QA/QC MECHANICAL ENGINEER (MULTI)
Human Resource Department
Dear Hiring Manager
I am a B.E Graduate from Anna University Chennai, India and a TWI Certified Welding & Painting Inspector (CSWIP 3.1 & BGAS Grade 2) & have 09+ year of experience in WELDING &PAINTING OF STRUCTURAL STEEL & PIPING, TANK, and Inspection Field like the fabrication, construction in Oil and Gas plants, Chemical Plant, Petrochemical Plant, Fertilizer Plant,Cement Plant and Fabrication shop. I have
09 + Years of Experience.
07 shutdowns Experience.
Certified Welding Inspector (CSWIP 3.1 Cert #316179) Certified Painting Inspector (BGAS Gr. 2 Cert #354114) ASNT Level II for UT, PT, RT, MT.
QMS Internal Auditor (A18189) (Based on: ISO 9001:2015) Will join immediately
Hoping for a Positive Response
Thanks & Regards
Mobile: +91-780******* (INDIA)
Present Address: Madurai,India
I. B.E.Degree in MECHANICAL ENGINEERING from.
PSR ENGINEERING COLLEGE Affiliated to ANNA
UNIVERSITY (A.U), CHENNAI, INDIA and approved by ALL INDIA COUNCIL FOR TECHNICAL EDUCATION in 2006 – 2010 batch.
Certified Welding Inspector(CSWIP 3.1 Cert #316179)
Certified Painting Inspector(BGAS Gr. 2 Cert #354114)
ASNT Level II for MT, PT, UT and RT
QMS Internal Auditor (Cert # A18189) (Based on: ISO 9001:2015) CAREER ABSTRACT
09 Years of Experience as a MECHANICAL QA/QC ENGINEER (Welding /Painting) JOB PROFILE 1
Jan 2015 to December 2019 date with Danem engineering works, Qatar as a MECHANICAL QA/QC ENGINEER (2015-2019).
Project 1: Ethylene Pipeline intelligent Pigging Project
Client: Baker Hughes & Raslaffan Olefins Company(RLOC) Job Description: Fabrication,Testing & installation of LTCS,SS & CS Pipeline in Ethylene unit.(Material inspection, NDT testing, PMI test on SS mat weld area &HAZ, Hardness testing, PWHT, Hydro testing)
Project 2: Replacement of Cross over Piping in Ethylene unit at Qatar Chemical Plant Client: Qatar Chemical Company (QChem)
Job Description: Fabrication & installation of SS304H material crossover Pipe replacement in Ethylene unit.(Material inspection,NDT testing,(DPT & RT), PMI test on SS weld area &HAZ, Hardness testing, Solution Annealing test,Pneumatic testing)
Project 3: PE Reactor Train 1 & 2 CTO Flash line repair of jacketed spools at Qatar Chemical Plant
Client: Qatar Chemical Company (QChem)
Job Description: Repair of steam jacketed spools, provide impingement plate and install in PE Reactor during shutdown.( Material inspection,NDT testing,(DPT & RT),Hydro test for inner pipe line & outer pipe line).
Project 4: QAFCO Plant 1&6 shutdown February 2017
Client: Qatar Fertilizer Company (QAFCO)
Job Description: Replacement of condenser, Reformer Header, Related piping’s (LTCS, inconel,SS,CS..)Replacement of Equipment’s, valves, pressure testing, vacuum testing etc...
Project 5: Replacement of GT 1,2 and Refurbishment of GT 3,4 &5 and supply of GT6 New steel structure in QAPCO
Client: Qatar Petrochemical Company (QAPCO)
Job Description: Fabrication and Painting of New steel structure.(TCC, Air inlet filter, Duct support, Lube oil cooler, Enclosure ventilation, IBH Platform).
Project 6: Qatar Chemical Plant - Turnaround Shutdown
Client: Qatar Chemical Company (QChem)
Job Description: Replacement and Repair of Convention coil in Ethylene Unit Related Piping, NDT testing, Preheat and PWHT, Hydro testing.
Project 7: QP Refinery Plant- 4903F Amine storage tank ( total of 7.5M height & 6.5M tanks in diameter)
Client: Qatar Petroleum (QP)
Job Description: Fabrication and Painting of 4903F Amine storage tank(Stainless steel),PMI test, NDT testing, Sump oil chalk test, bottom &Roof plate vacuum box test, Pneumatic test and Hydro test. Tank internal & bottom coat inspection, Holiday test.
Project 8: Umm Al Houl Power plant-Structural steel
Client: Acciona Auga /Hitz
Job Description: Fabrication and Painting of structural steel (RO Rack).
Project 9: QPMC Cable Bridge
Client: QPMC /FL SMIDTH
Job Description: Fabrication, Painting and Installation of Cable bridge 60 metre long.
Project 10: Steam traps with associated piping for Steam and condensate line at Qatar Chemical Plant (CS Piping)
Client: Qatar Chemical Company (QChem)
Job Description: Fabrication and installation and testing of CS Pipe line ( Material inspection,NDT testing,(DPT & RT),Hydro test,Painting holiday test,& insulation). JOB PROFILE 2
September 2012 to Octember 2014 with Fabcon industrial service FZ llc, UAE as a QC Engineer (2012 - 2014)
Project 1: Waste water Recovery power plant
Client : Gulf Cement Company.
Job Description: Fabrication and Painting of New structural steel (2500 MT).
Project 2: Emarites Aluminum Plant
Client : Emal/Coperion
Job Description: Fabrication and Painting of Silos and Hoppers
Project 3:JK Cement plant
Job Description: Fabrication and Painting of Cyclone,Duct,Hopper,Exhaust Stack,Deduster,Chutes
Project 4 :Gas Turbine Air Intake Filter system Module Client :Donaldson
Job Description: Fabrication and Painting of intake filter &Ducting revamp (PP3& Mekkha Module)
Project 5 : Swage Rectangular water tank
Job Description: Fabrication, Painting and Hydro testing of swage rectangular water tank (12M Long, 7.4M Height)
JOB PROFILE 3
June 2010 to May 2012 with Plustech Fabrication Pvt .Ltd, India as a QC Engineer (2010
Project 1: MHN Process platform and living quarters (Offshore Platform)
Client : ONGC
Job Description: Fabrication of Platform structural steel –cellar deck, main deck, sub cellar deck, mezzanine deck (5600 MT).
Project 2: Booster Compressor Module Project (Offshore Platform)
Client : ONGC
Job Description: Fabrication of Platform structural steel –cellar deck, main deck, sub cellar deck, mezzanine deck (2400 MT).
Well experienced with Preparation and implementation of Inspection Test Plan (ITP).
Preparation of PQR Test for various welding process like SMAW, SAW, GMAW and GTAW.
Prepare PQR, WPS, and WQT Procedure for client approval.
Witness Mechanical testing (Tensile test, Bend test, Charpy v-notch test, Hardness etc.)
Prepare and review of material traceability, weld map, weld summary sheet, punch list, test pack and Material approval submittal (MAS) .
Witnessing of welder qualifications testing and procedures qualification testing and Qualification and Training of Welders in accordance with ASME SEC IX, AWS D1.1 and Client Specification.
Witness and verify NDT method MT, DPT, RT, UT and review its reports.
Monitor the Shop and Field fabrication activities to ensure that the works been execute according to the specification and standard.
Knowledge about various standards and specifications (ASME B 31.3, AWS D 1.1 and ASME Sec IX, API 650).
Review of all applicable documents such as scope of work, Drawing, Quality plan, Procedures, codes & standards.
Inspection of material and welding consumables (Dimensional check, Heat number, Grade, etc.)
Carryout material inspection and also reviewing MTC with relevant standards and Review PMI test value.
Stage wise inspections like (Material identification, checking of fit ups, visual inspection of weld, Non-destructive testing).
Evaluating the results with relevant codes and standards for the NDEs, PMI, PWHT, Hardness tests etc.
Monitored Pre Heat/PWHT (Post Weld Heat Treatment) and Solution Annealing Heat treatment examination and Reviewed PWHT charts in accordance with client procedure and specification
Line walk and Punch list preparation before Hydro test.
Torqueing and Hydro testing activities as per Project Requirements
Maintaining and monitoring of all involve equipment’s used in welding control and others that properly identified and calibrated as per procedure.
Review of Mech completion- Welding/NDT-Approval of test pack –calibration certificate of Pressure gauges, PRV, Chart recorder.
In-process inspection and control of product non-conformities, Documentation, Conducting Third Party/Client’s inspection and review.
Conducted load test with TPI for the lifting leg of Man basket, Material basket, Coil stand etc.
Carryout inspection as per RFI (Request for inspection).
Preparation of Inspection Report and Final Document for Dossier.
Painting / coating inspection of steel structural works, pipeline, pressure Piping, Tank External and internal coating.
Final Inspection of Surface preparation and Application Documentation, Monitoring weather specified conditions check the Ambient Temperature (wet / dry), Dew Point and Relative Humidity before the commencement of work.
Prepare “inspection & test plan” (ITP) for specific project / company requirements/ surface preparation and painting / coating procedure.
Hot dip galvanizing coating inspection.
Co-ordinate with the paint manufacturer technical representative on daily basis & Check with proper storage of coatings as per manufacturer’s data sheet.
Check the Abrasive before starting of the Blasting.
Surface preparation, Conducting salt test on surfaces inspection
Familiar with all painting inspection tools and inspection activities (DFT, WFT, Surface Profile gauge, Holiday.)
Visual inspection, Dimensional check, Material Identification, Mechanical Test, fit-up inspection, Non-destructive Testing, Torqueing,surface finish, surface preparation, Painting inspection, Assembly check, Hardness test of pipe, PMI test for material,weld joint, HAZ etc
Date of Birth : 04th May 1989
Gender : Male
Marital status : Married
Father’s Name : Lakshmanan
Nationality : Indian
Passport No : J5663628
Permanent Address : 88 Velmurugan Nadar street,Mamsapuram (PO)-626110.Tamil Nadu, India
Communication Skills : English, Tamil, Hindi and Malayalam DECLARATION:
I do hereby declare that the particulars of information and facts stated herein above are true, correct and complete to the best of my knowledge and belief. PLACE:
DATE: NAME: Paramasivam.L