Mechanical Engineer

RUSTICO M. BATOON, PME

Mobile: +974********

E-mail : ********@*****.***

Visa Status: Transferable/NOC available

Position Applied: MECHANICAL ENGINEER (MEP)

Professional Summary

Mechanical Engineer with exceptional problem solving and troubleshooting skills seeking a position in which these skills can be utilized and enhanced for the betterment of the company.

Core Qualifications

Good knowledge in the Installation, Inspection, Testing & Commissioning procedure’s and maintenance of mechanical systems and equipment. e.g. Standby Diesel generator set and MEP services.

Develop Method Statement for Testing & Commissioning procedures, Inspection Test Plan in accordance with project specification, QCS, Local Standards and getting approval from the client

Good knowledge(hands-on) on operations and maintenance of HVAC systems (Air Handling units, Fan coil units & etc. and pumping systems (Centrifugal, Submersible, Irrigation, Booster, Positive displacement pumps), air-compressors, air-dryers, vacuum pumps, calorifiers, heat exchangers, pressurization systems, water filtration systems, water tanks, grease recovery system, mechanical and electrical hoists and fire systems such as sprinklers, hose reels, detection systems, pre-action sprinklers and FM200 etc. in accordance to the fire safety requirements.

Great teamwork abilities on group projects.

Desired to be challenged and accept higher responsibility.

Able to manage maintenance engineers and technician

Experience in Microsoft word - Word & Excel

Analytical thinking and planning.

Problem analysis, use of judgement and ability to solve problem efficiently.

Adaptability to multi culture environment and custom.

Work Experience

1.Testing and Commissioning Engineer (Mech’l) November 2017 up to March 31, 2020

T & C Deparment

Leonardo Security and Information System and PSC Trading and Contracting

LPjv- Joinventure

Doha Qatar

PROJECT – Al Bayt Stadium

Location – Al Khor City

2.Testing and Commissioning Engineer April 2015 up to October 2017

MERCURY MENA ELECTROMECHANICAL

Doha Qatar

PROJECTS:

CP 1 – SW 1 Generator Building

Lusail City, Doha, Qatar

CP 16 – Utility Tunnel Control Center, VIP Access Building

Lusail City, Doha Qatar

QATAR FOUNDATION – QATAR NATONAL LIBRARY, Education City, Doha, Qatar

Responsibilities:

Oversee and Assist in Testing and Commissioning of MEP services and firefighting and getting approval from consultant.

Develop Method Statement for Testing & Commissioning procedures, Inspection Test Plan in accordance with project specification, QCS, Local Standards and getting approval from the client.

Prepare/maintain document register for Testing & Commissioning progress report for Project Manager reference

Validating, verifying and documenting sub-contractor works and submittals per Qatar Construction Standards (QCS) and project specifications.

Coordination and Liaise with construction Team (MEP) for the clearance for Testing and Commissioning of the mechanical system (e.g. AHU, FCU, Submersible pump, Booster pumps & etc.

Raised RFI’s and carried out commissioning inspections and execute commissioning test based on documented procedures in compliance to project specification and Qatar Construction Standards and respond to RFI’s for comments closure.

Carry out site inspections and list issues to be addressed, issuing regular reports to the commissioning department director.

Liaise with QA/QC department for information regarding construction RFIT’s (document register) and readiness to proceed Testing and commissioning work fronts.

Oversight / Manage all mechanical system for Testing and Commissioning and getting approval from consultant.

Fill in/complete all relevant test/commissioning records for all relevant disciplines including all phases of on-site commissioning and SAT.

Compilation of Handover Documents. (As Built Drawings, O&M Manuals and related handover deliverable)

3.Mechanical Engineer Dec. 2011 to Jan 2014

YAMAMA RED BRICKS AND CLAY PRODUCTS

Al Muzamiyah, Riyadh. King of Saudi Arabia

Responsibilities:

Oversee the daily Operation and Preventive Maintenance, Repair, Installation, inspection, Commissioning and Up- grading of HVAC equipment including Air handlers, Chillers, FCU’s and Heating system, Air Quality equipment, Fire water system, plumbing system and drainage system.

Manage the Operation & Maintenance of Diesel Power Plant & Compressor house. (SKL Generator Set, Cummins & Perkins)

Prepares weekly, monthly and annual operations and maintenance reports and reviews discrepancies technical recommendations and plans to improve efficient and economical operation and facility’s conditions.

Perform tests and troubleshoot existing systems. Recommend changes to the system in order to ensure good performance.

Evaluate equipment performance through observation (monitoring) and recommend system modification, if needed to maintain equipment availability and reliability.

Controls of spare parts, maintenance parts, consumable, tools and set track stock level essentials to the operation of plant equipment. Prepare submittals for procurement.

Maintain standard of safety and comply with Company’s Health, Safety and Environment Safety requirements.

4.Site Mechanical Engineer –QA/QC Sept. 2007 to Nov. 2010

ASTALDI ARABIA LTD, Qatar Branch

Doha, Qatar

PROJECTS:

SHELL PEARL GTL TANKAGE PROJECT

Ras Laffan Industrial City, State of Qatar

QATOFIN LLDPE PROJECT

Messaeeid Industrial City, State of Qatar

QATAR ALUMINUM PLANT

Messaeeid Industrial City, State of Qatar

Responsibilities:

Responsible for implementing the Project Quality Plan, ITP and procedures.

Taking care of QAQC documents of the entire project including certificates, calibration, test results, inspection request non-compliance reports and other QAQC related documents.

Responsible for the closure of Non-conformance, NCR and site instruction.

Monitor/Carry out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan, site instruction/observation.

Prepare punch list reports and determine corrective measures for on-site problems.

Develop method statement for the activity including risk assessment, Inspection Test Plan,

Checklist in compliance with project specification, QCS and getting approval from the client.

Liaise with the Client's representatives for the conduct of day-to-day quality related project activities

Perform internal inspection and after verifying the work done, raise Inspection for client/consultant Inspection.

Support/Assist in the preparation for closing out documents to Status A, in submission of materials for approval, request for inspection, shop drawings, As-built drawings, O & M manual.

Ensure equipment body readiness in preparation for Testing & Commissioning activities.

Witness testing & commissioning of HVAC-TAB & Firefighting with 3rd party

Maintain standard of safety and comply with company’s Health, Safety, and Environment safety requirements.

5. Mechanical Engineer March to Sept. 2007

ENGINEERING EQUIPMENT CORPORATION

PETRON BATAAN REFINERY, Philippines (Oil and Gas)

6.Mechanical Maintenance Supervisor Jan 2006 to Feb. 2007

SERVICIO FILIPINO, INCORPORATED

PETRON BATAAN REFINERY, Philippines (Oil and Gas)

Responsibilities:

Installation, Inspection, Testing and commissioning of Plant mechanical services.

Managed the Operation and Maintenance of Diesel Electric Power Plant and sea water pumping stations.

7.Power Plant Supervisor Aug. 1982 to Oct. 2005

Diesel Electric Power Plant

INTERNATIONAL BROADCASTING BUREAU

Embassy of the United States of America

Manila, Philippines

Responsibilities:

Controls the quality of the Operations, Preventive and Corrective maintenance (overhauling). Is carried out efficiently to ensure the availability, reliability, integrity of the power plant.

Carryout and undertake equipment installation, alignment, assembly, fixing, modification of power plant equipment such diesel generators, compressors, pumps, heat exchangers, blowers, Lube Oil Purifier’s (Alfa Laval), cooling towers, sea water pumping station and others.

Preparations of yearly, monthly and daily maintenance schedule to carry out and achieve plant operation a cost effective.

Evaluate equipment performance through observation and recommend system modification and liaising with other key personnel for the purpose of improving operation and maintenance activities and meet targets.

Diagnose fault and troubleshoot engine troubles and performance, carry-out correction/counter measure for every arising abnormality.

Manage and maintain all condition monitoring equipment, including online vibration analysis and thermal monitoring equipment, lubricant sampling equipment, and all lubricant storage, dispensation, recycle facilities.

Control of spare parts, maintenance parts and consumable essentials to the operation of the Power Plant.

8.Mechanical Engineer Nov. 1979 to March 1982

Baguio Gold Mining

Benguet, Philippines

Responsibilities:

Installation, Inspection, Testing & Commissioning, Operation and Maintenance of the

Following underground mining equipment:

Duty/Standby Diesel Generator set

Tunnel Ventilation system

Compressed Air System

Pneumatic Equipment

Above and Underground Pumping Station

Hauling Locomotives

Education

Bachelor of Science in Mechanical Engineering

Professional Qualification

Professional Mechanical Engineer, P.M.E., PRC license # 3566, Oct. 29, 1999

Registered Mechanical Engineer, PRC License # 21156, Oct. 30, 1981

Organization

Philippine Society of Mechanical Engineer, PSME – Life Time Membership

Qatar Chapter

Seminars Attended

TITLE: TESTING COMMISSIONING: FIRE PUMPS, PIPING NETWORKS, CHILLED WATER SYSTEM

CONDUCTED BY: Philippines Society of Mechanical Engineers, Qatar Chapter

Venue: Plaza Inn Doha, Doha, State of Qatar

Date: 6th August 2019

TITLE: NFPA 5000 – BUILDING CONSTRUCTION AND SAFETY CODE

: NFPA 130 - STANDARD FOR FIXED GUIDEWAY TRANSIT AND RAILWAY

CONDUCTED BY: Society of Fire Protection Engineers

Venue: Plaza Inn Doha, Doha, State of Qatar

Date: 4th August 2017

TITLE: SIMPLIFIED PLUMBING CODE – DESIGN AND INSTALLATION

CONDUCTED BY: Philippines Society of Mechanical Engineers, Qatar Chapter

Venue: Plaza Inn Doha, Doha, State of Qatar

Date: 26th May 2017

TITLE: FIRE PROTECTION SYSTEM FOR HIGH RISE BUILDING

CONDUCTED BY: Philippines Society of Mechanical Engineers, Qatar Chapter

Venue: Qatar Grand Palace Hotel, Doha, State of Qatar

Date: 17th March 2017

TITLE: FUNDAMENTALS OF FOAM SUPPRESSION SYSTEM

CONDUCTED BY: Philippines Society of Mechanical Engineers, Qatar Chapter

Venue: Qatar Diabetes Association Auditorium, Al Khali Muntaza, Doha, State of Qatar

Date: 29th January 2016

TITLE: CHILLED WATER SYSTEM DESIGN

CONDUCTED BY: Philippines Society of Mechanical Engineers, Qatar Chapter

Venue: Qatar Diabetes Association Auditorium, Al Khali Muntaza, Doha, State of Qatar

Date: 31 July and 07 August 2015

Contact this candidate