Steven Howard

*** ******* *****

Robinson, TX *6706

adblwq@r.postjobfree.com - 254-***-****

Willing to relocate.

Authorized to work in the US for any employer.

WORK EXPERIENCE:

Shift Safety Representative

AECOM – Pubelo, CO (Pubelo Chemical Agent Pilot Plant, PCAPP) – February 2018 to Present

MAJOR RESPONSIBILITIES / DUTIES / TASKS

Perform all work safely and with the utmost concern for the safety of self and other employees. Perform all work in compliance with environmental permits and regulations. Work in close proximity to and or in a chemical demilitarization facility (PCAPP). Under limited supervision, responsible for moderately complex technical work in a wide range of environmental, safety and health disciplines to achieve compliance with ES&H standards along with federal and state regulatory requirements.

Perform basic systems safety tasks. Knowledgeable in the application of Army Regulations to facility plans and procedures, specifically:

AR 385-10, The Army Safety Program

DA PAM 385-61, Toxic Chemical Agent Safety Standards

DA PAM 385-64, Ammunition and Explosive Safety Standards

DA PAM 385-65, Explosive and Chemical Site Plan Development and Submission

Maintain current knowledge of specific government agency requirements. Exhibit knowledge and apply fundamental concepts, practices, and procedures of their environmental specialty. Independently determine and develop approaches to solutions. Develop, implement, and maintain safety and health programs, systems, and procedures. Monitor and prevent hazards and diseases in the work area. Investigates accidents, injuries, and complaints concerning hazards in the workplace.

Recommend improvements in processes, design, procedures and operating equipment to minimize hazards. Develop and conduct employee training, emergency preparedness and assure the quality of programs. Provide regulatory interpretation and technical advice. Act as a lead role for a team of ES&H specialists and/or support personnel. Administer an ES&H program on a small or medium-sized project

Safety Tech

McLane Company, Inc. - Temple, TX - February 2009 to January 2017

I helped support 40 Divisions across the U.S. with OSHA, EPA and DOT issues. Assist Safety Managers to develop, implement and maintain McLane Company Environmental Health & Safety (EH&S) programs. Conduct periodic OSHA, DOT and EPA field reviews to ensure compliance with Federal, State and local rules and regulations. Interface with Operations and Staff leadership to develop and implement of EH&S programs and best practices. Read, interpret and communicate applicable risk management related regulations, rules and industry standards.

Investigate, review and analyze workplace incidents (property damage/injuries/collisions) and corresponding investigation reports. Evaluate and recommend appropriate personal protective equipment; evaluate effectiveness and suggest upgrades where needed. Participate in risk assessments of the hazardous processes/conditions identified by Operations or during Risk Management field reviews. Advise appropriate methods of control or elimination of hazardous processes/conditions, including various available alternative measures. Monitor progress of corrective measures taken. Perform special projects as assigned.

Safety Superintendent

Southwest Corporation - Austin, TX - November 2007 to December 2008

Provide timely reports in writing of any observed unsafe conditions or practices, or violations of job security regarding safety issues; and take corrective actions. Investigate all accidents and implement immediate correction action. Report all injuries and accidents in a timely manner in accordance with Contract Documents, federal, state and local laws and regulations. Provide job foremen with appropriate training materials to conduct weekly "toolbox" safety meetings and attend to evaluate the effectiveness of the meetings. Review safety meeting reports submitted by job foremen and take necessary action to ensure meaningful weekly safety meetings are held by the job foremen. Comply with Carrier in all accident investigation and reporting procedures. Implement safety training programs for supervisors and employees applicable to their specific responsibilities. Be responsible for the control, availability, training and correct use of necessary safety equipment including personal protective equipment and apparel for the employees. Coordinate safety activities with the City of Austin Project Manager, Program Safety Manager, ROCIP Safety Inspector, Administrators and the Carriers, and take necessary step to promptly safety recommendations or directives issued thereby. Coordinate the public relations aspects of the Safety Program with Project Manager. Attend special safety meetings held or sponsored by the City of Austin Project Manager, Program Safety Manager, ROCIP Safety Inspector, Administrator, and/or Carrier. The Contractor's Program Safety Manager, Superintendent or Safety Supervisor is expected to participate in these meetings. Attend scheduled monthly meetings with the Program Safety Manager. Ensure that adequate first-aid supplies are available at the Work Site and that personnel are qualified and identified to administer first aid as required. Publish information at the Work Site concerning availability of first aid and emergency treatment for injured employees.

Safety Specialist

CSA, Ltd - Kuwait City, Kuwait - September 2006 to October 2007

Conduct inspections and investigations and recommend corrective action as needed. Develop, implement and evaluate all safety programs and procedures to assure personnel and facility safety. Provide assistance to the Branch Manager, professional safety consultation and technical assistance regarding OSHA, Military, and company safety directives to U.S. Army, Host Nation contractors and company personnel. Responsible for facility safety inspections at multiple work sites while working with various crews involved. Prepare and compile concise written reports of results and findings relating to corrective actions through my inspections. Schedule and follow through on accident investigations while developing safety briefings and conducting safety training and responsible for hazard assessments as required. Install and maintain safety surveillance equipment and programs while performing other related tasks as directed. Responsible for all changes and updates in all OSHA, Army, and other regulations as well as trend analyses. Provide guidance and support to junior safety specialists and technicians.

Air Monitoring Technician

Southwest Research Institute - San Antonio, TX - July 2000 to August 2006

Responsible for air Sampling of VX, GB nerve agent, and HD blister agent as well as NAQ Clearances. Conducted air monitoring field sampling and field and laboratory analyses for lethal chemical agents. Operated air-monitoring equipment for analyses of effluent gases and perform routine field checks and maintenance on field air monitoring instruments. Managed use of solid sorbent sampling tubes as well as calibrated automated air sampling and gas chromatographs. Performed duties of the Air Monitoring Response Team, including but not limited to, the use of personal protective equipment, operation of high-level detector kits, determination of cause of alarm, and acquisition of solid sorbent sampling tubes for laboratory analysis. Worked consistently with samples containing potentially hazardous materials as well as complete and replace log chart paper and forms, maintenance of air monitoring stations, compressed gas cylinders, and dry desiccant tubes. Maintained a working environment in compliance with current environmental permits and safety requirements while maintaining hazardous waste accumulation areas for compliance to state and federal regulations.

Electrician's Associate

Kroll Electric - Riesel, TX - June 1996 to July 2000

*Paid for over half of school expenses with the following job.

Responsible for fixtures and wiring in new homes and businesses as well as correcting and troubleshooting electrical problems. Also worked on electrical fixtures, ran conduit and wire, etc.

Aviation Storekeeper

U.S. Navy - Corpus Christi, TX - September 1986 to 1993

USS Carl Vinson, V2 Division launching and recovering aircraft: LPO for division supply and managed a $1.5 million annual budget keeping current and efficient financial records. Supervised 5 personnel while in charge of the division supply. Stocked, ordered and tracked all repair parts and division supplies. Worked directly with Technical support to ensure all part numbers and technical manuals were updated. I was one of the division's safety Petty Officers. Worked on deck to ensure repair parts were correct. Assigned as a division firefighter.

NAS Corpus Christi, Search and Rescue to support Aviation Training: Worked with search and rescue helicopters as well as operations maintenance. Inspected all parts for correct information resulting in accurate and streamlined parts supply. Ordered, stocked and tracked all repair parts and division supplies. Wrote training lectures, with clear and concise information on subjects such as sexual harassment, alcohol abuse, fire safety, fraud, waste, and abuse. Maintained current chemical MSDS sheets on all paints and lubricants. Maintained all records for Air Purifying cartridges and Hazardous materials both new and used.

SIGNIFICANT COURSEWORK:

Safety Training Materials

Safety Planning

OSHA Record Keeping

Air Sampling & Monitoring

Advanced Hazardous Waste Disposal

Federal & State Regulations

Construction Safety Standards

Health Effects of Toxic Substances

Construction Safety

Site Survey & Risk Analysis

Combating Drug Use in Industry

Safety Engineering Techniques

Industrial Chemical Hazards

*References and itemized certification listing available upon request.

EDUCATION

Associate of Applied Science in Environmental Health & Safety

Texas State Technical College Waco - Waco, TX

SKILLS

Microsoft Office (10+ years)

MILITARY SERVICE

Service Country: United States

Branch: Navy

September 1986 to March 1993

CERTIFICATIONS/LICENSES:

SSHO September 2017 40-hour EM 385-1-1 USACE Safety & Health

CSHO September 2015 to Present Certified Safety & Health Official General Industry

OSHA - 501 July 2007 to July 2011

OSHA 500 May 2007 to May 2011

OSHA #521 May 2015 to Present OSHA Guide to Industrial Hygiene

OSHA #2045 September 2014 to Present Machinery and Machine Guarding Standards

OSHA #2264 June 2014 to Present PERMIT-REQUIRED CONFINED SPACE

OSHA #3095 May 2014 to Present Electrical Standards

OSHA #3115 September 2015 to Present Fall Protection

OSHA #2015 August 2015 to Present Hazardous Materials

ADDITIONAL INFORMATION

COMPUTER SKILLS: Software: Microsoft Office (Word, Excel, Outlook, etc.), Internet, etc.

Contact this candidate