Page * of *

Tahir Javed (P. Eng.)

G-*** Michener PK NW

Edmonton, AB, T6H 4M5 Canada

adb6e0@r.postjobfree.com, 587-***-****

OBJECTIVE

Actively seeking a senior protection and control design position in reputed organization where I can utilize my experience in protection & control, design, installation, testing & commissioning of substations, relay settings and coordination, engineering, tendering, procurement of substation equipment as per engineering standards and practices. Highlights of Qualifications:

• Electrical engineer with over 20years of progressively responsible experience from conceptual design to construction and commissioning of substation for utilities, oil & gas, EPC and EPCM Projects

• Protection & Control design engineer, expert in design, testing and commissioning of substations

• Experience in engineering, tendering and its evaluation, procurement and construction of high voltage air insulated as well as gas insulated substations

• Expert on modern protection and control, SCADA and communication systems and have extensive experience in energized high voltage / medium voltage substations

• Excellence in design and review of control, protection and Tele protection schemes up to 500 kV substations

• Expertise in electrical utility protection & control systems, system integration, trouble shooting, testing and commissioning work, specification writing

• Effectively participated in FAT and SAT program relevant to protection and control panels, AC/DC panels, different relays, transformers, MV, LV switchgears and battery banks

• Excellent skills in relay setting calculations, setting coordination work, power system modeling, load flow and short circuit analysis, reliability and security assessments, and tender preparation and evaluation

• Experience with IEEE, ANSI, IEC & CSA standards

• Extensive experience in handling, programming, testing and commissioning of various Protection relays types such as GE, SEL, ABB, AREVA, and SIEMENS, etc.

• Expertise in installation of wire, cable, equipment, components and devices associated with protection, SCADA and other electrical systems

• Proficient in use of AutoCAD, Microsoft Office,virtual power network (VPN) and SAP

• Team player, ability to work independently or as a team member, meet deadlines, detail oriented Education

B.S Electrical Engineering from University of Engineering & Technology Lahore (UET) – 1988 Special Training Courses.

• Work share training at Giffels Associates Limited/IBI Group, Canada

• Training on GIS/AIS switchgears and substation automation by Siemens and Areva Canada

• Training on protection relays and substation automation by ABB Canada

• Training on power transformer, motor, generator protection, bus bar differential and substation automation by SEL Canada

• ABB's Products & Solutions for protection / substation automation & Utility Communications Canada

• Certification in AutoCAD and Training arranged by ABB on pyramid substation automation REL511, 521,531

• Training by Alstom on protection of power system including non- directional and directional earth fault protection, restricted and unrestricted earth fault protection, T/F buchholz, feeder protection etc

• Management Information System Course WAPDA, Pakistan duration 12-weeks

• Substation System Maintenance Crew training- WAPDA, funded by (CIDA) duration 1-year

• WAPDA Technical Course: 6 month Power System Training at Faisalabad Academy-Pakistan

• WAPDA Management Course: 6 month Management Course from WAPDA Tarbela-Pakistan

• Proficient in the engineering software’s like ASPEN One liner, ASPEN Line Constant, PSS/E, ETAP, SAP

• Relay Programming Sets and Testing Software

• Test Sets Freja 300 Severker 750,760 Omicron CMC 356 XS 92 Software’s CAP540 Digsi 3.1 Enervista Freja win AcSELERATOR QUICKSET SEL-5030 Page 2 of 3

Professional Experience:

Senior P&C Engineer at Enercube Switchgears Inc. Oct.2018 to March,2019 Worked at Enercube Switchgears Inc. Edmonton Canada as a Senior Protection & Control Engineer. Responsibilities are

• Prepare SLD, 3-Lines diagram, DC Schematic, wiring diagram using Auto Cad for different Projects.

• Assisting in Panel manufacturing and QA/QC

• Detail engineering with efficient and reliable Protection & Control systems.

• Coordinated design activities with other multi-discipline project team members

• Preparation of tender documents and proposing cost effective solution, Project management Senior P&C Engineer at WSP USA Oct.2017 to March.2018 Worked at WSP NY, USA as a Senior Protection & Control Engineer on RG&E and NYSEG Bulk Electric Supply Projects.

• Comments Approval on SLD, Relay SLD, Integration Diagram, Telecommunication Diagram of different sites

• Worked on Remote End Protection for implementation and selection of proper relay and communication schemes

• worked within a multi-discipline team to develop efficient and reliable Protection & Control systems.

• Coordinated design activities with other multi-discipline project team members

• Carried out/review/analyze complex technical studies and project scopes and conceptual design

• Maintained good working relationship with internal groups that support project such as other Engineering disciplines, Drafting, Procurement, Construction and Project Management etc

.Consultant on Call Power Tek Jan, 2016 to Sep, 2017 Worked as a consultant on call with different firms like Power Tek Global Inc. working in North America, Pakistan and UAE to resolve substation protection problems and helped them in tendering/quotations for different s/s and generation projects Senior P&C Engineer at Jacobs Engineering Inc. Canada May, 2014 to Sep, 2015 Major responsibilities involved preparation of protection schemes, SLD, 3-lines diagram, AC, DC schematic, interconnection, alarms and wiring diagram, panel layout, communication diagram, kirk key diagrams, CT and PT connection diagram, relay finalizing ordering code and follow up with panels manufacturer till inspection, designed complete protection schemes like Transformer using 487E, T60, Bus bar using 487B, B90 and MTM Auto bus transfer schemes using F60 relay, Line differential protection using SEL411L and P544, and feeder management relay using SEL 751 Solved field substation problems for Enbridge, successfully completed no of substations up to 230KV for Enbridge including Clipper Expansion-2 and Line-3 replacement Enbridge Pipe lines projects like St. Leon, Hardisty AB Terminal, Matisko, Cactus Lake, Kerrobert, Herschel, Milden, Bethune, Richardson, Odessa, Glenboro, etc Manager P&C at PEL (Pak. Elektron) July, 2012 to Sep, 2013

• Prepared/Reviewed 220/132 kV GIS substation Protection and control drawings, drawings submittal and technical discussion with consultant/client, incorporated changes in drawings if required

• Get approved set of drawings from consultant and release them for construction

• Conducted factory acceptance test (FAT) of relay and control panels in the presence of consultant/client at our factory.

• Relay finalization with client/consultant and ordering with proper ordering Code.

• Coordinated and lead in providing SEL Relays training to 8 no’s of engineers of client/consultant/and Field Formations of NTDC at Dubai SEL office.

• Arranged and managed to visit for FAT of ABB PLC/SCADA Equipment with client/consultant at ABB Factory in Switzerland and Germany,

• Responsible of getting local representation of SEL and RMS relays from US/Dubai and Australia respectively

• Installed and commissioned 2 Nos. auto transformers of 160MVA 220/132kV and 1.No power transformer

• Procurement of 220V and 110V DC battery bank and its FAT in the presence of client at manufacturer premises

• Installation and interconnection of relay and control panels and battery bank at site

• Designed and got approval of RTCC panels for auto Transformers from Client/Consultant

• Management, planning, scheduling, budgeting and supervision of 5-nos 132/11kV S/S MEPCO projects Page 3 of 3

P&C Specialist at Stantec Consulting Canada April, 2010 to Jan,2012

• Prepared AC/DC schematics for 500/230/46 kV Riel Manitoba Hydro project in coordination with AREVA Canada.

• Fully responsible of designing 500/230/46kV, 1200MVA, Auto transformer bank AC schematics drawings

• Designed protection SLD for the entire substation along with S/S Automation information

• Designed of 500kV lines and Reactor protection drawings using SEL and Micom relays

• Prepared 230kV lines and 20MVA,230/12.47 kV power transformer protection drawings &12.47kV AC/DC schematics

• Prepared relay settings for El Smith water treatment plant for blow water and back wash pumps and feeder using GE motor management relay 369, 469 and 750

Senior Electrical Designer at Giffels (GAL) / IBI Group Canada June, 2008 to Sep, 2009

• Designed line protection & control, schematic and wiring drawings for 115kV, 69kV, 44kV, 34.5kV, 27.6kV and 13.8kV transmission and distribution network of utilities like Hydro One Network Incorporation (HONI)

• Designed protection upgrades from electromechanical and static protection relays to microprocessor relays

• Provided technical assistance to other Senior engineers and Managers in their projects

• Detail designed services to complete various T&D projects. .Provided project engineering to capacity upgrade of existing transformer (PC&T in a box), complete protection and control design, SCADA, The scope of work also included preparation of technical specifications of 13.8kV metal clad air insulated switchgears (AIS), revised existing single line diagram (SLD), electrical arrangement drawings (EA), electrical wiring diagrams (EWD) Assistant Manager P&C at WAPDA Sep, 2003 to May, 2008

• Designed and reviewed of schematics and interconnection wiring diagrams of 220 kV,132kV and 11 kV substations and installation / commissioning at site

• Preparation of AC / DC schematic and interconnection of control and relay panels drawings, reviewed panels lay out drawings, proposed technical comments and approval

• Modified project design drawings and verified field wirings of no of substations including field commissioning

• Setting calculations of electromechanical as well as microprocessor protection relays for various substations. The typical example of these relays are: SEL 421, 7SA522, 7SA513, PYTS, Micromho, SHNB 102

• Distance Relays: SEL 421, 7SA522, 7SA513, PYTS, Micromho, SHNB 102, L8b, LZ96, SEL 487B, 7SJ600 P&C Consultant at BC Hydro Canada July, 2001 to Dec, 2001

• Revised AC, DC schematics and wiring diagrams for a number of substations

• Modified all other station drawings to reflect the changes being made with revision

• Prepared bills of material (BOM) & system protection requirements (SPRs)

• Added new alarms to the existing alarm system and modified all related drawings

• Get the concerned drawings issued from the drawing section used for modification

• Submitted modified drawings with revision number to the drawing section after completion of project

• Prepared as built drawings and submitted updated drawings to the concerned drawing section

• Completed detail design and interconnection of an application ‘under frequency auto load shed and restoration program’ on distribution feeders using SEL381 on the following BC Hydro network substations like Puntaledge, Prevost, Mainwarring, Strawberry Hills, and Annacis substations Assistant Engineer (O&M) at WAPDA May, 1991 to Sep, 1999

• Inspected new substations, and checks for the recommended installation of equipment, correct wiring, and proper connections and mark any field note on the drawings and submit to the concerned department for their record

• Supervised testing, and assures proper functioning of new equipment prior to energizing

• Responsible in load restoration after system disturbances, and participated in establishing plans and procedures

• Participated in pre-design meetings for proposed projects. Prepared technical, economic, and other reports related to the transmission and distribution system's protection, design, construction, operation and maintenance Electrical Engineer Marketing at Siemens and SDC June, 1988 to May, 1991Managed sales and marketing of substation Equipment and its spare parts by targeting, Refineries, Textile industries, Chemical plants, Paper mills, and utility power plants, Major clients were WAPDA and textile industries

• Prepared indents and advised factory for manufacturing switchgear and relay and control panels

• Manage project schedules and coordinated between clients and our manufacturing unit in order to make delivery in time Managed project budgets and obtain permits for operations during installation and commissioning projects

• Engineering calculations, Problem investigation and compliance in connection with field and office assignments

Contact this candidate