ALJOHN VELASQUEZ

**** ** *** ** ********, Alberta, Canada T6X 1T6

780-***-****

adbq5w@r.postjobfree.com

SUMMARY AND HIGHLIGHTS

Result oriented and highly motivated person with more than 6 years of experience in Quality Assurance/ Quality Control inspections on construction projects, mainly focused on water treatment facility – from Fabrication, Installation/construction and Commissioning. Primary inspection responsibilities are monitoring, supervising and appraising Contractor’s / Sub-contractor’s fabrication, construction and installation performances in the area of quality control assurance including evaluation of materials and procedures in accordance to applicable project specifications. Worked hand-in- hand with third party engineers/clients/owner to ensure smooth work flow and efficient organizations operations.

Such inspection responsibilities includes: monitoring and checking the quality works in the areas of mechanical, structural, piping, welding, pressure vessels, pipelines, tanks, protective coatings, corrosion control, insulation, non-destructive testing, hydro-testing including adequate knowledge in civil, instrument and electrical. Prepare inspection reports and issue non-conformance reports and analyze root causes and evaluate the proposed solutions.

Other responsibilities are support to commissioning of plant and equipment utilities, preventative maintenance, condition monitoring and handover of documents, familiarity on designated contract specifications ; assist in the implementation of safety and environmental protection programs and provides data required on project progress.

SKILLS

Project Management Skills

Supervisory Experience and Multidisciplinary exposure Good Communication Skills and Strong interpersonal skills Advanced Computer Skills

Familiarity with weld inspection process

Proficiency at reading Isometric P&ID

Engineering drawings/standards : ASME Standards

Knowledgeable in construction safety

Good Judgement

WORK EXPERIENCE

Company: SIDEM supplied to OTV-Veolia

20-22 Rue De Clichy, 5009 Paris France, PO Box 3609, Abu Dhabi, UAE Position: QA/QC Engineer/Inspector

Duration: September 26, 2017 – December 06, 2019 (BWSIP Project 3 & 4 Basra, Iraq) QA/QC Engineer

o Supervises on the QC functions of the project including QC for Inspection. o Supports Site Manager and Construction Manager in dealing with client for all the Quality matters. o Evaluates qualifications of welders and NDT Personnel with regards to activities assigned. o Supports and Participates in all external/internal audits. o Coordinates relevant tracking systems for correct identification of materials. o Review and Evaluation of all equipment calibration management activities submitted. o Coordination with Contract Managers for specific contractual agreements on quality works. o Assesses ITPs, Reports, Documentations and Test results submitted by Consortium Company o Assessment and analysis of all Non-compliance together with Site QC Personnel and providing solutions and closing out on issues.

o Assessment of all Field Inspection Reports (Civil, Electrical, Mechanical and Instrument) and closing out on issues.

o Assessment of all Site Queries of Consortium Company and coordinating with Paris head office. o Preparation of Data Base for NCR Non-conformance reports, FIR Field Inspection Reports, SQ Site Queries, MR Material Requests, Reworks and Modification Registers and providing/coordinating weekly update for the site team. QA/QC Inspector

o Perform Daily Inspections on all Mechanical Activities to achieve the quality of Construction required in the drawings and project specifications for all works under contract. o Carry out inspections and checking for all quality related procedures on site and ensures activities are as per approved method statement/specifications and as pre inspection test plan. o Coordination with Consultant and Client during joint inspection. o Taking care of all QA/QC Documents of the entire project including test certificates, calibration, test results, NCRs, Letters/Site Instructions by Client/Representative. o Develop risk assessment and job safety analysis prior to inspection and assurance of all ITPs and Checklists are being followed by Consortium Company as based on specifications and contracts. o Inspection on welding of Duplex and CS Pipes, Lamination of GRP (Underground and Above Ground), Connecting of DI (Ductile Iron) Pipes UG and AG. o Inspection on pre and installation of all mechanical equipment including penstocks, stop logs, adjustable weirs, scrapers, valves, pumps, structural, HVAC, pipe racks and piping. o Inspection on fabrication of Metallic Tanks until final painting. o Coordination with supplied vendor for clarifications on supplied material after installation and prior to commissioning and start-up.

o Inputs on data base for complete log and update of all inspection including remarks. o Coordination with all departments prior to inspections of mechanical activities. o Coordination with Material Department for all material storage, handling and preservation until installation

Company: SOCIETE INTERNATIONALE DE DESSALEMENT (SIDEM) 20-22 Rue De Clichy, 5009 Paris France, PO Box 3609, Abu Dhabi, UAE Position: Mechanical/Safety Engineer - Trainee

Duration: October 3, 2016 – March 15, 2017 (F2 Powerplant, FAPCO, Fujairah UAE) o Assisting Lead Engineer-in-charge for the works to be completed on F2 for the extended warranty which includes assurance of Safety Rules before and during work. o Assisting Lead Engineer-in-charge during his Personal Supervision of dismantling of scaffolding. Tool Box talks, Proper preparation and planning of work before work commences, safe working procedures and suitable equipment are correctly used to avoid danger, Certification of body harness and all other equipment are up-to-date.

Company: SOCIETE INTERNATIONALE DE DESSALEMENT (SIDEM) Position: Commissioning Engineer for Instrumentation - Trainee Duration: January 15 - June 30, 2016 (Az-Zour North, Kuwait) o Familiarization of DCS Interface for the command and feedback of Instruments o Loop Checking of Instruments: Digital Switches, Transmitters (Flow, Level, Temperature, and Pressure), RTDs, Control and Motor Operated Valves, Pumps. o Assisting Instrument Lead Engineer on Marshalling Box and Marshalling Cabinet using Multi meter and HART (Highway Addressable Remote Transducer) communicator. o Differentiating Field Powered and Loop Powered Instruments and troubleshooting on cabinet. o Completion of reports of all Loop Checking forms. Company: SOCIETE INTERNATIONALE DE DESSALEMENT (SIDEM) Position: Quality Control for Inspection - Trainee Duration: August 01, 2014 – June 30, 2015 (Sharjah, UAE) o Pre-Fabrication and Erection of Evaporator MED Units (10.7 MGD) for Shamal Az-Zour IWPP Plant

o Inspection includes: Fit-up inspection, Weld visual, Pickling and Passivation, Tubing and Expansion, Air and Hydro Testing, Final-Box Up and Listing of Punch Lists. o Daily and Weekly Report Overall Status, Scheduling of Inspections, Planning of Man Power Duration: July 01, 2015 – December 31, 2015 (Az-Zour North, Kuwait) o Punch List Clearance for 6 MED Units in coordination with QICL (SIDEM sub-contractor) o Coordination with HHI (Power Side) for water filling of evaporators o Coordination with AZN Owner for Final Inspection and Handing over to Commissioning Team o Planning of mobilization/de-mobilization of Man Power (Locally Hired) o Daily and weekly Report of Punch List Clearance Status submitted to Paris, France Company: CHIYODA PHILIPPINES CORPORATION (CPh)

Position: Engineer-1

Duration: February 16 – July 31, 2014

o Familiarization of piping software to be used on projects (Microstation, Autocad, PDS, PDMS) o Basic Training on Plot Plan, P & ID (Piping and Instrumentation Diagram), Piping Route Study, Piping Support, Line Index, Piping Service Class, Piping Materials, Piping Flexibility analysis Procedure and Basic Strength Calculation of Pipe Wall Thickness. o Plant visit in EEI Steel Fabrication Division Bauan Batangas, Philippines. Basic training includes: Shop Safety, Process Flow of fabrication, Equipment used, Fabrication activities, Shop QC and NDE activities, stress relieving activities and insulation, Shop surface preparation and painting. Company: PILIPINAS SHELL PETROLEUM CORPORATION (SHELL) Date of training: April 18-May 29, 2012

ANNUAL PLANT SHUTDOWN (45 DAYS)

o Assembly and Repair of Centrifugal (horizontal and vertical) Pump, P-407; Leak test

(Pressure Test: using Diesel Fuel and Water)

o Assembly and Repair of K-101/K-102 (largest compressor) o Bearing Inspection of K-507 (compressor located 100 ft. above sea level) o Shaft alignment using Rotoline device for K-508

o Use of Balancing Machine for motors

o Assembly of K-801 and getting its axial point.

o Balance checking of Multi-Stage blower impellers using dial indicator o Experience in using of overhead crane (5T and 10T), use of air blowers, familiarization of machine shop tools, accurate measuring of calipers and gauges. o Numerous stand-down and tool box meeting experiences EDUCATION / CERTIFICATES / TICKETS

CWB Welding Inspector Level 1 (ASME B31.3 – Process Piping, CSA 178.2-18) BGAS-CSWIP Painting Inspector – Grade 2 (TWI) Trained H2S Alive

CSTS 2020

FALL PROTECTION

Standard First Aid w/ AED

BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING - Registered Mechanical Engineer (Philippines)

Contact this candidate