Inspection Engineer
Resume:
Jinish Ompedathil
E-mail: adbkyb@r.postjobfree.com
Mobile: +971********* (UAE)
Mobile: +919********* (INDIA)
Career Objective
For seeking a position in a high technical level with a dynamic and challenging professional environment.
Professional Summary
15 years of experience as a QA/QC Engineer/Supervisor/Coordinator & QC Inspector in Welding, Piping, Pressure vessels, Tanks, Skid and Structures in the field of Oil and gas, pipelines, petrochemical refineries, manufacturing and power plant projects etc.
Team oriented with good communication and presentation skills.
Enjoys challenging work environment with problem solving abilities.
Ability to work both independently and collectively to achieve objectives.
Hard & Smart working Under any Circumstances
Educational Qualifications
Diploma in Mechanical Engineering.
Sree Bodhi University Pondicherry (2004)
Secondary School leaving Certificate (S.S.L.C)
General Education Department Govt. of Kerala. (2001) Additional Qualifications
CSWIP 3.1-Welding Inspector
ASNT LEVEL –II
Radiographic Test (RT)
Ultrasonic Test (UT)
Penetrant Test (PT)
Magnetic Particle Test (MT)
Computer Skills
Experienced Office Package: Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Microsoft Outlook Express, Amogh and ERP
Experience Summary
I) Designation: QC Coordinator / Welding & NDT Inspector Company : PETROJET ABU DHABI
Client : ADNOC (Abu Dhabi National Oil Company)
Project : EPC for Rumaitha and Shanayel Restoration & 20% Technical Rate Project Tenure : 10-June-2019 to 30-Jan-2020
Responsibility
Carrying out weekly meetings with client and TPI inspectors and gathering/forecasting information for a smooth on-site work plan.
Review and verification of material Test Certificate to ensure compliance with Shell Dep, Codes, Standards and ITP.
Review of batch certificate and Verification of welding consumable as per Shell Dep, Codes, Standards and ITP.
Witnessing Welder performance qualification test.
Witnessing PQR qualification test and review the PQR & WPS documents.
Witnessing PQR qualification test of Hot Tapping.
Coordinating with Construction/production teams on day to day problems at site and following up on the same.
To conduct fit up and dimension inspections as per Inspection and Test Plan (ITP) and to provide technical guidance for welding sequence and distortion control.
Conducting site monitoring welding inspections with ADCO to confirm subcontractor’s adherence to project specifications.
Witnessing Tie in joint activities such as marking, thickness gauging, fit up, welding and NDT.
Witnessing and coordinating for flange/gasket/bolt torqueing in site.
Close monitoring of material handling and storage during various stages of fabrication and erection.
Ensure that all ITP, QCP, SHELL DEP, Project Specifications, codes and standards are being followed during the pre-fabrication and erection activities.
Carrying out the welding inspection before, during and after welding operation as per approved WPS, ITP, relevant engineering drawing, Shell Dep and project specification.
Guiding welders and explaining the company welding procedures.
Calibration control of welding machine, heat treatment equipment’s, inspection tools and other equipment’s as per project requirement.
Checking of welding consumable handling, storage and electrode Baking/Holding as per procedure.
Review the spool release packages from pre-fabrication shop and releasing the spools for further activities.
Releasing painted spools for erection by prioritizing the level of urgency.
Coordinating with subcontractor for each NDT activities.
Coordinating with ADCO for all inspection activities as per ITP. II) Designation : NDT & Welding Inspector
Company : Maire Tecnimont Spa
Client : ADCO (Abu Dhabi Company for Onshore Petroleum Operations) Project : EPC for Al Dabbiya Surface Facilities Project – Phase III Tenure : 16-Aug-2016 to 30-April-2019
Responsibility
Carrying out weekly meetings with client and TPI inspectors and gathering/forecasting information for a smooth on-site work plan.
Review and verification of material Test Certificate to ensure compliance with Shell Dep, Codes, Standards and ITP.
Review of batch certificate and Verification of welding consumable as per Shell Dep, Codes, Standards and ITP.
Witnessing Welder performance qualification test.
Witnessing PQR qualification test and review the PQR & WPS documents.
Witnessing PQR qualification test of Hot Tapping.
Coordinating with Construction/production teams on day to day problems at site and following up on the same.
To conduct fit up and dimension inspections as per Inspection and Test Plan (ITP) and to provide technical guidance for welding sequence and distortion control.
Conducting site monitoring welding inspections with ADCO to confirm subcontractor’s adherence to project specifications.
Witnessing Tie in joint activities such as marking, thickness gauging, fit up, welding and NDT.
Witnessing and coordinating for flange/gasket/bolt torqueing in site.
Close monitoring of material handling and storage during various stages of fabrication and erection.
Ensure that all ITP, QCP, SHELL DEP, Project Specifications, codes and standards are being followed during the pre-fabrication and erection activities.
Carrying out the welding inspection before, during and after welding operation as per approved WPS, ITP, relevant engineering drawing, Shell Dep and project specification.
Guiding welders and explaining the company welding procedures.
Calibration control of welding machine, heat treatment equipment’s, inspection tools and other equipment’s as per project requirement.
Checking of welding consumable handling, storage and electrode Baking/Holding as per procedure.
Review the spool release packages from pre-fabrication shop and releasing the spools for further activities.
Releasing painted spools for erection by prioritizing the level of urgency.
Conducting the walk-through inspection of completed piping system with respect to Isometric, P&ID, GA.
Preparing all piping punch lists and verifies all items are in place and act as an agent for Company during punch list activity.
Witness the Hydro test of Piping System as per LDT and Isometric.
Review the hydro test packages and prepare the punch list.
Coordinating with subcontractor for each NDT activities.
Coordinating with ADCO for all inspection activities as per ITP. III) Designation : QC Engineer
Company : Qatar Engineering Construction Company WLL (QCON-UAE) Client : ADGAS (Abu Dhabi Gas Liquefaction Co. Limited) Project : EPC FOR FER PROJECT PACKAGE 3 SRU SCHEME 8 & 16 (DAS ISLAND) Tenure : 10-Oct-2014 to 9-Aug-2016
Responsibility
Carrying out weekly meetings with clients and TPI inspectors and gathering/forecasting information for a smooth on-site work plan.
Review and verification of material Test Certificate to ensure compliance with Project Specifications, Codes, Standards and ITP.
Review of batch certificate and Verification of welding consumable as per Project Specifications, Codes, Standards and ITP.
Witnessing Welder performance qualification test.
Witnessing PQR qualification test and review the PQR & WPS documents.
Coordinating with Construction/production teams on day to day problems at site and following up on the same.
To conduct fit up and dimension inspections as per Inspection and Test Plan (ITP) and to provide technical guidance for welding sequence and distortion control.
RT film verification and evaluation of rejected joints. Conducted awareness sessions to welders/ welding foremen on weld defects, welding quality, and welding safety.
Witnessing Tie in joint activities such as marking, thickness gauging, fit up, welding and NDT.
Witnessing and coordinating for flange/gasket/bolt torqueing in site.
Witnessing and monitoring of jacketed piping fabrication.
Witnessing of Weld visual inspection of jacketed piping.
Witnessing of Valve Inspection as per API-598.
Close monitoring of material handling and storage during various stages of fabrication and erection.
Coordinating with subcontractor for each NDT activities.
Ensure that all ITP, QCP, Project Specifications, codes and standards are being followed during the pre-fabrication and erection activities.
Carrying out the welding inspection before, during and after welding operation as per approved WPS, ITP, relevant engineering drawing, and project specification.
Guiding welders and explaining the company welding procedures.
Calibration control of welding machine, heat treatment equipment’s, inspection tools and other equipment’s as per project requirement.
Checking of welding consumable handling, storage and electrode Baking/Holding as per procedure.
Organizing, monitoring and reviewing of PWHT chart and reports.
Review the spool release packages from pre-fabrication shop and releasing the spools for further activities.
Releasing painted spools for erection by prioritizing the level of urgency.
Conducting the walk-through inspection of completed piping system with respect to Isometric, P&ID, GA.
Preparing all piping punch lists and verifies all items are in place and act as an agent for Company during punch list activity.
Witness the Hydro test of Piping System as per LDT and Isometric.
Review the hydro test packages and prepare the punch list.
Preparation of project dossier and documentation.
Coordinating commissioning activities.
Coordinating with ADGAS for all inspection activities as per ITP. IV) Designation : QC Inspector (Welding & Piping)
Company : ABJ Engineering & Contracting Company K.S.C (closed), Kuwait.
(Kharafi National Fabrication Facility)
Clients : Total E&P UK Ltd, Saipem S.p.a, Petrofac, KOC, KNPC Project : Laggan Tormore Project (Shetland gas plant project) UK, Building New Booster Station BS 171 at West Kuwait, Building New Booster Station BS 160 at West Kuwait, EPC for Asab FFD Project (Lift Gas Dehydration package), EPC for Asab FFD Project (Pressure Vessels)
Tenure : 02-Mar-2010 to 15-Jun-2014
Responsibility
Carrying out weekly meetings with clients and TPI inspectors and gathering/forecasting information for a smooth on-site work plan.
Review and verification of material Test Certificate to ensure compliance with Project Specifications, Codes, Standards and ITP.
Review of batch certificate and Verification of welding consumable as per Project Specifications, Codes, Standards and ITP.
Witnessing Welder performance qualification test.
Witnessing PQR qualification test and review the PQR & WPS documents.
Coordinating with Construction/production teams on day to day problems at fabrication shop and following up on the same.
To conduct fit up and dimension inspections as per Inspection and Test Plan (ITP) and to provide technical guidance for welding sequence and distortion control.
RT film verification and evaluation of rejected joints. Conducted awareness sessions to welders/ welding foremen on weld defects, welding quality, welding safety.
Witnessing Tie in joint activities such as marking, thickness gauging, fit up, welding and NDT.
Witnessing and coordinating for flange/gasket/bolt torqueing in site.
Close monitoring of material handling and storage during various stages of fabrication and erection.
Coordinating with subcontractor for each NDT activities.
Ensure that all ITP, QCP, Project Specifications, codes and standards are being followed during the pre-fabrication and erection activities.
Carrying out the welding inspection before, during and after welding operation as per approved WPS, ITP, relevant engineering drawing, and project specification.
Guiding welders and explaining the company welding procedures.
Calibration control of welding machine, heat treatment equipment’s, inspection tools and other equipment’s as per project requirement.
Checking of welding consumable handling, storage and electrode Baking/Holding as per procedure.
Organizing, monitoring and reviewing of PWHT chart and reports.
Review the spool release packages from pre-fabrication shop and releasing the spools for further activities.
Releasing painted spools for erection by prioritizing the level of urgency.
Witnessing skid structurel, equipments, piping members erection.
Witnessing hydro test activities of skid assembly.
Witnessing various stage of skid assembly.
Final inspection of skid assembly with respect to the P&ID, Isometric drawing and GA.
Witnessing pneumatic test of skid assembly full system.
Final dimension inspection of fabricated piping spools.
Preparation of Final Dispatch spool release.
To conduct final dimension and weld visual inspection of Pressure vessel fabrication as per ITP.
Witnessing Pneumatic test of RF Pads for Nozzles.
Conducting the walk through inspection of completed pipe rack modules with respect to Isometric, P&ID, GA.
Preparing all piping punch lists and verifies all items are in place and act as an agent for Company during punch list activity.
Witness the Hydro test of Piping System as per LDT and Isometric.
Review the hydro test packages and prepare the punch list.
Coordinating with KOC, KNPC, SAIPEM, PETROFAC, PETRECO, TOTAL, and TPI for all inspection activities as per ITP.
V) Designation : QC Inspector Mechanical
Company : Black Cat Engineering & Construction. W.L.L Doha Qatar Client : QATAR PETROLEUM (ON SHORE)
Project : EPIC for replacement of V-2003 (GLYCOL SEPARATOR) and installation of air cooler at NGL-2/Mesaieed
: EPIC for smokeless flare & automatic blow down system & new control room at FSP/Dukhan
Tenure : 15-May-2008 to 04-Feb- 2010
Responsibility
Familiar with P&ID, Isometric and Equipment Drawing.
Material verification with the support of drawing and mill test certificate (MTC)
Close monitoring of material handling and storage during various stages of construction.
To conduct fit up and dimension inspections as per Inspection and Test Plan (ITP) and to provide technical guidance for welding sequence and distortion control.
Ensure that all inspection and test plan, quality control procedures, project specification, codes and standards are being followed during the production activities.
Witnessing Weld visual inspection & preparing report.
Witnessing Welder performance qualification test.
Witnessing PQR qualification test.
Carrying out the welding inspection before, during and after welding operation as per approved WPS, test plan, relevant engineering drawing, international standard and project specification.
Coordinating for all NDT activities such as RT, LPI, MPI, UT, PWHT&AUT as per the project requirements and specification.
RT film verification and evaluation of rejected joints. Conducted awareness sessions to welders/ welding foremen on weld defects, welding quality, welding safety
Witnessing Tie in joint activities
Marking all tie in joint with respect to drawing.
Coordinating all NDT activities of tie in joints.
Calibration control of welding, heat treatment equipment’s, and inspection tools and equipment’s as per company procedure.
Review test package and line walk down.
Organizing, monitoring and evaluating PWHT
Witnessing the Post weld Heat treatment process AS PER APPROVED COMPANY PROCEDURE
Checking of consumable specifications, handling, storage, and treatment during welding.
Witness the Hydro test of Piping System AS PER APPROVED COMPANY PROCEDURE
Witnessing of hydro test, preparation of test pack & line check
Preparation of checklists, punch lists, mechanical clearance, and inspection release reports.
Final dimension inspection of fabricated piping spools.
Review the spool release package and releasing the spools for further activities.
Preparation of Final Dispatch spool release.
Preparing all piping punch lists and verifies all items are in place and act as an agent for Company during punch list activity.
Coordinating commissioning activities.
Verifying heavy equipment documents with the project requirements. VI) Designation : QC Engineer
Company : Karpara Project Engineering (P) Ltd
Client : ADITYA BIRLA
Project : 2x23 MW TPP Project / Madya Pradesh
Tenure : 21-Dec-2007 to 13-Mar-2008
Responsibilities
Familiar with Equipment Drawing.
Material verification with the support of drawing and mill test certificate (MTC)
Close monitoring of material handling and storage during various stages of construction.
To conduct fit up and dimension inspections as per Inspection and Test Plan (ITP) and to provide technical guidance for welding sequence and distortion control.
Ensure that all inspection and test plan, quality control procedures, project specification, codes and standards are being followed during the production activities.
Witnessing Weld visual inspection & preparing report.
Witnessing Welder performance qualification test.
Carrying out the welding inspection before, during and after welding operation as per approved WPS, test plan, relevant engineering drawing, international standard and project specification.
Coordinating for all NDT activities such as RT, LPI, MPI, UT, PWHT as per the project requirements and specification.
RT film verification and evaluation of rejected joints. Conducted awareness sessions to welders/ welding foremen on weld defects, welding quality, welding safety
Calibration control of welding, heat treatment equipment’s, and inspection tools and equipment’s as per company procedure.
Organizing, monitoring and evaluating PWHT
Witnessing the Post weld Heat treatment process AS PER APPROVED COMPANY PROCEDURE
Checking of consumable specifications, handling, storage, and treatment during welding.
Coordinating commissioning activities.
Verifying heavy equipment documents with the project requirements.
Witnessing the sequence erection activities and dimensional inspection for all boiler pressure parts and non-pressure parts items.
Witnessing Boiler Drum installation and dimensional check.
Witnessing Pre-Parts and Equipment erection.
Preparation of project dossier and documentation.
Witnessing and monitoring of jacketed piping fabrication. VII) Designation : QC Engineer
Company : Bhavani Erectors (P) Ltd
Contractor : Bharat Heavy Electrical Ltd
Client : NTPC & SAIL (NSPCL)
Project : 2x250 MW TPP Project / Bhillai
Tenure : 10-Aug-2006 to 9-Dec-2007
Responsibilities
Familiar with Equipment Drawing.
Material verification with the support of drawing and mill test certificate (MTC)
Close monitoring of material handling and storage during various stages of construction.
To conduct fit up and dimension inspections as per Inspection and Test Plan (ITP) and to provide technical guidance for welding sequence and distortion control.
Ensure that all inspection and test plan, quality control procedures, project specification, codes and standards are being followed during the production activities.
Witnessing Weld visual inspection & preparing report.
Witnessing Welder performance qualification test.
Carrying out the welding inspection before, during and after welding operation as per approved WPS, test plan, relevant engineering drawing, international standard and project specification.
Coordinating for all NDT activities such as RT, LPI, MPI, UT, PWHT as per the project requirements and specification.
RT film verification and evaluation of rejected joints. Conducted awareness sessions to welders/ welding foremen on weld defects, welding quality, welding safety
Calibration control of welding, heat treatment equipment’s, and inspection tools and equipment’s as per company procedure.
Organizing, monitoring and evaluating PWHT
Witnessing the Post weld Heat treatment process AS PER APPROVED COMPANY PROCEDURE
Checking of consumable specifications, handling, storage, and treatment during welding.
Coordinating commissioning activities.
Verifying heavy equipment documents with the project requirements.
Witnessing the sequence erection activities and dimensional inspection for all boiler pressure parts and non-pressure parts items.
Witnessing Boiler Drum installation and dimensional check.
Witnessing Pre-Parts and Equipment erection.
Preparation of project dossier and documentation. Witnessing and monitoring of jacketed piping fabrication. VIII) Designation : QC Engineer
Company : Bhavani Erectors (P) Ltd
Contractor : Bharat Heavy Electrical Ltd
Client : Jindal Stainless Ltd (JSL)
Project : 2x125 MW TPP Project / Orissa
Tenure : 25-Oct-2005 to 2-Aug-2006
Responsibilities
Familiar with Equipment Drawing.
Material verification with the support of drawing and mill test certificate (MTC)
Close monitoring of material handling and storage during various stages of construction.
To conduct fit up and dimension inspections as per Inspection and Test Plan (ITP) and to provide technical guidance for welding sequence and distortion control.
Ensure that all inspection and test plan, quality control procedures, project specification, codes and standards are being followed during the production activities.
Witnessing Weld visual inspection & preparing report.
Witnessing Welder performance qualification test.
Carrying out the welding inspection before, during and after welding operation as per approved WPS, test plan, relevant engineering drawing, international standard and project specification.
Coordinating for all NDT activities such as RT, LPI, MPI, UT, PWHT as per the project requirements and specification.
RT film verification and evaluation of rejected joints. Conducted awareness sessions to welders/ welding foremen on weld defects, welding quality, welding safety
Calibration control of welding, heat treatment equipment’s, and inspection tools and equipment’s as per company procedure.
Organizing, monitoring and evaluating PWHT
Witnessing the Post weld Heat treatment process AS PER APPROVED COMPANY PROCEDURE
Checking of consumable specifications, handling, storage, and treatment during welding.
Coordinating commissioning activities.
Verifying heavy equipment documents with the project requirements.
Witnessing the sequence erection activities and dimensional inspection for all boiler pressure parts and non-pressure parts items.
Witnessing Boiler Drum installation and dimensional check.
Witnessing Pre-Parts and Equipment erection.
Preparation of project dossier and documentation. Witnessing and monitoring of jacketed piping fabrication. IX) Designation : Junior QC Engineer
Company : T.P.S Builders Ltd
Tenure : 3-July-2004 to 19-Oct-2005
Project Handled
Project : FCCU Project Kochin Refinery Ltd / Kerala Contractor : Engineers India Limited
Client : Kochin Refinery Ltd
Personal Details
Fathers Name : Gangadharan Ompedathil
Age & Date of Birth : 32, 04-Apr-1985
Sex : Male
Marital Status : Married
Nationality : Indian
Languages Known : English, Hindi, and Malayalam
Passport Details
Passport Number : P7163920
Place of Issue : Abu Dhabi
Date of Issue : 12-06-2017
Date of Expiry : 11-06-2027
Declaration
I hereby declare that the above-mentioned details are correct and true to the best of my knowledge.
Jinish Ompedathil
Contact this candidate