EXPERIENCE

October **** – present: Commissioning Engineer Manager, MMR Constructors Inc,

Trinidad and Tobago.:

• Led and Developed plant commissioning schedule and procedures

• Supervised, monitored and recorded execution of activities by subcontractors and vendor

• Provided consultancy of new catalyst and its performance during Iowa Fertilizer Company July 2019 outage

• Gained knowledge in Advanced Process Control and Aspen Hysys optimization models (AspenTech OPTIMIZE 2019 Conference) April – October 2018: Lead Process Engineer, Iowa Fertilizer Company Limited (on behalf of MMR Constructors Inc.)

• Led Process data gathering and Process Hazard Analysis (PHA) for Ammonia Plant revamp case

• Initiated Management of Change (MOC) for Operating Expenditure

(OPEX), Winterization and Shutdown jobs

• Member of Management of Change (MOC) Review Steering Committee team

• Led Cooling Water exchangers performance test

• Led Catalyst Performance Test

• Shutdown and startup experience of 2200MTPD Ammonia KBR Purifier process

• Gained knowledge in Yokogama Operator Ammonia Plant Simulation September 2017 – March 2018: Process Engineer Consultant, E&A Consultants Guyana

• Analyzed and made recommendations on client’s sewage package treatment plant.

July 2011 – August 2016: Process Engineer II, Atlantic LNG Company of Trinidad and Tobago

• Process Engineer Commission Lead Train 3 New Dehydrator Inlet Separator Project: Managed project schedule, contractor management and completed all value assurance review (VAR) queries by completing reports and issued commissioning Report to Management

• Process Engineer Commission Lead for Trains 1, 2 & 4 Acid Gas Incinerator Upgrade Project: Completed revised Piping and Instrumentation Drawings P&ID and issued Commissioning report to Management

• Led Capital Expenditure (CAPEX) and Operating Expenditure (OPEX) Related Projects within time and budget: Car Seal Listing Project, Hazard and Operability Study (HAZOP) and Process Hazard Analysis (PHA) studies

• Provided process engineering expertise in Piping and Instrumentation Drawings (P&ID) Updates, Root Cause and Failure Analysis (RCFA) and Safety and Operability Integrity (S&OI) Action Items

• Mentored Junior Engineers in project assignments

• Familiarised with some of major engineering standards: American Petroleum Institute (API), American Society of Mechanical Engineers

(ASME), British Petroleum (BP) and British Standard (BS) international codes

May 2008 – June 2011: Process Optimization Engineer II, Atlantic LNG of Trinidad and Tobago

CLAUDIUS STEWART

COMMISSIONING ENGINEERING MANAGER/LEAD

PROCESS ENGINEER/LEAD PROJECT ENGINEER

ADDRESS: MOONILAL AVENUE, ESMERALDA ROAD,

CUNUPIA

MOBILE: 868-***-****

EMAIL ADDRESS:

adb2e0@r.postjobfree.com,

adb2e0@r.postjobfree.com

SUMMARY

Energy expert with 16 years Process and Project

Engineering experience in the downstream gas

sector specializing in managing projects, contractor management and leading teams to success

OBJECTIVE

To contribute significantly to high performance,

integrity and best practices of the organization

SKILLS & ABILITIES

Aspen Hysys, Promax, C programming, Flow Orifice

& Control Valve Sizing, Matlab, all Microsoft Suite program, PHA Pro and Superchems

2

CLAUDIUS STEWART

COMMISSIONING ENGINEERING

MANAGER/LEAD PROCESS ENGINEER/LEAD

PROJECT ENGINEER

ADDRESS: MOONILAL AVENUE, ESMERALDA

ROAD, CUNUPIA

MOBILE: 868-***-****

EMAIL ADDRESS:

adb2e0@r.postjobfree.com,

adb2e0@r.postjobfree.com

• Minimized production loss on trains 1, 2, 3 at an average of 35% from 2008 to 2011

• Supervised and coordinated process optimization shutdown activities for Trains 1,2,3

• Provided process engineering support and advice to utilize Train 1, 2 and 3 Advanced Performance Control (APC)

• Process Optimization Lead: 2010 and 2011 Atlantic LNG Benchmark surveys

• Process Lead for shutdown related jobs with the Shutdown planning team in May – June 2009

May 2003 – April 2008 Process Engineer II, PCS Nitrogen Trinidad Limited: 02 Ammonia Plant Lead Process Engineer (January 2007 – April 2008)

• Led request for tender and supervised contractor for catalyst change out of Methanator and Low Temperature shift (LTS) catalyst

• Led 01 & 02 Ammonia plants performance test and performance test on major pieces of equipment (e.g. boilers, heat exchangers, major pumps, turbine driven compressors)

• Coordinated 02 Ammonia plant degreasing of revamp exchangers

• Provided engineering support in tender for new Outside Battery Limit

(OSBL) diesel fire water pump

• Participated in 02 Ammonia Plant Revamp Operator Training Simulator

(OTS) Project

01 & 02 Ammonia Plant Revamp Project Engineer, PCS Nitrogen Trinidad Limited (June 2005 – June 2006)

• Developed 1550 to 1800 Short Tons Per Day (STPD) revamp hysys model

• Sized new flow annubars, flow orifice and control valves for the 1800STPD revamp case using relevant sizing software

• Coordinated process condensate stripper upgrade

• Coordinated 02 Ammonia Plant degreasing of revamp exchangers

• Coordinated catalyst changeout and Low Temperature Shift (LTS) catalyst reduction activities

• Gained de-commissioning and re-commissioning experience 01 and 02 Ammonia Plants

04 Ammonia Plant Revamp 2005 Project, PCS Nitrogen Trinidad Limited

(April 2005)

• Sized new relief valve for passing medium pressure sparging steam flow to the Low Temperature Shift (LTS) reactor

• Sized new inlet block valve for High Temperature Shift (HTS) reactor to provide isolation

• Supervised catalyst changeout and coordinated main and parallel Low Temperature Shift (LTS) catalyst change out and reduction Urea\Urea Formaldehyde (UFC-85)\Demin Lead Process Engineer, PCS Nitrogen Trinidad Limited (May 2003 – December 2006)

• Led performance test on main pieces of equipment (e.g. boilers, heat exchangers, major pumps, turbine driven compressors)

• Process lead for 2004 urea turnaround (TAR) projects

• Process Lead for 2008 urea turnaround (TAR) projects and Urea Formaldehyde (UFC-85) projects and shutdown activities

• Planned, budgeted and executed project schedule for carbon filter and resin change outs

3

CLAUDIUS STEWART

COMMISSIONING ENGINEERING

MANAGER/LEAD PROCESS ENGINEER/LEAD

PROJECT ENGINEER

ADDRESS: MOONILAL AVENUE, ESMERALDA

ROAD, CUNUPIA

MOBILE: 868-***-****

EMAIL ADDRESS:

adb2e0@r.postjobfree.com,

adb2e0@r.postjobfree.com

COMPUTER SKILLS

• Aspen Hysys, C programming, Control Valve sizing, Design Flow Solution, Matlab, Microsoft Office Suite, Microsoft Visio, Promax EDUCATION

• 2008: University of the West Indies, St. Augustine: MSc. Production Management

• 2003: University of the West Indies. St. Augustine: BSc. Chemical and Process Engineering

AFFILIATIONS

• Senior Member of American Institute of Engineers

• Member of Board of Engineering of Trinidad and Tobago (BOETT)

• Member of Association of Professional Engineers of Trinidad and Tobago

(APETT)

PERSONAL ACHIEVEMENTS

• Awardee: 2012 Atlantic’s CEO Sustainability Award – One day defrost

• Author: “APETT Chemical Engineering Newsletter Issue 1”, September 2015, Article: Presentation of papers in the Conoco Phillips LNG Conference – October 2014

• Author: “APETT Chemical Engineering Newsletter Issue 1”, March 2013, Article: Safety Bypass Override

Contact this candidate