Himanshu Sharma
Electrical Engineer
Email: **********@*****.***
Contact: 096********, 907-***-****
Snapshot
●An experience of Testing & Service up to 400kV instrument Transformer.
●Expertise across huge corporate end users, big consultants & customer relationship management.
●Erection and commissioning of 400/220kV GIS and Electrical equipment
●Erection and commissioning of 500MVA Transformer and 125 MVAr reactor
●Outdoor and indoor Earthing work.
Organizational Experience:
GE T&D India Ltd. as Electrical Site Engineer at 400kV GIS Kadarpur Nov.’ 2018 – Till Now
Key results Area:
●Erection and commissioning of 400/220kV GIS.
SF6 gas filling as per IEC 60376
Checking and treatment of SF6 gas as per IEC 60480.
Conducted high voltage test as per IEC 62271-203.
Measurement of partial discharge as per IEC 60270.
Conduct CRM and DCRM test for circuit breaker as per IEC 62271-100.
Conduct the CT testing as per IEC 61869-1 & 2.
● Erection and commissioning of Electrical equipment.
Conduct the CVT testing as per IEC 61869-1 & 5.
Conduct the WT testing.
●Erection and commissioning of 500MVA Transformer and 125 MVAr reactor and conduct testing of Transformer as per IEC 60076.
●Outdoor and indoor Earthing work.
●Illumination work of indoor building and outdoor area.
●Submitted progress reports throughout a job so customers always stayed in the loop
●Listen to customer complaints, and work tirelessly to pinpoint the root cause of the problem.
●Daily work plan and team management Supervision.
●Attend the daily and weekly meetings and report the activities and daily progress to Project management
●Ensure that availability of resources( Materials & Human )
●Billing Preparation as per BOQ
●Quality checking the materials as per FQP.
●Maintain the all necessary records & documentation
●Monthly invoice Preparation and raising.
●To co-ordinate with Electrical Contractor for Electrification, Execution, Erection & Commissioning.
●To check the entire work as according to approved drawings and FQP.
●Witness the Testing and commissioning of all the electrical equipment and sign off the relevant document for acceptance.
●Review and forward any comments on the contractors testing & Commissioning plan /procedures /method statements.
Mehru Elec. & Mech. Engineers (P) Ltd. as Sr. Engineer June’09 – Oct.’2018
Company Profile: MEHRU, an Indian company established in the year 1997, is as ISO 9001, 14001 & 17025 company manufacturing instrument transformer i.e Current transformer, Potential transformer & capacitor voltage transformers up to 420kV.the products manufactured by MEHRU incorporate the best modern technology, to ensure a good quality product. All the instrument transformers have been type tested as per IEC 61869/IS/ANSI. Mehru has own ISO 17025 certified Testing Lab up to 400kV Instrument transformers.
Key results Area:
●To conduct testing of HV products up to 400 kV ratings to ensure timely compliance to IS 2705 & IS 3156/IEC 61869/ANSI standards and customer specification.
●Conducting all Routine tests & Type test up to 400kV instrument Transformer like CT, PT, CVT & CC as per defined schedule in coordination with production department.
i) Partial discharge, Power Frequency test & dissipation factor as per IEC 61869.
ii) Ferro Resonance test, Transient Response test & Short Circuit test as per IEC 61869.
iii) Temperature rise, Thermal stability & temperature Co-efficient as per IEC 61869
iv) determination of error, Knee Point test & ISF Test etc as per 61869.
●To coordinate with CPRI/ERDA for all require Type test as per IEC 61869.
●Interacting with customers like PGCIL, NTPC, TANTRANSCO, RDSO & Private parties for all their Type test and special test requirement.
●Make the final customer test report as per standard.
●Maintain the record of calibration status of the instrument used in Inspection, Internal Testing & NABL Audit
●To maintain 5S activity & enhance safety practices during testing.
●Examine the fault & solving it (both electrical as well as mechanical) by referring the documents
●To support testing managers during audits (ISO, NABL & Safety) by keeping the relevant records updated.
●Supervise & carry out the customer inspection independently.
●Ability to work independently and handle the day to day work load
●To coordinate with team to maintain flow of testing.
●Make the NABL audit documents as per SOP
●Keep records of quality reports & relevant documentation.
●Maintaining & taking care of all calibration of all the testing equipment’s in our lab.
●Allocates adequate manpower for each testing process and coordinate with HR department.
●Preparation of daily/weekly/monthly Report through ERP data
●To analyze the cause of failure in testing process and take necessary Corrective and preventive action to avoid their reoccurrence in future.
●Coordinate with maintenance department for implementation of corrective and preventive maintenance
●Ability to identifies site technical problems and makes analysis through remote or on-site activity in different Service categories.
●Ability to performs Service tasks like installation and commissioning of equipment and routine maintenance independently.
●Ability to Contributes to customer satisfaction by executing Service work according to customer order and expectation & make good relationship with customers.
●Ability to Identifies new sales opportunities and communicates with them internally.
●Ability to Coordinates, prepares and ensures that all materials, parts and equipment are available and at the appropriate quality for Service activities.
●Prepares all documents and reports to be signed by the customer representative. Reports work done in a timely manner and follows up when needed and Maintaining data in ERP for all our service activity.
●Ability to Troubleshoots simple equipment failure and makes sure to avoid repeating the problem in the future.
●Ability to Provide recommendations to management to improve operations and customer service.
●Ability to applies safety rules and safe practices as well as environmental responsibilities. Reports unsafe practices and incidents.
●Take care of Day to Day service activities like sending the quotation both technically and commercially, chasing up with the clients for the orders etc.
●Follow up regarding payments.
●Coordination with the site in-charge during offer stage till the execution.
Pyramid Engineers India (P) Ltd. as Engineer (Site Engineer) Nov.’08 – June’09
Key results Area:
●To look after the 220 KV substation Equipment’s Erection.
●To make the daily Inspection record for the equipment. If equipment needs maintenance, then take the necessity action for it. Minimize the chances of break down.
Essar Steel SEZ Ltd. as Diploma Engineer Trainee June’07 – Oct.’08
Key results Area:
Worked in the 220 kV Main Receiving Substation for the recently arriving Corex process of the steel making Organization. Main work is to erection of 220 KV Switchyard. To read the lay out drawing of SLD and connection diagram for the incoming and outgoing bays.
Academic Credentials:
●Diploma in Electrical Engineering from Govt. Polytechnic College, Alwar in 2007
●12th from Govt. Higher Sec. School, Khairthal, Rajasthan in 2004
Training & project:
●24 days at 220 Grid Sub Station RRVPNL Kalimori, Alwar, Rajasthan.
●Maintenance & Cable Routing of electrical workshop College
Computer Skill:
●On hand experience over MS-OFFICE (Word, Excel, Power Point)
●Inter net
●Basic AutoCAD
●ERP
Extra Co-Curricular Activities:
●Participated as an active member in various college activities & Represent College at various levels.
●“C” certificate in NCC.
Languages:
●Hindi
●English
Personal Details:
●FULL NAME : HIMANSHU SHARMA
●SEX : Male
●DATE OF BIRTH : 1st June, 1986
●FATHERS NAME : TARACHAND SHARMA
●NATIONALITY : Indian
●MARITAL STATUS : married
●PASSPORT No. : H5473666
●ADDRESS : Anand Nagar Colony, Khairthal, Alwar (Rajasthan)