Directional Driller engineer
Resume:
Juan Carlos Rodríguez Jiménez.
*** ** ***** ** *** Virtudes.
Fraccionamiento Paseo de las Reynas IV
Mineral de la Reforma Hidalgo, México, 42184.
*******@*******.***
University Studies (2001 - 2005)
Universidad Del Valle de México, Hispano campus, México state, Coacalco city.
Communications and electronics engineer.
OBJECTIVE:
Occupy a place and directly to the company according to the needs of it, through the availability and teamwork, with a view to optimal planning and development to start and end a process in the place and correct responsibilities on the work area.
WORK EXPERIENCE:
Grupo industrial de Tabasco S.A. / Integradora de perforaciones y servicios
Company dedicated to the development and drilling operations on petroleum engineering services.
Offshore fields/Onshore fields in Mexico.
Directional Driller Engineer Sr.
June 2015 – Currently 2020.
http://www.gitsa-mexico.com/
•Responsible and leader of all directional drilling operations (OFFSHORE/ONSHORE), all profiles and trajectories: Conventional wells, Vertical, J, S, Nudge, and Horizontal, 3D
•BHA s Design & selection (rotatory, navigable, oriented, and packed), Depending on the type of trajectory to be performed.
•Build and develop the planned trajectory, analyzing each survey to execute the directional program as well projections.
•Execution and management of software for drilling well development.
•I analyze the drilling mechanic plots as well as the correlation wells, to loknow the geology age and give the maximum performance to the tools while drilling.
•Anti colision experience (Mitigation of torques, drags, shocks and vibrations, optimum cleaning of hole.)
•Provide real-time attention and technical support to customer on work site.
•Coordinate real-time operations on work site.
•Check & inspection of all DD company equipment delivered on the work site.
•I am present on rig floor all necessary times when the BHA is assembled as planned, to be sure the correct make-up torque, when manipulated and screwed.
•I make the correct programming of the tool & perform surface testing (shallow hole test).
Drilling & Measurement Offshore.
Company dedicated to the development and drilling operations on petroleum engineering.
Gulf of Mexico.
Directional Driller specialist II.
March 2011- February 2015.
http://www.slb.com/
Company dedicated to the development and operation of petroleum engineering.
●Leader with strong knowledges of all operations & development of directional drilling on site (OFFSHORE-ONSHORE), all profiles and trajectories designed.
Wells profile:
Nudge, Vertical, J, S, ERD (Horizontal 3D), Whipstock Orientation (Track-master) inside-casing side track, Open Hole Side Track
My responsibility is to develop trajectories of directional drilling with tool and technology created by Schlumberger Steerable Systems & Drilling Mud Motors such as:
PowerV (Steerable Systems).
PowerDrive vorteX.
Power Drive X5, X6.
Power Drive Xceed.
PowerDrive Orbit.
PowerDrive Archer.
PowerDrive UltraHT.
PowerPak (Down hole motors): Extra Power (XP).
Greater Torque (GT).
High Speed (HS).
High Flow (HF).
Bottom Hole assembly (BHA) selection and aspects of DD performance and ensures that BHA's are assembled as planned including correct make-up torque, doping and handling.
I make the analysis of the different wells to be drilled (correlation between closer wells, drilling mechanic data & plots ), collision (anti-collision), Torque & Drag as well all kind of Shocks and vibrations (Torsional, axial, lateral, Stick & slip), Rheology and Drilling Mud type to use (Water-based mud, Oil-based mud, densities, plastic viscosity, yield point, nozzle optimization, very important the hole cleaning and checking all time the ECD (Equivalent Circulation Density)and annular pressure, pressure drops at all system, always have the quality control, Geological columns) profiles and directional trajectories, sophisticated design of BHA.
I drive the software for the development, control and monitoring of the well in directional operation according of the plan, they are inserted (SURVEY) observed and analyzed by the measurements tools (MWD) records, MD's (measurement depth), Inclinations, Azimuth, TVD, displacements, Severities (dogleg) where from these data continues to build angle or curve, as well as maintain and control tangents.
Maintains records of all DD equipment at well site including dimensional data and condition.
Operationally:
•Before at anything the Pre-job is fundamental part to be success, at any drilling operation, all participants: (Drilling Engineers, Drilling operation support, Directional Drillers, ML/WD Operators, Bit technical, Chemical Engineer etc.) to talk about the well operation, as well make the EOWR to have a data base to futures wells on same zone (correlation).
•Relationship and communication with the client for detailed proposals and objectives of tool to use and plan to continue for directional well development drilling.
•Generate daily transaction reports and send them to all personnel involved in the operation and development of directional well (coordinator, well planners, supervisor, superintendent, company man and client).
Drilling Services onshore.
Reynosa Tamaulipas México, Poza Rica, Veracruz México
Villa Hermosa, Tabasco. México
Directional Driller Engineer I
July 2008- November 2010.
http://www.weatherford.com
CIA. Dedicated to the development and operation
Petroleum engineering.
Responsible for carrying out directional drilling, check and operate tool BHA (PACKED, NAVAGABLE, ORIENTED and ROTATORY SISTEM RSS)
Running software for the development, control and monitoring as well type in directional operation according to plan where observed and analyzed inserted SURVEY's: MD's, tilts, Azimuth, TVD, displacement, Severities (leg dog or dogleg) where from these data continues to build angle or curve, as well as maintain and control tangents and / or decrease angle monitor developing vertical wellbore.
●Operationally:
Drill holes type: Nudge, V, J, S
●Logistically give input and output to the tool based on location operations such as drilling equipment, send it in a timely manner or with certain anticipation.
●Stay on field operations.
●Operator responsible for assembling and operating analysis tools (drills) and optimal operating conditions (WEIGHT ON BIT, RPM, GPM) for drilling oil and gas wells to verify the development of this tool during drilling uptime (ROP).
●Drilling hydraulic calculations (DIAMETER AND NUMBER OF NOZZLES, TFA, PRESSURE DROP IN BHA, HCI CLEANING INDEX, FORCE OF IMPACT, GPM, PRESSURE PUMP, EPM ETC.)
●Knowledge of the different types of bits (PDC, TRICONE, BICENTRIC.), Types of Pins and their respective tightening.
Training:
●DIRECTIONAL DRILLER SPECIALIST, MAY 2014, SUGARLAND TEXAS BY SCHLUMBERGER.
●D.O. (DRILLING OPTIMIZATION), OSC (OPERATION SUPPORT CENTER), REAL TIME OPERATIONS *RTO BY SCHLUMBERGER
SIBERIAN TRAINING REMOTE CENTER (TYUMEN RUSSIA) DECEMBER, 2013 BY SCHLUMBERGER.
●DRILLING OPERATIONS at MLC (Middle East and Asia Learning Center) Abu Dhabi, United Arab Emirates (UAE), May 2013, BY Schlumberger.
●DIRECTIONAL DRILLER II, Training Weatherford center, Poza Rica Veracruz Mexico, Operation Center, April 2010.
DIRECTIONAL DRILLER I, Training Weatherford center, Boca Del Rio Veracruz Mexico, June 2009.
●OTHERS: SAFETY, FIRE PROTECTION, DEFENSIVE DRIVING, H2S, ANTI-COLLISION, SHOCK & VIBRATION, TORQUE & DRAG, SIGNATORY, SEA BOOK, RIG PASS, SSPA.
GENERAL INFORMATION
Mexican, Married, 42 years.
PC Operating Management, office management suite.
Willingness to travel and schedule.
High sense of urgency and responsibility.
High willingness and teamwork.
American Visa.
Mexican Passport.
Contact this candidate