Resume

Sign in

Engineering Engineer

Location:
Sharjah, Sharjah Emirate, United Arab Emirates
Posted:
April 30, 2020

Contact this candidate

Resume:

TONYPHET C. CANTOS

Flat no. *** Building No.*** Email address: adc0vd@r.postjobfree.com

Tourist Club Area, Abu Dhabi, UAE Mobile: +971********* / +971*********

PROFILE AND QUALIFICATION

Competent, professional with a Bachelor of Science Degree in Electronics and Communications Engineering. Successful completion of Project Management Professional Course and Telecom Specialization Course.

Technical knowledge and working experience in: EPC, FEED and Detailed Engineering designs with team management ability.

Involved in Project Management Consultancy (PMC) works and services that includes review and preparation of comments on Vendor, Contractor and Sub-Contractor’s documents and drawings related to Telecommunication, ICT, Security Systems and Corporate Networks.

Preparation of engineering design packages (Conceptual, FEED, and Detailed) for various systems, including but not limited to Data Network System (LAN/WAN) connectivity, security and alarm interface designs, Analog/IP/VoIP, Wireless LAN, SDH/OTN/DWDM/Gigabit Ethernet - Fiber Optic Transmission Systems, WiMAX system, CCTV System, Public Address & General Alarm (PAGA) Systems, Access Control Systems, Perimeter Intrusion Detection System, Video Conferencing System, Paging System, SMATV, SCADA, BMS, VHF/UHF System, TETRA, PABX Systems, Office and Field Telephone Systems and provision of communications connectivity and interfaces for SCADA metering systems and Power Substations.

Team supervision, technical assistance, and as team member in the preparation of engineering design packages. Coaching junior engineers and coordination with superiors and other disciplines.

Knowledgeable with the telecommunications standards and specifications of ADCO, GASCO DGS, Saudi Aramco, Kuwait Oil Company (KOC), Shell DEP, EIA / TIA, Building Industry Consulting Service International (BICSI), Premises Distribution System (PDS), Belden/CDT Structured Cabling System, and good familiarity with other international industry standards.

Conducts inspections and Testing’s, involved in FAT, SAT, Mechanical Completion, and Commissioning activities.

Review contract documents and requirements for project execution, organize and prepare the Technical Document Register, MS, telecom equipment specification, data sheets, cable routing and all telecom related documents / drawings.

Identify the requirements, scope of work and all related documents, drawings and diagrams.

Other responsibilities, field survey and verifications, technical review, project meetings/coordination, preparation of work progress/status reports, preparation of project technical and commercial proposals and preparation of design packages.

Excellent knowledge and experience with design Installation, testing, commissioning and maintenance activities of various wired and wireless telecommunication systems.

Experience in coordination with various subcontractors, vendors and suppliers and system integrators involving communications products, systems and technology, assistance on purchase requisitions, request for quotations, bidders/Vendors evaluation and subcontracts. I have a better understanding of specific Engineering discipline and inter-disciplinary activities as well as coordination with building services, architectures and structural designs.

Capable to supervise installation team, technicians and contractors meet standards and time lines & ensures HSE policies adopted at all levels. Proven ability to perform well under pressure with excellent leadership, multitasking capabilities, management and problem-solving skills. Good communication skills.

WORK EXPERIENCE

FORTUNE ENGINEERING AND ENERGY SERVICES Abu Dhabi, UAE March 2019 to Present

Position: Lead Telecommunications Engineer

Review contract requirements for project execution, participates in the preparation of the Technical Document Register (TDR), identify requirements and scope of work; Specifications, Calculations, Drawings, Philosophies and other relevant documents.

Performs detail engineering designs and review of telecommunication and ICT systems.

Prepares and performs Technical Bid Evaluations.

Direct & supervise a team of relevant discipline engineers. Responsible for providing expertise and ensures the application of correct standards in all FEED/EPC deliverables in the design and development of projects associated with Oil & Gas processing, production and export.

Participate in key design reviews such as HAZID, HAZOP, model reviews, etc. Prepare, review and approve relevant discipline design and analyses reports.

Involved in Factory and Site Acceptance Tests as well as material delivery checks, verification, and inspections. Prepare the documents related to the tests to be carried out at Vendor premises or other location.

Meet with vendor representatives, inspect vendor works and workshops, provide dispatch clearance and test certificates.

Co-ordinates with the client about Telecommunications Regulatory Authority (TRA) of UAE for frequency and radio licenses issues of telecommunications equipment, and Etisalat for telecom related issues.

Coordinates with other engineering disciplines to ensure proper integration of the systems.

Permanently liaise with Start-up Team for Field Operations personnel participation to testing and witnessing of the activities

Plan, Monitor and assists telecom system integrator’s activities as required.

Act as project representative for the discipline during meetings with project team, customer discipline lead and relevant regulatory agencies such as certifying authorities, auditors, third parties, etc.

Complete involvement in the engineering, construction and commissioning stages of the following projects:

Responsible for executing all aspects of telecom related scope delivery and optimization of the design in the most cost-effective manner.

Aside from being part of the Proposal Team, below are the list of the telecom/ICT projects:

I.EPC FOR PROCESS CONTROL & POWER SYSTEM UPGRADE/ REPLACEMENT AT BAB (ADNOC – Onshore)

Telecommunication Systems:

Wireless Communication (WiMAX)

21 Locations (Base Stations)

114 Subscriber locations

Transmission System (SDH/PDH)

23 SDH Nodes

Fiber Optic Network (Backbone)

Direct Buried and via OPGW

Telephone and Data LAN Systems

Extension of Existing Corporate LAN with full pledge NMS (perpetual license), IP & analog telephones

Implementing Cyber and Network securities.

II.REPLACEMENT OF OBSOLETE SALES GAS METERING SYSTEMS – (ADNOC – Gas Processing)

Telecommunication Systems:

Modification works of the existing SDH System and RTU interface requirements

12 Consumer Receipt and Valve Stations

PENSPEN INTERNATIONAL LIMITED Abu Dhabi, UAE December 2013 to March 2019

Position: Sr. Telecommunications Engineer

Preparation of Telecom FEED documents / drawings and Project Management Consultancy (PMC)

Detailed engineering design and review of telecommunication and ICT systems.

As an Engineering Consultant, provides expert advice, construction and commissioning support to field implementation team.

Responsible for executing all aspects of telecom related scope delivery and optimization of the design in the most cost-effective manner.

Performs planning, managing, prioritizing and scheduling the workload and various project activities related to discipline scope.

Reviews alternative methods and solutions for complex telecom engineering problems and selects the most efficient and economical option to achieve the design objectives and international standards.

Responsible for telecom related engineering activities and deliverables, modeling inputs, project reporting and design integrity checks/reviews to ensure that all key issues are identified and mitigated.

Review contract requirements for project execution, participates in the preparation of the Technical Document Register (TDR), identify requirements and scope of work; Specifications, Calculations, Drawings, Philosophies and other relevant documents.

Coordinate with projects and planning of project time schedules, establish target completion dates, ensure target dates are achieved.

Identify the scope of work & requirement and accordingly plan/schedule the engineering activities and manpower resource. Identify and quantify the total number of engineering deliverables, man-hour allocation, time schedules and other requirements for execution of the work.

Plans and organize the issuance of telecom related engineering drawings and technical documents for Inter-Discipline Checks (IDCs) coordinate with other engineering disciplines in the integration of data inputs. Provide telecom related inputs for the preparation of plot plans.

Review the ITB (Invitation to Bid) documents submitted during the proposal stage, issue inquiry requisitions, review vendor offers, prepare equipment, material and man-hour estimates

Preparation of technical queries to vendors/client, participate in the technical evaluation of vendor bid offers. Prepare and review Technical Bid Evaluations (TBE), review vendor drawings and documents. Supervise the review of design calculations, ensure vendor equipment specifications meet with client equipment specifications, project requirements and are within budgeted costs.

Coordinate the preparation of Purchase Requisitions for the procurement of equipment and materials. Ensure materials are obtained within scheduled timeframes and budgeted costs.

Interact with Quality Assurance for quality issues; strictly ensure compliance with Company’s ISO Quality procedures. Coordinate Internal and Client audit requests; facilitate audit procedures of engineering systems within the department.

Interface and provide clarification and guidance and technical support to construction sites and commissioning engineers, provide start-up assistance as required.

Perform and check calculations, specify equipment, and solving moderate to complex engineering problems.

Experienced working with remote engineering offices, on/offshore, site verification and data collection.

Projects Handled:

I.PMC services for Abu Dhabi National Oil Company – Onshore in Fujairah, United Arab Emirates. Expansion of the Main Oil Terminal.

Activities includes: review comments and approval of engineering design packages and providing assistance relating to telecommunications scope of works from the Main Contractor and Detailed Engineering Sub-Contractor along with its telecom system integrator for all the related telecom activities that includes the following:

Expansion of the existing telecom systems such as CCTV, PAGA, Access control system, Corporate LAN/WAN, voice and data, backbone Fiber Optic Cable and ICSS.

Reviewing and approval vendor/system integrator deliverable documents and drawings.

Coordination and discussion of issues and resolutions with ADNOC IT Department.

Attend project coordination and design review meetings as required.

II.CONSULTANCY SERVICES FOR LIGHT PRODUCTS TRUCKS LOADING RACK AT ZARQA REFINERY – Jordan Petroleum Refinery Co. Ltd.

Carry out the Basic Engineering Design and the FEED Services.

Preparation of detailed telecommunication system engineering design for Telecommunication systems that includes CCTV, PAGA, FOC, Access Control, Automatic gate barrier and Voice and Data LAN systems.

III.FEED STUDY FOR NEW BMS SYSTEM WITH AUTO IGNITION AND INDEPENDENT FLAME SCANNERS FOR ALL HSK/ HCK HEATERS AND REFORMER - ADNOC Refining, Abu Dhabi UAE

Coordinates the implementation of project procedures including design.

Coordinates the review of design documents by the design team and other stakeholders; ensuring tracking and incorporation of comments by the design leads

Coordinates systems engineering activities including requirements management, interface management, design risk management and HAZOPs.

Addresses and solves day to day project coordination challenges supporting the PM in the identification, logging, analysis and resolution/mitigation of issues and risks

Assists the PM in cost and schedule control in conjunction with the Project Controls Lead

Coordinates submission of invoices/timesheets to the Client

Coordinates document management for the project. Coordinates with the Document Control Lead the submission (transmittals) and retention of project documents

Assists in the preparation of proposal/project meetings (internal and external stakeholders); Issues minutes of meetings and creates an action Items log and follows up with the responsible persons for close out of action items

IV.FEED for New MP Boiler, New DM Water Plant and Associated Facilities at Qatar Petroleum Refinery, Qatar

Telecom FEED designs for the new LER as part of the project. Telecommunication system involves backbone of Fiber Optic Cable from the existing control building to the new LER to cater the extension of the existing ELV/ICT system such as QP’s converged LAN, CCTV, Access Control system and IP telephone system.

V.Fuel farm complex and hydrant at Bahrain International Airport

Residual engineering scope for telecommunication systems such as CCTV, Public Address, IP telephone and Data LAN systems.

VI.Detail Designs for the Instrumentation & mechanical modification works at BAB and ASAB – ADCO, United Arab Emirates

Detailed engineering design for the Extension/modification of the existing SDH network to provide Office LAN and IP telephone connectivity’s to Remote Stations RMS-1, RMS-4, RMS-5, RMS-6 and OGD-0, OGD-I, OGD-II receiver areas.

VII.EPC Jurassic production facility at East Raudhatain and Sabriya – Kuwait Oil Company

Detailed engineering design for telecom system that involves CCTV and Public Address and General Alarms Systems.

VIII.EPC Work for HP Connection to NGV Filling Stations (PHASE 2A) – GASCO, United Arab Emirates

Detailed engineering design for the facilities. Telecom system involves CCTV, IP Telephone, backbone of Fiber Optic Cable, Field instrument interfaces and MPLS connection via Etisalat for the required connectivity to the main control room in Maqta.

IX.FEED Consultancy services for the construction of aviation fuel depot at Bateen Airport – Abu Dhabi, United Arab Emirates

Preparation of FEED designs, specifications and scope of work for the installation of new telecom systems such as CCTV, IP Telephone, Public Address and Data LAN Systems.

X.Design Consultancy services for construction works in Al Ain Zakher, Saneyah, Mussafah, Madinat Zayed and Dhow Harbour Depots (ADNOC Project - Package 2 & 3)

Scope covers the preparation of Conceptual design, FEED and detailed engineering design of telecommunication system for EPC. Design includes backbone FOC’s, and expansion of the telecom system such as CCTV, PAGA, Telephone and Data LAN systems.

Prepares FOC core allocation & cable schedules, MTO and BOQ, telecom equipment list, functional specification, datasheets and scope of works, comment compliance sheets, etc.

XI.FEED and Design Adequacy Study of Existing Facilities for Yas Mina Zayed Gas Pipeline - GASCO, United Arab Emirates

Preparation of FEED designs, specifications and scope of work for fiber optic network, Extension of CCTV, IP-Telephone Systems, fiber optics and SDH tie-in details.

Coordinates with other system and vendors to ensure successful interfaces.

XII.Design and Upgrade of Fuel Gas Supply System and Fuel Supply Infrastructure within Ministry of Electricity and Water (MEW)- Kuwait

Performs detailed telecommunication system design for the new Control Building in MEW’s 6 existing Power Stations.

Preparation of EPC designs for a standalone BMS, an extension of existing Data LAN network and IP-PBX systems.

XIII.Design of the new security building of Dolphin Energy in Taweelah Receiving Facilities - United Arab Emirates

Preparation of conceptual and FEED telecommunication system engineering design for EPC. Telecom system includes CCTV, Fence Intrusion Detection, IP Telephone, FOC, Access Control, Automatic gate barrier and Voice and Data LAN systems.

XIV.Detailed engineering services for installation of third drinking water mixer and bromate free hypochlorite package - GUP, TAKREER Ruwais, United Arab Emirates

Preparation of detailed telecommunication system engineering design for EPC. Telecom system includes PAGA, Telephone, FOC and Voice and Data communication network.

Attend to project coordination meetings, site surveys, prepare minutes of meetings and provide assistance to the project manager.

XV.Buhasa Thamama Zone ‘B’ Development Enhancement Phase 1- ADCO, United Arab Emirates

Preparation of detailed telecommunication system engineering design for EPC. Design includes OPGW, UG FOC and SDH/PDH system for Voice and Data communication network.

Prepares FOC core allocation & cable schedules, MTO and BOQ, telecom equipment list, functional specification and scope of works, comment compliance sheets, etc.

XVI.EPIC for Gas Supply to Ras Abu Fontas (Raf) Power Stations – Qatar Petroleum, Qatar

Detailed telecommunication system engineering design for telecom facilities for EPIC project. Telecom system involves backbone of Fiber Optic Cable from Station W2 to Station T21 to cater the installation of Fiber Optic Communication System using Gigabit Switches, CCTV, Access Control system, IP telephone system, an extension of analogue telephone lines and main IT (Cisco) converged LAN.

XVII.Consultancy Service for Yas-Mina Zayed Gas Pipeline – GASCO, United Arab Emirates

Worked within the client’s Engineering/Consultant team.

Review and prepare comments for documents and drawings from project sub-contractor.

Provides presentations and coordination for design. Review of design criteria, drawing standards and conventions, project specifications, and design guidelines with respect to telecommunications.

Attend periodic project coordination and design review meetings as required.

Participation to project coordination meetings and various vendors’ product and system presentations.

XVIII.PMC services for Abu Dhabi Marine Operating Company (ADMA-OPCO) for the execution of project Additional Gas Supply to Onshore & Flexibility Assurance at USSC.

The project intends to transfer additional gas from the Umm Shaif (US) field to Habshan through Das Island.

Support and services activities include review comments and approval of engineering design packages and providing assistance relating to telecommunications scope of works from Main Contractor National Petroleum Construction Company (NPCC) and Detailed Engineering Sub-Contractor (Technip Abu Dhabi) along with its telecom system integrator TYCO Fire & Security UAE LLC for offshore platforms and wellhead tower operations at Umm Shaif Super Complex facilities that includes the following:

1.Installation of offshore telecom backbone Fiber Optic Cable for various telecommunications system services required for project

2.Installation of analog and IP Telephones (Indoor& Outdoor), IP CCTV, PA/GA, conventional VHF/UHF and Tetra Radio including crane facility telecoms and security systems.

Reviewing and approval vendor/system integrator (TYCO) deliverable documents and drawings.

XIX.PMC Service for the Design, Detailed Engineering, Supervision & Project Management for the Expansion of Aviation Fuel Depot at Abu Dhabi International Airport – ADNOC, UAE

This project involved the expansion of the existing ADNOC fuel depot. The project involved replacement of existing control system with new ESD system, F&G system, FACP, F&G Devices, data sheet, F&G Layouts, F&G system interconnection, Control System, MOV master control station, PA/GA, CCTV, HAZOP work shop etc.

The project required to carry out all the change over from old system to new system without affecting the day to day operations. The project included extensive site survey of the existing facilities and all documents/ drawings related to the detail engineering.

Review and prepare comments for documents and drawings from project sub-contractor.

Prepare Telecom Philosophy, Design Basis and other Telecom related documents and drawings

Prepare/Review Telecom Specifications, Data Sheets & Diagrams.

Guide Designer for Telecom related drawings and layouts and Provides presentations and coordination for design.

Review/Prepare Material Requisitions, Technical Bid Evaluation and other vendor documents.

Resolve site’s Technical Queries

Review and provide suggestions to QA/QC procedures relating to telecommunications requirements. Provide evaluation and analysis in regards to tenders as required for telecommunications systems.

Review of design criteria, drawing standards and conventions, project specifications, and design guidelines with respect to telecommunications.

Attend periodic project coordination and design review meetings as required.

Participation to project coordination meetings and various vendors’ product and system presentations.

Review engineering design package and provide assistance to telecommunication scope.

XX.Installation of Telemetry System for Monitoring and Control of Consumers Network System - Kuwait Oil Company

Preparation of Detailed Telecommunication system engineering design for FOCS Network/DWDM, a Fiber Optic Based Telemetry System.

Work within the PMC’s Core Engineering Team/PMT project team

Review of design criteria, drawing standards and conventions, project specifications, and design guidelines with respect to telecommunications.

Attend periodic project coordination and design review meetings as required.

LARSEN & TOUBRO LIMITED Abu Dhabi, UAE November 2011 to December 2013

Position: Telecommunication Engineer

Responsibilities:

As a Telecom Engineer and Job Performer (ADCO-PTW holder), I am responsible for the project execution related to telecom systems that includes: Design verifications, conducts toolbox talks, supervise the installation, testing, inspections & mechanical completion, pre-commissioning and commissioning of the entire telecommunication package.

Performs Factory and Site Acceptance Tests as well as material delivery checks, verification, and inspections. Prepare the documents related to the tests to be carried out at Vendor premises or other location.

Review contract requirements for project execution, vendor deliverables, organize & preparation of the Technical Document Register.

Prepares PTW permits, Method statements, Task Risk Assessments, and Technical Queries.

Closely working with Consultants & Clients on the project scope, document issues and progress.

Meet with vendor representatives, inspect vendor works and workshops, provide dispatch clearance and test certificates.

Co-ordinates with the client about Telecommunications Regulatory Authority (TRA) of UAE for frequency and radio licenses issues of telecommunications equipment, and Etisalat for telecom related issues.

Oversees a team of highly qualified engineers and technicians as well as contractors throughout the installation, testing and commissioning including the installation of the 70-meter telecom tower and Active shelter integration.

Coordinates with other engineering disciplines to ensure proper integration of the equipment especially SCADA, PLC’s, RTU’s and Flow computers.

Focal point for all telecom issues. Supervise contractors to ensure HSE policies/procedures adhere.

Lead a team to undertake testing and commissioning activities. Review of all PC&C documentation, procedures, drawings, etc related to the equipment to be tested.

Organize the witnessing of Pre-commissioning activities

Implement & test telecom system as per project commissioning test sheets. Ensure temporary supplies and commissioning spares are adequate for the system testing.

Assists Pre-commissioning and commissioning dossiers management.

Initiate and follow up clearance of Punch List, highlight technical problem encountered and provide technical expertise to speed up PL clearance.

Approve the test records and verify updating on ICAPS database accordingly.

Ensure that the Commissioning Red Line Mark-up is done on relevant drawings and documents

Permanently liaise with Start-up Team for Field Operations personnel participation to testing and witnessing of the activities

Plan, Monitor and assists telecom system integrator’s activities as required.

Act as project representative for the discipline during meetings with project team, customer discipline lead and relevant regulatory agencies such as certifying authorities, auditors, third parties, etc.

Complete involvement in the engineering, construction and commissioning stages of the following projects:

Project handled:

I.Abu Dhabi Company for Onshore Petroleum Operations Ltd. (ADCO) as Telecom Project Engineer for the Telecommunication system package in Construction of BQ Station facilities, RDS-1 and 16-inch Transfer Line Project with 15 oil wells and 10 water wells.

ADCO Telecom system includes:

3.Wireless System (Wimax connectivity for 25 Water and Oil Well Head Sites)

4.UHF Digital Trunk radio System (Motorola MTR 3000)

5.SDH network - Fiber Optic based (General Electric STM 1/4 - 155 / 622 Mbps)

6.Fiber Optic Cable laying, splicing, termination and testing.

7.CCTV System (Pelco - Explosion proof with washer tank)

8.PAGA System (GaiTronics)

9.PABX System (NEC-NEAX 2400 IPX, FHF and Cybiotronics)

10.Network & structural Cabling and UPS System

11.Active and passive cooled shelter / Telecom Tower Erection/Installation, Commissioning & Verticality Test

Recognition: Received a certificate from the client for being the “Best JP (Job Performer)” of the year.

II.Abu Dhabi Gas Industries Ltd. (GASCO) as Telecom Project Engineer for HRS Gas Pipeline Project

GASCO Telecom system includes:

1.Fiber Optic Cable laying, splicing, termination and testing.

2.Fiber Optic based SDH network ( KeyMile STM 16 – 2.4 Gbps)

3.CCTV System (Bosch Explosion proof with washer tank)

4.Passive cooled Shelters

CONSOLIDATED GULF COMPANY Doha, Qatar July 2005 to August 2010

Position: Telecom Engineer

Manage assigned site project activities and ensure project execution is carried out in a safe manner as per project scope and design requirements.

Responsible for installation, testing and commissioning of telecommunication projects such as TETRA, Corporate network and structured cablings, ELV, PBX, audio/video rooms and Security Systems (including radio licenses application and Qtel process) as well as maintenance in Qatar Petroleum (its subsidiaries).

Work along with contractor’s project management teams to ensure thorough understanding of the project objectives and priorities thus meet project objectives.

Understand the detailed engineering drawings and documents to ensure site jobs are carried out accordingly.

Prepares a comprehensive plan for implementing End-to-End IT & Telecom infrastructure projects.

Act as the focal point of contact for site project issues; review and resolve day to day site project concerns.

Generate site activity reports for all involved site activities, assures all site documentations are up to date and contributes to set technical stands to improve repairs, maintenance and system reliability.

Perform pre-FAT/IFAT, Mechanical Completion, and SAT (including punch list completion).

Responsible for planning, scheduling, conducting and coordinating the technical and management aspects of projects. Report immediately any unexpected event which may affect the commissioning activities

Participate in client/contractor meetings and resolving client/engineering and management project issues.

Develop engineering documents (Method statements, calculations, etc.) and drawings of various Telecommunication projects, coordinate and checks engineering deliverable.

Oversee project engineering schedules and forecasts.

Complete all assigned tasks as delegated by the Commissioning and Project Managers.

Extensive usage of various types of bench test equipment from basic voltage, current and component testers to power supplies, probes, RF signal generators and Analyzers.

Experienced user of Fiber optics Fusion splicer, OTDR, CCTV and Video equipment and a variety of telecommunication and network equipment.

Skilled user of surface mount servicing tools such as tweezers, flux, solder wick, soldering (de-soldering) iron, hot air and other electronic repair activities including device repairs and exchange of mechanical and complicated IC’s (Integrated Circuits) electromechanical defects or parts down to component level, logical fault finding, measurements and Rx and Tx calibration tunings. Following proper procedures and instructions and diagrams. Utilize prints, schematics, service manuals, and test equipment to analyze problems.

Certified Level 1, 2 and 3 Nokia Repair and fault diagnosis technician. Parts of the responsibilities are: Update and upgrade mobile phone, Tetra radio software.

Plans and supervise the routine/planning of maintenance activities, tests and modifications for various telecom systems and provides technical support for On-Site monitoring.

Telecom system handled includes:

1.CCTV System (Pelco, Bosch and Spectator)

2.PABX System, Structural cabling and Networking for voice and data (Siemens)

3.WiMAX System (Airspan)

4.UHF Radio System (Motorola, Sailor and Jotron)

5.Satellite phones (Thuraya)

6.TETRA System - Base station and repeater

7.Audio/Visual System (Crestron and Extron)

8.Telecom Dispatcher (Zetron DCS)

Key projects:

1.Zetron DCS Dispatcher installation (Mesaeed and Ras Laffan, QP Emergency and Control Rooms)

2.Siemens PABX System Installation Project in Qatar Petroleum, Ras Gas, Qatar Gas & Dolphin Energy

3.TETRA Radio, base stations and dispatcher installation and maintenance Project in Qatar Petroleum

4.UHF System in Qatar Petroleum – Messaeed, Ras Laffan and Dukhan

5.Audio/Visual, Emergency and Conference Room Project in QP-Ras Laffan and Messaeed

6.Nationwide TETRA



Contact this candidate