acid to restore the original properties of membranes. d) The product is further passed through UV for further disinfection. e) The sludge and TSE water are separated.

4. Commissioning & installation of 3 nos. of R.Os (Italprogetti) 5. Misting system in artificial green-house.

6. Radiant cooling system (chilled water)

7. 2-tons steam boilers (Cleaver-Brooks)

8. Lifting stations & sumpits networks.

9. LNG tanks & networks.

10. Trane Chillers (RTAC-Trane)

Electrical Design & Planning Engineer: {MACE Qatar – BARWA Commercial Avenue

(Oct. 2011 – May 2014)}

- Responsible for designing electrical installations to Kahramaa standards;

- Design electrical systems such as distribution panels, control panels & lighting protection systems;

- Provide technical information and drawings to the MEP Engineer, Site Supervisors, Certified Electricians and Electricians ensuring proper understanding of initial drawings;

- Prepare electrical Bill of Quantities for each new installation and ensure that all bills are within the budget;

- Prepare cost estimates (inclusive of expected labor allowances) for costing/planning purposes;

- Advise on expected installation timeframes and labour requirements for each electrical installation to properly set expectations of Managers and Client;

- To install, inspect, and repair lighting, switches, receptacles, generators, power distribution and circuit breaker panels;

- Maintain facility maps for all existing and new components of the electric distribution systems;

- Responsible for testing, sampling, inspecting, record keeping and reporting in accordance with applicable regulations/policies;

- Perform quality testing in accordance with regulatory requirements to ensure the safe operation of electrical distribution and power generation systems;

- To inspect, test and repair electrical distribution equipment and power generators to ensure that all equipment are working properly and up to standards;

- Work from plans and specifications and follow rough sketches, oral and written instructions;

- Verify drawings & specification of electrical equipment;

- Assembly of cable schedule;

- Technical evaluation of potential electrical system equipment vendors;

- Ensure the regulatory body rule compliance;

- Design of final equipment layout and arrangement of cable trays;

- Perform routine inspection and document result in accordance with approved client’s procedures;

- Monitor activities of supervision contractor and construction Contractors;

- Witness and verify continuity, merger, HI-POT and component testing for MV & LV equipment;

- Monitor Quality control on construction progress activities;

- Issues punch listing for outstanding works;

- Writing of electrical system RFQs and technical documents;

- Performs the related tasks.

Projects on hand:

1. Complete system designing & installation all HV cable & SS. 2. Street lights & its network

3. Earthing & lightning protection

Electrical Plant Engineer: {Pakistan Electric Power Co. (Aug. 2010 – Sept. 2011)}

- Under the supervision of Sr. Electrical Engineers, I was taking care of maintenance of HT/LT power supply system includes VCB & ACB Breakers, 2000KVA Transformers, 1000KVA & 250KVA DG sets & panel boards, fire alarm and firefighting system;

- Assist design of Water Treatment Plant including distributive control system for process automation

(A/B), installation details & Developed Process and Instrumentation Diagrams;

- Attending breakdown maintenance service of generator, motors and industrial control equipment;

- Maintain complete records of power consumption, industrial control equipment & earth pit checking and lighting protection system on quarterly basis;

- HV & LV Cable laying, gladding, testing and commissioning of power supply for new plants

- Installation of HT/LT switchgear of different ratings;

- Conduits & Cable Trays Installation for CCTV, P.A. system, emergency central batteries system, fire alarm system (operations), SMATV system and Telephone system;

- Executing the city’s main grid station and constantly checks for the faults in the transformer chain through different relays connected to its destination parts;

- Checks if the main supply transformer is overloaded, if it is, then the load is transferred to another (standby) transformer;

- Also worked on circuit breakers;

- checks and analyzes the load on different feeders;

- Adapted high standard of safety and quality assurance; Projects on hand (Hayat Abad, Phase-1 Grid Station): 1. Transformers and SS loads calculations

2. Design grid system SLG

3. Carrying out grid stability & loss calculations. 4. Evaluation/ calculation for power transmission/ storage and demand. Junior Electrical Engineer: {GHC International Pvt. Ltd. (Contract Jan. 2010 – July 2010)}

- Prepare routine studies, designs, drawings, sketches, and plans using AutoCAD and other software tools;

- Conduct field inspections of existing structures, construction sites and projects;

- Prepare reports, contract specifications, lists of materials, cost estimates, schedules, and progress payments;

- Gather, prepare, and maintain engineering data, records, and reports;

- Analyze electronic circuits and schematics to determine functionality;

- Develop accurate schematics in a timely fashion of complicated devices in various conditions;

- Accurately enter characteristics of devices into databases and other tools for further analysis;

- Develop tools and techniques to help minimize the analysis time of a given device;

- Ad hoc support as needed to fulfill the mission; Projects on hand:

- Designing wiring SLD & load calculations in Allied Bank building, Phase-5 Extra Skills:

Hardware: Z80 Microprocessor, Intel 8085 Microprocessor, Analog Design, Digital Design, RF Design, Digital signal processing, Digital image processing, Installation and operation of CCTV Cameras Project Management & Primavera P6/P5/P3:

- Developing project work breakdown structure

- Sequencing and organizing project activities

- Project Planning and Scheduling

- Resource Management and leveling

- Cost Management and Budgeting

Computer & Technical Skills:

Operating System: All Microsoft Windows Operating System Design: MATLAB, and MATHEMATICA, DIALux Lightning Design Programming Language: AutoCAD, C++, Work Bench Tool General: Office365, MS Office 2007 & 2010 and Visio Technical Languages Proficiency:

Excellent command of English, Pashtu, Dari, Urdu, & Arabic (moderate) Personal Data:

- Date of Birth: July 24, 1985 - Place of Birth: Qatar

- Nationality: Pakistani - Social Status: Married

References shall be furnished upon request.

Contact this candidate