SAAD BACHI C.E.T.

*** ******* **** ***: 587-***-****

Fort Mcmurray, AB T9K0V1 adbf63@r.postjobfree.com

Electrical and Instrumentation Specialist

Highly experienced Red Seal Electrician and Instrumentation Technician; Sound knowledge in oil and gas, plastic, packaging, pulp and paper industries. Certified as Engineering Technologist (ASET); Master Electrician, 3rd Power System Electrician and Certified Fire Alarm Technician. 309A/442A Electricians Certificate

PROFESSIONAL EXPERIENCE

E & I Supervisor

Masonite International London Ontario 2019-Present

Provide leadership, direction and guidance to maintenance personnel.

Supervise, evaluate, motivate & train personnel to ensure work completed efficiently, effectively and safely.

Ensure that safe conditions exist at all times within the work environment; take appropriate action to protect the health and safety of employees.

Ensure the efficient and effective use of manpower, equipment and material resources through preparing daily agendas for maintenance personnel, reviewing work progress on regular basis and producing department efficiency reports for every shift

Schedule equipment service according plant PM program and workorders submitted by departments to ensure non-interrupted production flow.

Develop and verify existing work orders to ensure that all resources ready for successful execution

Develop new PM procedures for continues improvement of equipment reliability and to prevent breakdowns.

Develop and maintain equipment database including labelling of all equipment and piping

Develop and maintain documentation database for all equipment

Maintain efficient spare parts inventory with keeping cost minimum

Develop and maintain accurate database of spare parts

Ensure the Company’s quality standards, Canadian Fire and technical safety standards are met through both close liaison with Quality Assurance department, full participation in the HACCP program, adherence to Good Manufacturing Practices, maintaining required documentation as well as frequent review and implementation of Company and Government Policies.

Liase with all Departments to assure that their equipment service requirements are met in timely fashion.

Constantly look for possible improvements in current production process to minimize cost of production and to improve efficiency. Provide support for another departments in CI initiatives

Assist with environmental compliance, chemical usage and site security

Maintain effective internal and external working relationships.

E & I Planner

Aditya Birla Terrace Bay Ontario 2017-2019

Prepare weekly maintenance schedule in collaboration with the area maintenance and

operations supervisors.

Receives all work requests from requestors except emergency work.

Uses the CMMS to plan the work order including scope of work, manning, materials required,

safety instructions, required permits, special tools, specifications and drawings.

Estimates the cost of the work order in terms of direct labor and materials required.

Reserves the materials from mill stores or issues a requisition to purchasing.

Assigns the tradesperson in collaboration with the Maintenance Supervisor.

Build plans that minimize equipment downtime and maximize safe/efficient/effective use of resources

Utilize planner complexity guidelines to determine the extent of detailed planning required

Define scope of work for contract services

Ensure that all safety requirements such as PPE, procedures, practices, LOTO and Isolations, are in the work order planning process

Test the plan to ensure alignment with original objectives

Recycle major changes and deviations from the plan

E & I Planner / Technician

Athabasca Oil Sands (State Oil) (Fort McMurray) 2017 to 2018

Provide Electrical and Instrumentation support from A to Z that include but not limited to work order planning by using Maximum software

Recognizing work of different risk categories and understanding the impact these risks have on execution steps required to complete the work safely and efficiently

EHT and steam tracing Winterization planning.

Interfaced with project stakeholders (consultants, clients, sub-contractors) to resolve conflicts.

Maximize resource productivity by identifying parts, materials, special tools, external services, rentals and documentation

E & I Control Technician

Syncrude Canada (Fort McMurray, AB) 2013 to 2016

Used the SAP Work order system to create PM notification, break in work order, review, update job planning list, order the require items and log work history.

Worked with E/I planner to help in creating turnaround work packages

Experience in plant maintenance software’s SAP, TDoc, Web Maintenance for PM, Ordering materials,

Worked on maintenance of all field instrumentation and control system of hydrogen compressors,

Performed troubleshooting and calibration of all field Instrumentation including Smart, Electronic and pneumatic transmitters /controllers according to standard job procedures (SJP).

Develops maintenance procedure such as the Preventive Maintenance and worker level instructions

Worked on Control Valves removing installation maintenance and overhauling of Fisher, Valtek, Bettis and Nelson Jam Bury

Electrical and Instrumentation Planner /QA

URS Flint Wood Buffalo Water Treatment Plant (Fort McMurray, AB) 2010-2012

Attended testing and inspections as identified in the approved Inspection and Test Plan (ITP).

Inspected installation quality to establish if client requirements achieved.

Provided workforce planning input, development and updating of the project.

Developed VBA Excel tool for generation and maintenance of project turn over documents.

Performed preventive maintenance, troubleshooting/repairs for electrical and control equipment: electrical safety systems, motor starters, VFDs and 4.16KV/600 V and 480 V power distributions.

Assisted with plant maintenance; worked on PLCs, control valves, smart transmitters, vibration, and compressor control equipment; tested transformers and switch gears.

Tested and commissioned Switchgear, Transformers, Breaker and relay testing

Professionally assisted clients; identified customer needs and sought opportunities for promoting products/services.

Electrical Technician (subcontract)

Laird Electric Shell Scotford Upgrade and Albian Sand (Fort McMurray, AB) 2010

Performed setup/testing of electrical instruments (temperature and pressure sensors).

Installed high voltage electrical devices: circuit breakers and switch gears; pulled/terminated cables.

Read and interpreted isometric, process, piping, and instrumentation drawings..

Provided QA and Megger and installed electrical heat tracer.

ELECTRICAL DESIGN DRAFTER Pulp and paper, Contract."

Advanced Dynamics Corporation LTD - Montréal, QC September 2008 to December 2009

Generated and updated Electrical schematic for MCC's, Substations, Cabinet Power layouts

Laid out Electrical devices by using AutoCAD for PLC and DCS systems

Draw diagrams and electrical harnesses for electrical charger and UPS system

Provide technical support to production problems distorts electrical and mechanical

Prepared Block-diagrams, Instrument index-cable list and terminals strip, Loop-diagrams and Junction boxes,

Prepared I/O list for clients PLC configurations, migrated schematics from AutoCAD to Eplan

Electrical Designer (plastic industries contract)

Husky - Bolton, ON - February 2007 to June 2008

Designed single line diagrams and power distribution system by using the Eplan software.

Studied safety circuit, motor control, system grounding; laid out plant, substation, main control panel components, cable & cable tray, safety switches, routing machine cable by using Auto CAD 2D/3D.

Calculated optimum size for VFD's, braking resistors, transformers, filters, conductors, cables, breakers, contactors, disconnects, fuses, load current and reactive capacity using Excel.

Reviewed, updated and released electrical schematics "AS BUILT," bills of materials, etc.

Prepared I/O list for client PLC configurations, migrated schematics from AutoCAD to Eplan.

Installed, wired, verified, and maintained PLC (Rockwell, Siemens), VFDs (Allen Bradley, Control Technique), programmable limit switches, operator interfaces (Allen Bradley, Panel View), static systems, blower, and various sensors (limit, photo, proximity, pressure, read, safety switches).

Laid out, installed and wired electrical and pneumatic and hydraulic parts.

ELECTRICAL TECHNICIAN

Deacro Industries Innovation - Mississauga, ON - August 2005 to February 2007

Packaging Industries.

Laid out installed control panel parts for various type of slitting machine

CONTROL PANEL BUILDER "packaging" Contract"

PLC Design Incorporated, Aurora, Ontario Mar 2004-Aug 2005 - Aurora, ON - March 2004 to August 2005

VFDs (Allen-Bradley, Control Technique, programmable limit switches, operator interfaces (Allen Bradley,

Panel View), Static systems, Blower, different types of sensors (limit-, photo-, proximity-, pressure-, read-, safety- switches)

Laid out, installed and wired electrical and pneumatic and hydraulic parts Read and upgraded schematic design

Diagnosed and repaired defective electronic equipment Read blueprints, Schematics and industrial electrical code specifications

Prepared layout for machinery and controls Panels Troubleshoot and isolate faults in surface mount and overhead cables

EDUCATION/INDUSTRY TRAINING/TECHNICAL SKILLS

BSc (Eng.) degree in Electrical Engineering Eligible to register with APEGA

MMP Maintenance Management program in progress

PLC Programming, Variable Frequency Drive Certificates, Substation Construction, Arc Flash

Fall Protection, H2S alive, HCN, Safe Work Permit, OSSA, Electrical Safety, AWP, STS

First Aid and CPR, CSTS, LOG OUT TAG OUT

Bentley Nevada and Primavera P6 (UL Laboratories, United States)

Industrial Control Panel UL 508A and Short-Circuit Current Ratings

Good knowledge of VBA, C++, Assembler, Word, Excel, A+

Solid experience in Electrical AutoCAD and Excellent knowledge of AC and DC control circuits

Certified Master Electrician, CFAA Fire Alarm Fiber optic certification

Contact this candidate