Mechanical Engineer Power Plant
Resume:
Rian Jeorge Macatangay
Block *** Bukit Batok West Ave 7, #10-16 Singapore, 650404
Singapore, (650404)
Tel.No.: +65 96110243
Mobile No.: +65 96110243 (Singapore no.)
Email Add: adc61b@r.postjobfree.com
Current Location: Singapore
Availability: I can start for work 1 month notice.
PERSONAL DATA
Age:
34
Date of Birth:
Place of Birth:
May 1, 1985
Batangas CityPhilippines
Gender:
Male
Civil Status:
Married
Height:
171.22 cm
Weight:
72 kg
Nationality:
Filipino
Religion:
Christianity – Catholic
Permanent Address:
412 Psalm Street Villa Penafrancia Subdivision Bolbok, BatangasCity
Batangas, Philippines 4200
OBJECTIVE
To have an active participation in an organization that has reputation for diversity that will enable me to contribute my skills and knowledge and to provide an opportunity for professional development.
WORK EXPERIENCE
1.
Position:
Sr. Project Engineer / Design & Maintenance Engineer
Duration:
Aug 3,2014 – up to present
Company Industry:
Haileck Engineering Pte Ltd.
Location
40 Tuas West Road, Singapore S638389
Department:
Engineering, Fabrication & Plant Maintenance
Job Description:
Coordinating project executive activities which include carrying out the implementation and handover
Ensure all projects works are executed safely and coordinate technical issues.
Prepare Engineering Design (Piping, 3d & 2d Modeling software) Spoolgen, Cadworx, PDMS, & Isogen.
Manage project development from the initial stage to closure.
Understand constructability issues and ensure these are reflected in the design.
SP3D & Navisworks navigation user. CEASAR II –Piping Stress analysis user
Structural detailer using Autocad software, knowledge in TEKLA software
Schematic interpretation of drawing such as P&ID / GA / Material Specification, STD supports & welding.
Work as a Maintenance engineer responsible for work order, identification of scope & analysis.
Conduct field walk down to identify requirements, safety hazards, and provide procedures to the job.
Estimate required hour for work task, duration and manpower. Plan job given the skilled workforce.
Determine in QA/QC, procedures, Equipment, Tools, technical documents and specifications.
Preventive and corrective maintenance of static & rotating equipment including servicing.
Support site pre-commissioning activities and cross discipline knowledge.
Manage workshop activities, manpower allocation, planning, estimates tender projects, A&A works,
Commercial claims and budget forecast, and lead supervisors for daily/weekly activities.
Project Handled :
•ST15003 Aurora Project Fabrication Structural Beams
Client: Shimizu Corporation
Address: 8 Kallang Avenue Aperia Tower Singapore 339509
•Aurora EOS Piping Fabrication Project
Client: ExxonMobil Jurong Island Singapore
•TK-1106 Tank Rehabilitation Project
Client: ExxonMobil Jurong Island Singapore
•TK-5402 Tank Rehabilitation Project
Client: ExxonMobil Jurong Island Singapore
•Afton Lion Phase 2 Piping Fabrication Project
Client: Afton Chemical Asia Pacific Jurong Island Singapore
•Fabrication of Build Up Structure for Single Story Sport Court
Client: Okada-MCS Pte Ltd
Address: 81 Tagore Lane #01-22 Singapore 787502
•Fabrication of Floating Hopper
Client: SGM Engineering Pte Ltd
Address: 7500A Beach Road #14-302 the Plaza Singapore 199591
•SAR2 Interconnecting Pipeline Project
Client: ExxonMobil Jurong Island Singapore
•TK-5405 Tank Rehabilitation Project
Client: ExxonMobil Jurong Island Singapore
•TK-5403 Tank Rehabilitation Project
Client: ExxonMobil Jurong Island Singapore
•Neste Growth Project / Brown field Expansion Project
Client: Technip FMC /Neste Tuas 01,South Lane 637301
• Rehabilitation of Spherical Tank Gas Holder at Toh Tuck Station
Client: SP Group / IIW Singapore Pte Ltd.
Skid completed works under Emerson Process Management:
Position:
•Gas Filtration Skid for Jurong Cogen Project
•Hyundai - Fabrication of metering skids
•KBR Culzean - Gas Metering Skid
•Yamal LNG Project - Water Draw Skid
•Maersk Culzean FSO Project - Piping Fab & Liquid Metering
•Mehar & Sofuagas Metering Skid
•VO 1 for Maersk Culzean FSO Project - Piping Fab & Liquid Metering
•10" x 600# RF Senior Orifice Meter Run - Fabrication of Metering Skid
•Fabrication of Metering Skid - Natural Feed Gas & Pipeline Gas
2.
Position:
Project Engineer (Mechanical)
Duration:
Feb 19,2014 – July 31,2014
Company Industry:
INPEX ICHTHYS LNG PROJECT (JGC,KBR,CHIYODA & AG&P)GROUP OF COMPANY VENTURES
Location
AG&P Yard 2, Philippine PortsAuthorityBatangasCity
Department:
Engineering
Job Description:
Responsible for coordinating with Operations Manager to update status of construction.
Manage campaign performance and optimization recommendations
Coordinates with various departments regarding the project schedule and status.
Assists Operations Planning & Control personnel for tendering bid proposals.
Performs other duties as may be assigned from time to time.
Oversees that project activities are within schedule, designed plans and specifications .
Discusses to concerned team activities to be performed during erection and construction.
Reports to concerned departments variations in fabrication and erection works.
Generate Engineering Drawings & Estimate Quantities of Materials needed for approval of consultant.
Prepare Quotations and value engineering pertaining to new model of construction materials for approval.
3.
Position:
Piping & Mechanical Field Engineer
Duration:
Sept 25,2013 – Feb. 15, 2014
Company:
Fluor Dow Company, Texas U.S.A (Atlantic, Gulf & Pacific Company of Manila (AG&P)
Company Industry:
Propane De-Hydrogenation Pipe Rack Module Project
Location
AG&P Yard 2, Philippine Ports Authority BatangasCity
Department:
Engineering
Job Description:
Ensuring the scope of work is achieved in accordance with contract requirement and time frame.
Managing construction activities carried out by contractors,
Compliance with specifications and standard established.
Prepare Quotations and value engineering pertaining to new model of construction materials for approval.
Coordinating the activities of subordinated supervisors ensuring that the project steps are respected
Piping internal inspection witness for large bore piping.
Check if the latest construction drawings are used.
Schedule monitoring for manpower mobilization welding Dia-inch, No. of spools and Pipe Supports
4.
Position:
Field Engineer (Piping & Mechanical)
Duration:
Sept 11 2012- June 17, 2013
Company:
Keppel Shipyard International
Company Industry:
Construction / Building
Location
Barangay Bolo, San Roque Batangas.
Department:
Engineering
Job Description:
Reviews plans, specifications and engineering drawings prior to erection.
Checks if project documents and drawings are in its latest registered revision.
Processes material requirements for a project.
Discusses to concerned team/personnel the activities to be performed during erection and construction.
Reports to concerned departments variations in fabrication and erection works.
Prepares field queries about possible re-works based on actual site checking.
Does visual inspection to ensure workmanship meets the standards used in the project.
Prepares daily progress report, monthly report & balance material report for proper monitoring of the project.
5.
Position:
Field Engineer (Pre-commissioning and piping/mechanical)
Duration:
Nov. 14. 2011 – July 2012
Company:
DMCI Power Plant Semirara
Company Industry:
Coal Fire Thermal Power Plant
Location
Calaca Balayan Batangas
Department:
Engineering
Job Description:
• Planning and managing of design development, estimates, technical calculations, specifications of materials, project management, pre-commissioning, maintenance, audits of customer installations and do conduct engineering audit to existing installations to ensure a quality and safe customer engineering design and installation
• Delivered outputs to the highest possible standard and displays concern for all areas involved.
• Managed maintenance of all equipment onboard in accordance with the planned maintenance system and prescribed maintenance procedures.
• Acquired vast knowledge in servicing equipment within the workshop & site environments.
• Performed operation and maintenance of crushers, screens, pumps, automated &semi-automated systems, compressors, conveyors, repacking and overhauling valves and carried out performance analysis tests on plant.
• Served as a key decision maker in selecting the latest and required systems and tools.
• Performed under tremendous pressure and met deadlines with ease and efficiency.
• Performed Pressure Testing, Water Flushing, Hydro Jetting/Retro Jetting, Pigging Process, Hot Oil Flushing, Video Inspections of Pipelines and Equipment, Purification of Hydraulic Oils, Flange Management including Bolt Torquing and Tensioning, Chemical Cleaning, Nitrogen and Helium Leak Testing of Pipe Lines, Hydraulic Tubing, Piping System Fabrication., Installation and Testing, Prefabrications of GRE Pipes.
• Develop and implement workshop improvement programs across multi-cultural barriers.
• Development of training & assessment tools for development of local workforces.
6.
Position:
QA/QC Inspector
Duration:
April 14 2011 – Nov. 12 2011
Company:
CESCO Offshore Construction Services Inc.
Company Industry:
Construction / Building
Location
San Roque, Bauan Batangas
Department:
Engineering
Job Description:
Elaborating and coordinating the welding specifications, and codes/standards
Coordination with the field subcontractors for all welding procedure specifications and procedures qualifications reports
Review course and effects of welding defects and take remedial actions
Coordination with the field subcontractors and the Third Party NDT Inspection Company
Review of the radiographic film and all NDT reports on a daily basis
Auditing of the approved Third Party NDT Inspection Company
Reviewing the inspection and testing methods and procedures for Radiographic, Dye Penetrant, Magnetic Particle, and Ultrasonic inspections
Witnessing of welder qualifications testing and procedures qualification testing
Witnessing any remedial repair welding
Reviewing of the welding summery reports
Checking the hydrostatic test packages for NDT compliance prior to testing
Advising the site subcontractors with regards to welding and testing
Monitor any Post Weld Heat Treatment on site and review the completed test reporting
7.
Position:
Mechanical Engineer Technician
Duration:
Jun. 28 2008– Aug 9 2010
Company:
Provincial Engineers Office Batangas
Company Industry:
Heavy Industrial / Machinery / Equipment
Location
BatangasCity
Department:
Mechanical Engineering
Job Description:
•Boiler Testing Technician
•Hydraulic Controls Technician
•Pipe Testing Technician
Conducts tests of mechanical systems and assembles and installs mechanical assemblies in support of Mechanical Engineers and Mechanical Engineering Associates.
•assembles and installs new or modified mechanical assemblies, components, machine tools, controls and hydraulic power systems under the direction of mechanical engineers, engineering technologists and engineering associates
•performs workshop and field tests using standard instruments and methods
•assists in developing quality control tests for products and components
8.
Position:
Material Coordinator/ Expeditor
Duration:
September 14, 2007- April 28, 2008
Company:
Cesco Offshore Construction Services Inc.
Company Industry:
Construction / Building
Location
Barangay Bolo San Roque Batangas.
Department:
Procurement and Engineering
Job Description:
Confer with department supervisors or other personnel to assess progress and discuss needed changes.
Examine documents, materials, or products and monitor work processes to assess completeness, accuracy, and conformance to standards and specifications.
Review documents, such as production schedules, work orders, or staffing tables, to determine personnel or materials requirements or material priorities.
Confer with establishment personnel, vendors, or customers to coordinate production or shipping activities and to resolve complaints or eliminate delays.
Requisition and maintain inventories of materials or supplies necessary to meet production demands.
Revise production schedules when required due to design changes, labor or material shortages, backlogs, or other interruptions, collaborating with management, marketing, sales, production, or engineering.
Distribute production schedules or work orders to departments.
Arrange for delivery, assembly, or distribution of supplies or parts to expedite flow of materials and meet production schedules.
Record production data, including volume produced, consumption of raw materials, or quality control measures.
Contact suppliers to verify shipment details.
Maintain files, such as maintenance records, bills of lading, or cost reports.
Compile information, such as production rates and progress, materials inventories, materials used, or customer information, so that status reports can be completed.
EDUCATION
Highest Education
Education Level:
Bachelor's / College Degree
Education Field:
Engineering(Mechanical)
Course:
Bachelor of Science in Mechanical Engineering
School/University:
Batangas State University
Location:
BatangasCity
Date:
Education Level:
Education Field:
School/University:
Location:
Date:
Jun 2002 - May 2007
Secondary School Education
High School Level
DivineChildAcademy
BatangasCity
June 1998 – March 2002
Primary School Education
Elementary Education
DivineChildAcademy
BatangasCity
June 1992 – March 1998
SKILLS
Skill
Yrs of Experience
Remarks
1.
Technical Skills/Mechanical Skills
12
•Effective communication •Computer and technical literacy: advanced on computer software, 2D & 3d Modeling, detailing, MTO, and costing & procurement. •Problem-solving/Creativity •Interpersonal abilities: •Teamwork skills •Diversity sensitivity •Planning and organizing •Leadership and management •Adaptability and flexibility •Professionalism and work ethic •Positive attitude and energy.
I have an extensive skills, knowledge and experience as a Project Engineer. I am also a qualified mechanical engineer with a Bachelor of Science in Mechanical Engineering degree. I have knowledge and skills in Auto-cad Design, Planning and Estimation Tendering. I have broad knowledge in Skid modules, Ship Building, Static and Rotating Equipment, Chemical cleaning, Experience on Modular projects, Piping design, CNC machine programming and Petrochemical Oil and Gas Turn-Around Project.
TRAININGS/SEMINARS
Date
Topic/Course Title
Feb 14, 2017- Feb 17, 2017
Nov 7, 2016- Nov 12, 2016
Feb. 28, 2015- May 09, 2015
April 19,2015- April 24, 2015
Aug 22,2014
Aug 28, 2014
Aug 15-16, 2014
Sept 8, 2014
Feb. 21, 2012-Feb 22, 2012
Aug 3, 2011- Aug 5, 2011
Building Construction Supervisor Safety Course
Avanta Global
70/72 Bendemeer Road,#03-03/04 Luzeme, Singapore 339941
SMART PLANT ISOMETRIC & SPOOLGEN
Intergraph Process Power and Offshore Pte Ltd
77 Science Park Drive #02-08 Cintech III Singapore Science Park, Singapore 118256
CADWORX PLANT PROFESSIONAL 3D MODELING BY (INTERGRAPH)
HAI LECK ENGINEERING PTE LTD / Emerson Process Management
47 Tuas Circuit Singapore 637357
STEEL PROJECTS FOR CNC MACHINE PROGRAMMING
FICEP GROUP COMPANY-RUE DES FRERES LUMIERE-38200 VIENNE FRANCE
Supervise Workplace Safety and Health in Process Plant
NTUC Learning Hub- Industry Singapore Workforce Skill Qualification
EMS Building,60 Benoi Road, #01-08, Singapore 629906
WSQ SUPERVISE WORK IN CONFINED SPACE OPERATION
(IPI) INSTITUTE OF PROCESS INDUSTRY
18 Boonlay Way #03-119,Tradehub 21 Singapore
WORK AT HEIGHT COURSE FOR SUPERVISORS
NTUC Learning Hub- Industry Singapore Workforce Skill Qualification
EMS Building,60 Benoi Road, #01-08, Singapore 629906
Contractor Autorized Signatory for Permit to Work
SHELL CHEMICALS SERAYA PTE LTD.
Seraya Jurong Island, Singapore
Global Methane Initiative (GMI)- Philippine Landfill Gas Forum
Philippine Council for industry, Energy and Emerging Technology Research and Development - Department of Science and Technology Eastwood Richmonde Hotel, Quezon City
Chemical Cleaning (Theory and Practice)
CESCO Offshore Construction Services Fabrication Area, Batangas
Aug 8, 2011- Aug 9, 2011
Hydro/Retro Jetting (Theory and Practice)
CESCO Offshore Construction Services Fabrication Area, Batangas
May 8, 2012-May 9, 2012
First Aid Training For Industrial Employees
Philippine Red Cross
CESCO Offshore Construction Services Office
Sep 7, 2010-Jan 4, 2011
Trainee Mechanical Engineer (On the Job Training)
Provincial Engineers Office Batangas
Jul 8, 2009-Jul 8, 2009
May 11, 2008-Aug 27, 2008
Educational Training Seminar on Mechanical Services in Building Structures in Industrial Plant & Compressed Air
Junior Philippine Society of Mechanical Engineering
Manila Philippines
Pipe Fitting Operation
Batangas Manpower Training Center Inc. (Tesda Accredited)
BatangasCity
Sep 8, 2007- Sep 9, 2007
Mar 18, 2007- Mar 19, 2007
Educational Training Seminar on Shortcut Solutions in Mathematics
Batangas State University
Batangas St ate University
Design of Piping Network and Heat Recovery Refrigiration System
BatangasStateUniversity
Mar 10, 2005- May 5, 2005
Food and Beverage Attendant Training
TESDA Training Center, Inc
TESDA Training Center, Inc
LANGUAGES SPOKEN
Language
Proficiency Level
(5=Excellent; 1=Poor)
1.
Tagalog
5
2.
English
4
REFERENCES
References furnished on request.
Contact this candidate