Engineer Plant

Jahan Ahmadi, P.Eng

Address: **** **** ******** ***.,

North Vanncouver, BC, Canada

Cell: +1-403-***-****

Email: **********@*****.***

SUMMARY

Process Design:

More than 25 years strong experiences as Chemical engineer on oil and gas projects as well as plant operating engineering support.

Solid background in the design and engineering of Carbon Capture process integration studies and business development, heavy oil processing, gas and condensate refineries from conceptual phase to operations with more than 12 years of experience with operating companies as well as more than 16 in engineering firm

Development of PFD, MHB, MSD and P&IDs from scratch to hand-over to customer.

Development of control system, process and control narratives, S/D keys and C&E diagrams, control sequences and logic diagrams, alarm list and set point, process input and equations for control coding and programming.

Profession in process simulation with most software, equipment sizing, hydraulic modeling, plant safety analysis, relief valve calculations and flare system design; involved in HAZOP, HAZID and SIL review and recommendation and implementation.

Accurate cost estimation (different class estimation), economic appraisal and sensitivity analysis to support funding and financing and execution strategy.

Supporting the Operations area Coordinators and Unit Contact Engineers to ensure that the appropriate operational and/or capital solutions are identified and implemented in a timely manner align with engineering best practices and company procedures.

Work with the Plant Engineering Designers to support the detailed design of in- house capital projects either in home office or other engineering operating centers.

Participate in unit commissioning as part of planned/unplanned outages and project completions as per Plant Engineering procedures, being as part of process engineer team at site for hand over to operation team and time to time to stabilize operation.

Process Leadership

Supervised and trained junior and intermediate engineers. Acted in a Process Lead role on small scale to large scale projects, involving supervision of other process engineers. Reviewed, stamped and issued IFC process deliverables.

Ensure approved plans are updated, endorsed by the business and published on a regular basis, Identify short-term optimization opportunities and facilitate their development and implementation, Advise management on optimal value chain operations including short and medium term planning.

Proven performance in senior project / lead process engineer role, responsible for technical quality & integrity of the design, scope of work and design change management; self-motivated and well-organized professional with excellent interpersonal skills.

PROFESSIONAL EXPERIENCE

May 2018 to Now Senior Plant Process Engineer, Svante Inc. (Former Inventys Thermal Technologies Inc.)

Business development studies for CO2 adsorption

Cost estimation and project appraisal

Lead Commissioning on CO2 Capture demonstration plant 2014 to 30 April 2018 Principal/Lead process engineer (Contractor), EPSL

Supporting process and operating team for day to day condensate refinery, monitoring units (NHT, Octanizer and CCR, Penex) performance, adjust set points and direct operation during upset situation, involving of MOCs, evaluating plant performance and guiding gasoline blending to meet specs and so

Working with operation and I&C team time to time involvement for plant safe start up and operating, optimization and control improvement

Pre commissioning and start up engineering support (ICAP methodology) of Penex

(UOP C5/C6 Isomerization), NHT and Octanizer process plants (AXENS Process Technology) start up.

Involved in different start up meeting, review of punch list and remediation to close, working on TQs and present recommendation to contractors.

development of catalyst activation model based on licensor recommendation,

development of final alarm list and set point, contribute and process support on CCR furnace BMS, CCR waste heat boiler ESD and logic control diagram development for programming and coding.

Development of business model for new technology on unconventional oil produced water treatment,

Feasibility study of increasing of C3 plus recovery in existing facility, Capacity 110,000 e3m3/d.

Santos Central and Flank Gas Plant Project with integration of existing Scotia Gas Plant Project (FEED), Australia

SemCAMS K3 Gas Plant Debottlenecking and Optimization Project (Basic Design), Canada

Paramount Gas Plant Debottlenecking and Optimization Project (Basic Design), Canada

Santos Fairview GLNG Gas Plant Project (FEED), Australia Nov 2013 - Oct 2014 Principal Process Engineer, Jacobs, Calgary

Imperial Oil Kearl Oil Sands complex sustaining Project - Phase 1, Canada

Suncor Firebag 3 and 4 Plant Debottlenecking and Optimization Project, Canada Nov 2010 - Oct 2013 Lead/Senior Process Engineer, EPSL Calgary

Plover Lake Oil Production Plant - SAGD (FEED), Canada

Rosemary, Bantry north and Bantry Multiwell Gas Plants Asset Integrity Management, Canada

Gordondale Gas Plant Project, Detailed Design and Construction Support, Canada

Devon Walley Well Pads and Oil Production Plant – SAGD (FEED), Canada

Rosemary, Bantry north and Bantry Multiwell Gas Plants, Safety integrity & Operability management Study, Canada

Trevita Gondala Waste Oil Processing Facilities Debottlenecking Project, Canada

Laricina Germain Well Pads and Oil Production Plant - SAGD (Detailed Design), Canada

Jun 2004 – Nov 2010 Senior Process Engineer, Worley Parsons, Calgary

NEXEN Plant Debottlenecking Study Project, Canada

Spectra Energy North Nelson Gas Plant Project (FEED & Detailed Design), Canada

Albian Oil Sands Plant Expansion I Project, (FEED& Detailed Design), Canada

Devon Jackfish Oil Production Plant-Well PADS and Utilities (FEED& Detailed Design), Canada

Ivanhoe Energy Upstream Upgrader Plant (Concept Design), Canada

Imperial Oil Taglu Gas Plant Development Project (FEED), Canada

Suncor Oil Slurry Preparation Facility Project (FEED), Canada Aug 2003 – Jun 2004 Senior Process Specialist, Jacobs, Calgary

Saudi Aramco Hawiyah Gas Plant Expansion Project (FEED), Saudi Arabia

Saudi Aramco Pump Station # 6 Project (FEED), Saudi Arabia NATIONALITY

Canadian Citizen

EDUCATION

B.Sc. in Chemical Engineering (Major: Petroleum Refining Process Engineer), Tehran, Iran

PROFESSIONAL AFFILIATIONS

Professional Engineer (P.Eng), Association of Professional Engineers and Geoscientists of Alberta (APEGA), Canada

Professional Engineer (P.Eng.), APEGS, Saskatchewan, Canada COMPUTER SKILLS

Aspen Hysys, Unisim, PetroSim, PRO II, Promax, Aspen Flarenet, Pipephase, Pipesim, AFT Fathom, HTRI and EDR, HEXTRAN, ICAP, COMFAR, MS Office TECHNICAL EXPERTISE/ TRAINING COURSES

Natural Gas Processing Principals and Technologies, University of Calgary, Canada

HYSYS training course at SAIT College and also participate workshops for new versions, Canada

Extraction and Upgrading of Oilsands Bitumen, University of Alberta, Canada

Principal of equation of states and its application in process design, Iran

Slurry pumps training by Colt, Canada

Project Management Workshop by Colt, Canada

Project Execution Plan (PEP) Training by Worley Parsons, Canada

Aspen Training course, AspenTech, Canada

Produced water treatment, Aker Solution, Canada

Promax Training Course, Canada

AFT Fathom Training Course, Canada

PRO II software training course, Iran

Mathlab / Simulink training course, Iran

Value Engineering training course by SAVE Society, Iran

Process Simulation & Design using Hysys and Pipesys, Iran

Project Appraisal and COMFAR software training course for project financial analysis, Iran

Intools software training course by Colt, Canada

ICAPS/PRECOM software training

Contact this candidate