Resume

Sign in

Power Plant Maintenance

Location:
Rawdat Al Khail, Qatar
Posted:
January 14, 2020

Contact this candidate

Resume:

Personal Details:

Name: Robert Barcelona Revillas

Date of Birth: December 22, 1968

Residence Abroad Address 2: Flat 4, Building # 32, Zone 27, Street 890, Umm Ghuwailina, Doha, Qatar

Email: adbaxw@r.postjobfree.com

Contact: +974-****-****

Employment History

Company Name: RUMAILLAH Facilities Management Co. (RFM) Position: Facilities Manager

Location: PO Box no. 2, Doha, Qatar

Commencement: September 30, 2017 till present

RFM is a facilities management company, with Qatar airway as one of its clients. As facilities manager of RFM, I am tasked to manage the hard maintenance services of following Qatar Airways commercial sites which engaged in several SLA contracts with RFM:

o Qatar Airways Tower-1 – Houses the main office of the airline’s CEO, as well as several other offices like the cabin crew training facilities, Finance, etc. o Qatar Airways Integrated Training Center – Which houses 6-simulator units for commercial jet liners for Boeing & Airbus. This is where pilots and flight crew are enhancing their training.

o Qatar Airways Old Technical Building – Which houses client’s medical commission, Integrated Operation Control Center, Central warehouse and several other offices

o Qatar Airways Sales Offices – A total of 20-Ticketing offices with average of 8- staff per office, strategically located all over Qatar. The following are some of the duties & responsibilities:

Oversite of the above commercial facilities of Qatar Airways per contracted scope. Liaise with the site in-charge (client’s facilities team & RFM site supervisor) to check

& assess the situation of the team and the work.

Conduct site walk-through for the Hazard identification & Risk Assessment. Review annually.

Prepared the Health & Safety manual for each contracted sites above. On annual basis, these are being reviewed & updated

Prepared each Site’s operation manual which highlight among others the equipment scheduled maintenance, site organizational structure, credentials of each worker, work procedures, contact scope, etc.. On annual basis these are being reviewed & updated

Conduct weekly SOP training to all RFM site workers.

Liaise with Safety officer for the scheduled monthly Toolbox Training on all sites.

Prepare & submit monthly operation report to client of each site.

Liaised with 3rd party contractors for the inspection & certification of selected equipment (e.g. sliding doors, gate barriers, roller shutter, legionella test, etc.).

Monitor the maintenance activities of contractors for specialized equipment like switchgears.

Perform other related task as needed on site.

From 2017 till 2018, managed the SLA contract of Abu Aboud tower, under RFM. The following are some of the scope of responsibilities:

Manage the hard and soft maintenance of Qatar Airway’s residential tower intended for male cabin crew. 2 x 8 storey tower comprises of 160 apartments with swimming pools & gym amenities.

Issue Defect Notifications to consultants for any defects found during the 400-days defect liability period.

Meet client & contractors for weekly meetings.

Manage the PPM of all other MEP equipment in the facilities

Liaised with the cleaning supervisor on site

Manage the waste system of the facilities

Liaised with the pest control contractor which is managed by the client

Issue work permits to contractors which includes general work permits, hot work permits, working in confined space, working in heights, etc…

Manage the Annual Maintenance Contract of specialized equipment which includes: o Chillers

o Chiller Pumps & Chemical dosing

o Elevators

o Water filtration system

o Tank cleaning

o Façade cleaning

o MV Switchgears & Transformers

o Stand-by Generators

o Fire Alarm & Firefighting

o CCTV & Gate barrier

Employment History

Company Name: ENOVA Energy Facilities Management Company by VEOLIA Position: Assistant Operation Manager

Location: 10th Floor Office 1003, Orchid Business Tower, Road 2835, Blk 428, AlSeef District, Manama Bahrain

Commencement: January 23, 2016 till May 5, 2017

Manage the SLA Facilities Management Contract (of client) which includes but not limited to Breakdown attendance and PPM of MEP equipment, AMC management of specialized equipment, other electromechanical & civil projects & requirement of the facilities.

Assign PPM tasks, (on Concept Connect) to the PDA devices of supervisors for the PPM of MEP equipment thru FSI-GO system.

Review the daily breakdown complaints attended by technicians and take immediate action to prevent any task from breaching the SLA that can be subjected to deduction on the monthly service invoice as per benchmark setforth in the agreement

Set and attend mitigation meeting with client to justify on breached SLA to avoid imposition of breached KPI penalty points.

Liaise with central call center for any P1 (Priority-1) complaint that can impact the benchmark setforth in the agreement. Coordinate with site supervisors to immediately assign and attend such complaint to prevent SLA breach.

Attend daily and weekly meeting with client and contractors for their concern and take immediate action based on priority level

Issue Defect Notices to contractors and engineers of any MEP & civil work defects, during the defect liability period of the facility.

Meet contractors & engineers and update the defects raised during the period. Liased with client and issue updated DN list.

Raise proposal/quotation to client of any breakdown noticed in the facilities and once approved, liaise with suppliers and contractors for the implementation of such request. Issue Job Completion certificate to contractors and/or suppliers upon completion.

Liaise with accounting department for payments to contractors and suppliers.

Prepare incident report to client, of any potential breakdown or incident that can impact the operation of the facilities

Submit safey tool box talk & Performance appraisal to the safety director on monthly basis

Comply HSEEQ site requirement

Conduct safety seminars to supervisors

Coordinate safety Officers during safety inspection on-site

Mediate dispute and impose disciplinary action to any employee found to exercise negligence in their work.

Employment History

Company Name: Al-Othaim real-estate investment & development co. Position: Mall Maintenance Manager

Location: Rabwah, Riyadh, Saudi Arabia, PO Box 28090, Riyadh 11437 June 8, 2010 – January 23, 2016

• Manage the maintenance department of Al-Othaim mall-Rabwah, which includes but not limited to Periodic maintenance & Repair of the following system:

TRANE Chillers units (9x500-TR Air cooled) & Chilled water system

YORK Air Handling units(64-units) and Fan Coil units (350-units)

BMS and low voltage control system

RO plant & Sweet/Raw water system

Fire Fighting and fire alarm system

Maintenance, trouble shooting & repair of all pumps and motors

CCTV, Public Address & Lighting system

Feeder transformers’ secondary system and Emergency Power system

• Responsible for the application and management of plans and procedures for the maintenance program of the mall

• Do regular rounds on all sites to ensure that all equipment are operating normally and satisfactorily.

• Receive complaints from mall tenants and assign maintenance personnel to attend such complaint, constantly review all maintenance work orders and follow-up pending applications, identify priorities and arrange scheduling of work according to importance and its impact on the operation of the mall

• Ensure the implementation of all preventive, corrective and improvement maintenance works, to its fullest extent and maintain log records for archiving

• Monitor the presence of all employees and delegate the work required of them and report the names of absentees thru the intranet system.

• Mediate disputes and impose disciplinary measures when needed.

• Ensure the cleanliness of work areas and equipment

• Conduct spot inspection on supervisors to make sure they fulfill the work required of them without compromise or neglect

• Attend regular meetings with the management of the mall

• Prepare monthly detailed report about the activity of the maintenance department

• Communicate with concerned department of the company to expedite purchase requests and ensure `proper tending of all maintenance request

• Communicate with administrators of tenants and discuss their problems and obstacles. Study such complaint and present appropriate solution.

• Investigation all aspects in the designs for new shops or projects in the mall and make technical recommendations to management to benefit the mall

• Check, analyze and organize the process of exchange (consumption) of materials and spare parts from the warehouse and recommend rightful procedure if deemed necessary

• Maintain high standard and professional quality of works in all aspects of maintenance department within the area of responsibility

• Responsible for the application of correct safety procedures in all areas of works Mall Maintenance Manager

at Mantech Real Estate Co., Ltd.

Location: Dammam, Saudi Arabia, PO Box 257, Dammam 31411, KSA Company Industry: Real Estate

April 2000 - April 2010

• Manage the maintenance department of FOUAD CENTER-Khobar cornice.

• Responsible for the operation, maintenance and improvement works of the Centralized A/C system 7x105-TR TRANE PACU and 8x110-TR TRANE ducted split. Direct expansion, Air-cooled.

• Oversee the operation, preventive & corrective maintenance of multi stage, Reverse Osmosis water conversion plant, TRISEP 8040 ACM2, Spiral wound membrane.

• Oversee the operation, preventive & corrective maintenance works of one 1-unit Stand-by Generator set

• Oversee the operation and maintenance of Elevators & escalators

• Oversee the operation, preventive and corrective maintenance of all automatic sliding glass doors and hallow metal panick-type emergency doors.

• Carryout installation works and oversee the operation, preventive & corrective maintenance works of CCTV, Public address and Fire alarm system.

• Initiate work programs and oversee the cleaning activities in the mall and its surrounding external facilities, including irrigation, landscaping and waste management system.

• Prepare energy and power consumption reports in MS Power point and PDF format.

• Review and communicate all external requests for maintenance department

• Evaluate job performance of each maintenance employees on yearly basis

• Prepare rough plans and drawings for any projects in the mall through AutoCAD

• Organize the shifting schedule of maintenance personnel

• Responsible for the safety and ensure the continuous operation of all equipment. Electrical Engineer

at Asia Brewery Incorporated

Location: Philippines, Km. 43 National Highway Bo. Sala, Cabuyao, Laguna Philippines Company Industry: Industrial

October 1993 - April 2000

• Design the 30MVA, 34.5KV overhead power distribution system of Asia Brewery Inc. Cabuyao plant.

• Supervised the wiring and termination of overhead 795MCM ACSR “condor” & 336.4MCM ACSR distribution system. Including the installation of its connectors, clamps and other tapping accessories.

• Supervised the electrical and instrumentation works of 3-units of 8,000 KW, 18PC2-5V FUJI S.E.M.T. PIELSTICK diesel engine coupled to 10,000 KVA FUJI PIELSTICK A/C Generator, 6,600 Volt output, type F525/34-14.

• Supervised the installation, wiring, termination and energization of the 3-units 10,000 KVA, 6.6/34.5 KV Step-up power transformers XIAN model SF-10000/35

• Supervise the installation, wiring, termination & energization of 6-units 35KV, 1200Amp, SF6 Gas Circuit Breakers “XIAN” type LW8-35 intended for system protection during fault condition

• Monitor andupervised the bench testing on transformers and power cables such as DBV of insulating oils, insulation resistance testing, AC & DC High potential tests, and impedance tests

• Supervised the termination of EPR and XLPE medium voltage primary line power cables using hot shrink and taping methods

• Supervised the works on PVC underground raceways, IMC and RSC wiring works, and wirings on wireways and wiretrays for the electrical system of the power plant

• Supervised the installation of 7.2KV, vertical standing, metal clad switch gears and its bus bar support and auxiliaries

• Supervised the bus bar wiring & installation of 5 x 7.2KV, 1.2KA draw-out type, Minimum Oil Circuit Breakers (MOCB) intended for low voltage (6.6KV) switching of AC generator unit

• Make detailed scope of works for outside jobbers to carry out other electrical projects that are beyond the scope of obligations of the operation and maintenance contractor of the power plant

• Perform computer simulation tests and logic circuit design for programmable logic controllers.

Electrician

at Tri-Asia Paper mill Inc.

Location: Philippines. Bo. Pittland, Cabuyao, Laguna Company Industry: Industrial, Paper mill

November 1992 – August 1993

Monitor the day-to-day operation of all equipment installed on production lines and report parameters’ reading and equipment performance on a daily log log sheet.

Perform electrical control wiring works for motor controllers and starters. Wirings include Wye-start Delta-run, Autotransformer reduced voltage wirings, across-the-line starting scheme and soft start magnetic contactor control wirings.

Perform IMC & RSC wiring works, PVC underground raceways, wirings on wireways and wiretrays system, and knob and tube wiring works.

Perform maintenance and troubleshooting works on pneumatic and hydraulic instrumentation system of paper mill production line.

Perform maintenance, repair and troubleshooting works on all induction motors’ power and control system installed on paper mill production line.

Perform maintenance and repair works on the DC system of paper roller machines. This also includes the maintenance and repair of synchronous motors.

Perform maintenance and repair works on the plant’s overhead travelling crane unit. DEMAG 50 ton main hoist & 5 ton auxiliary hoist.

Monitor, maintain and repair all plant’s lighting system and apparatus.

Perform minor mechanical works such as Oxy-acetylene cutting and/or welding works, electric arc welding fabrication works.

Perform other functions as required by the plant’s electrical and instrumentation Supervisor.

Academic Qualification:

SCHOOL : WESTERN MINDANAO STATE UNIVERSITY (WMSU)

LEVEL : Bachelor’s degree / Graduate

YEAR : April 1986 – April 1992

PLACE : Zamboanga City, Philippines

COURSE : Bachelor of Science major in Electrical Engineering (BSEE) SCHOOL : WESTERN MINDANAO STATE UNIVERSITY

YEAR : April 1991 – May 1991

PLACE : Zamboanga City, Philippines

COURSE : Government Internship Program for Summer Youth SCHOOL : WESTERN MINDANAO STATE UNIVERSITY, EXTEN. SERVICES YEAR : July 1990 – October 1990

PLACE : Zamboanga City, Philippines

COURSE : Television and Radio Technology

SCHOOL : SOUTHERN CITY COLLEGES

LEVEL : High school / Graduated with honor

YEAR : April 1982 – March 1986

PLACE : Zamboanga City, Philippines

SCHOOL : BOALAN ELEMENTARY SCHOOL

LEVEL : Primary school / Graduated with honor

YEAR : March 1976 – March 1982

PLACE : Zamboanga City, Philippines

Training Qualifications:

TITLE : NEBOSH IGC 1 & 2 (International General Certificate 1 & 2) YEAR : December 2019

PLACE : DISS, Doha Qatar

TITLE : REINFORCED CONCRET DESIGN & CORROSION CONTROL YEAR : January 2012

PLACE : KFUPM, KSA

TITLE : OPERATIONS & FACILITIES MANAGEMENT

YEAR : September 2006

PLACE : Dubai, UAE

TITLE :PROFESSIONAL DEVELOPMENT – Operation and Facilities Management essential skills

YEAR : September 2006

PLACE : Dubai, UAE

TITLE : FUNDAMENTALS OF LUBRICATION

YEAR : April 1999

PLACE : Laguna, Philippines

TITLE : ELECTRICAL CORROSION CONTROL TECHNOLOGY and LOW VOLTAGE SWITCHGEAR DRIVES and CONTROL TECHNOLOGY

YEAR : February 1996

PLACE : Laguna, Philippines

TITLE :LIGHTING PROTECTION SYSTEM and POWER and DATA LINE PROTECTION, ILLUMINATION, DESIGN and its APPLICATION YEAR : March 1995

PLACE : Laguna, Philippines

TITLE : OVERCURRENT PROTECTION

YEAR : March 1992

PLACE : Zamboanga City, Philippines

TITLE : BETTER VISION FOR NEW TREND IN ELECTRICAL

ENGINEERING PRACTICE

YEAR : February 1989

PLACE : Zamboanga City, Philippines

PROFESSIONAL AFFILIATION:

Member of Saudi Council of Engineers (2011-Present)

Member of Middle East Council of Shopping Centers (2006-2007)

Member of Institute of Integrated Electrical Engineers of the Philippines, Laguna Chapter

OTHER PERSONAL SKILLS AND ABILITIES :

Computer Literate (Able to set-up system)

Knows Basic AutoCAD

Knows Basic M/S Office ( Words ; Excel ; Power Point, etc)

Knows driving with valid Bahrain Driving License



Contact this candidate