SHAIK MOHD. JAFFAR MOHIUDDIN PASHA

Mobile No.009***********

E-Mail: adb0nw@r.postjobfree.com

Skype User Name: jaffarmohiuddin2005

Sr. Mechanical Engineer 16 years of gulf experienced in Supervision, Design review and delivering solutions for major construction projects.

QUALIFICATION:

1990 - Bachelor of Engineering Mechanical,

Osmania University, India. Degree attested by Govt. of U.A.E, K.S.A.

MA Engineers Construction & Development Company.

Hyderabad, India, Senior Mechanical Project Engineer; Mar 2018 to till date.

Responsibilities:

Oversee technical aspects for mechanical works in all projects including HVAC, Plumbing, Drainage, Fire protection & Fire Fighting systems.

Reviewing submitted shop drawings and material submittals against the drawings and specifications, local codes and statutory requirements and best practice.

Review project designs for technical & safety issues, and recommend solutions.

Regularly visit work sites to review work progress and guide engineers & foremen to provide a high quality output within deadlines.

Provide technical input for Material Requisitions.

Checking and ensuring co-ordination between discipline-related services works and all other disciplines.

Report project progress, quality, technical conformance, safety and other issues to all concerned.

Attending technical and progress meetings with the client and consultants.

Maintaining open communication with the client and consultant engineers on project related issues.

Maintain a strong follow-up on work approvals, project invoicing & payment certifications.

Facilitate seamless coordination and ensure successful project hand-over.

ARCADIS (Design & Consultancy).

Jeddah, K.S.A & Doha, Qatar; Senior Mechanical Engineer; Mar 2016 to Feb 2018.

Project: Security Forces Medical Center (SFMC) Riyadh, K.S.A, HMC Project Doha, Qatar.

Client: Ministry of Interior, K.S.A; Project cost SR 7bn

Responsibilities:

Design review of mechanical drawings & mechanical calculations for the healthcare project.

Review and coordination of mechanical drawings for the acceptance of main contractor and the client representative’s final approval.

Review and coordination with main contractor for the Schematic Design drawings, reports, Design Development drawings and Construction Drawings.

Attending meetings with the client representative for design clarifications.

Coordination with design team for the rectification or changes required in the drawings submitted to contractor/ client representative at the SD, DD and CD stages.

Design review in accordance to the International Codes and Standards such as ANSI, ASHRAE, SMACNA, NFPA, ASPE, UPC, NPC; IBC, UBC; ASTM, ASME, BS, NEMA, AGA; OSHA standards and AIA standards.

NFPA 99 Standard for Healthcare Facilities

ASHRAE 90.1-2007 Energy Standard for Buildings.

ASHRAE 170-2008 Ventilation of Healthcare Facilities.

ASHRAE 62.1-2007 Ventilation for Acceptable Indoor Air Quality.

Dar Al Riyadh Eng. & Architecture Consultants, Riyadh K.S.A.

Lead Mechanical Engineer; Aug 2009 to Feb 2016

ITCC Project: 5B+20 Storeys 4 Towers; 2B+5 Storey 6 Buildings

Client: Rayadah Investment Company; Project cost SR 2.6bn

Responsibilities:

Review and approval of shop drawings, materials to ensure that they are in accordance with the design and specifications.

Supervise the works of relevant mechanical HVAC, Plumbing, Fire Fighting and Utilities to ensure quality of the constructions/installations and are in accordance with approved shop drawings, specifications and local regulations.

Inspect deliveries/installed/constructed MEP work to ensure that it is in accordance with the shop drawings and the project specifications.

Put into place quality assurance procedures to ensure that procedures for review and inspection of installations are maintained throughout the project period.

Coordinate with the head of department/design staff and obtain their comments prior to action for the design mistakes/issues.

Review method statements to ensure that the contractor proposal is feasible and will achieve the intended purpose.

Monitor contractor's submittals to local authorities and ensure that they are carried out in a timely manner in accordance with the contract document.

Attend weekly meetings with the construction team for progress of work and to resolve issues where they arise.

Witness testing, balancing, commissioning and performance of air, chilled water and all other mechanical system in ETS room, Fire Fighting, potable water, Grey water.

Supervising the BMS and FMS ongoing works at site.

Final checking of snag list for outstanding minor work where required.

Conducts site visits to advise Contractor/Project Managers for any field issues and to attend any co-ordination meetings required.

Review and approve of 'As Built' drawings and ‘O&M’ Manual submittals.

Coordinate with the contractor to arrange training of the owner’s/client’s technical staff on the operation and maintenance of all MEP equipment installed.

TATWEER Dubai Health Care City (DHCC), Dubai U.A.E.

Assistant Manager-Facilities; Nov 2007 – Mar 2009

Responsibilities:

Excellent capacity in reading and interpreting MEP / HVAC, Plumbing, Drainage, Fire Fighting and Medical gas services drawings for various DHCC projects.

Review of drawings and providing approvals as per international standards and according to local authorities rules and regulations for the installation of works for the healthcare facilities.

Supervisation of site installation works as per approved shop drawings.

Witnessing testing and commissioning of HVAC and medical gases facility.

Fallow up with client and contractor to complete the installation works on due time.

Giving guidance to the clients and fit out contractors for the submittal approvals from the local authorities DEWA, Civil Defense, Dubai Muncipality & TECOM etc.

Contributes towards developing healthcare facility regulations and standards and the preparation of project specifications in accordance with international health care design standards.

Dialogue and work constructively with designers, physicians, managers and contractors.

National Eng. Bureau (Architect & Eng. Consultants), Dubai.

Senior Mechanical Site Engineer; Jan 2006 – Oct 2007

Jumeirah Lake Towers, Cluster X, 3B+45 Storey 3 Towers

Client: Ms. Al Nahda Real Estate, Project cost Dhs 470M

Responsibilities:

Attending MEP progress meeting with project managers and contractors.

Study design drawings, specifications, B.O.Q and review shop drawings, technical material submittals in compliance with specifications/authority’s regulations.

Review and approval HVAC heat load calculations, piping/duct layout, ESP calculation for FCU’s, AHU’s and ventilation fans, pump head calculations.

Site supervision of HVAC works (ducting, chilled water piping, AC machine and pumps installations), Water supply, Drainage and Fire Fighting works.

Monitor inspections of site installation work and material delivered at site.

Issuing site memos, NCR for noncompliance of site work as per design and shop drawings.

Review and approval of BMS systems.

Coordinating with civil defense local authority for the approval of fire-fighting and ventilation drawings.

Witnessing of testing and commissioning of MEP works

Basic knowledge of electrical design for building services.

SEIDCO Gen. Contracting Co. Dubai, U.A.E.

Mechanical Site Engineer; Jan 2002 – Jan 2006

Ministry of Foreign Affairs Building – B+G+3 storey building;

Client: MOFA, Project cost Dhs 150M

Palm Jumeirah – Shoreline Apartments Project, 2B+ G+12 storey- 6 towers; Client: Nakheel, Project cost Dhs 300M

D.M.C.C Jewellery workshop and staff accommodation, G+12 storey- 3 towers; Client: Nakheel, Project cost Dhs 185M

Responsibilities:

Follow up with MEP contractor in preparing material and drawing submittals.

Coordination with all engineering disciplines for MEP services.

Coordination with MEP sub contractor for site activities and monitor work progress as per daily work program for proper sequencing of work and to avoid delays.

Follow up with MEP sub contractor for material / equipment procurement and delivery at site.

Follow up with consultant for approvals of material and field inspection request.

Superior Tech. Contracting (Division of Central Air Conditioning). Hyderabad, India; HVAC Engineer, Feb 1994 – Dec 2001

Responsibilities:

Survey of buildings for the estimation of heat load calculation and A/C Plant layout. Design building mechanical systems (primarily HVAC) including estimation of cooling loads, ducting design, and ventilation system.

Selection of machines like FCU’S, AHU’S, Package units, Chillers.

Design HVAC services for commercial and residential complexes.

Prepare shop drawings / concept drawings.

Erection and supervising of air conditioning projects of various capacities for residential /commercial buildings.

Prepare material submittals and expedite the same.

Check material and equipment against contract specifications and approvals.

Site coordination of HVAC services with other services, false ceiling levels, finishes etc.

Execution and supervision of site installation including procurement of materials as per schedule, specification and progress of works.

Testing and commissioning of mechanical works at site.

Contact this candidate