maintenance mechanic

Emil Benally, Jr.

P.O. Box ***

Page, Arizona ***40 928-***-****

SUMMARY OF SKILLS AND QUALIFICATIONS:

Experience as Millwright and Maintenance Mechanic on numerous industrial overhauls

Four years Machinist experience

Certificate in Auto Mechanics covering all phases of engine repair, transmission and systems EXPERIENCE:

05/21/18 to 08/10/18: Industrial Contract Service, PO Box 13158, Grand Forks, ND 58208 Supervisor: Tim Hegg, 701-***-****. Jobsite: Crookston, MN, sugar plant overhaul. Millwright: Disassemble machinery to check for wear, check gears, bearings, and shafts. Assemble equipment such as shafts, bearings, conveyor belts, and rollers. Move equipment and machinery using hoists, rollers, and use hand tools and power tools. 11/14/17 to 12/29/17: Sundt Construction, Inc., 2620 S. 55th St., Tempe, AZ 85282 Supervisor: Ray, 480-***-****. Jobsite: Superior, AZ, Revolution Copper Mine. Millwright: Assemble winch, install brake, rotor, and motor cables for four underground elevators. New construction of machinery for underground mine. 05/22/17 to 08/11/17: Industrial Contract Service, PO Box 13158, Grand Forks, ND 58208 Supervisor: Tim Hegg, 701-***-****.

Millwright: Disassemble and assemble equipment. Install equipment such as shafts, bearings and conveyor belts. Move equipment and machinery using hoist dollies, rollers and lift trucks, use hand tools and power tools.

05/09/16 to 08/13/16: Industrial Contract Service, PO Box 13158, Grand Forks, ND 58208 Supervisor: Tim Hegg, 701-***-****.

Millwright: Disassemble and assemble parts, inspect and install specified new or reconditioned parts, repair or replace defective machinery.

10/30/15 to 11/17/15: American Manpower Services, Inc., 3137 Bellbrook Center Drive, Memphis, TN 38116. Supervisor: Jere Little, 866-***-****.

Millwright: Work in food processor, level and align conveyors, belts and rollers. 06/14 to 08/14: Industrial Contract Service, 2500 Mill Road, Grand Forks, ND 58203. Supervisor: Tim Hegg, 701-***-****. Jobsite: Sugar manufacturing plant, Crookston, MN. Millwright: Some welding, disassemble and assemble equipment, replace defective parts, inspect bearings, mechanical seals and oil seals. Make required adjustments to complete units. 04/14 to 05/14: XCEL Erectors, Inc., Comanche Power Plant, Pueblo, CO. Supervisor: Kenneth Nez, 719-***-****

Carpenter: Work on cooling tower, demolition on top deck and replace with fiberglass floors. Use power tools and hand tools.

01/14 to 02/14: Zachry Construction, Navajo Generating Station, Page, AZ. 800-***-****. Supervisor: Victor Begay, 928-***-****

Maintenance Mechanic: Work in pulverizer, repair and replace, install, adjust, modify, and service all types of mechanical equipment. Handle multiple tasks of minor and complex nature. Emil Benally, Jr. Page 2

06/13 to 08/13: Industrial Contract Service, 2500 Mill Road, Grand Forks, ND 58203. Supervisor: Tim Hegg, 701-***-****

Millwright: Replace defective parts, seals and bearings on conveyor belts and machines. Adjust clearances to specification.

02/13 to 03/13: Zachry Construction, Navajo Generating Station, Page, AZ. 800-***-****. Supervisor: Victor Begay, 928-***-****

Maintenance Mechanic: Work in bowl mill, repair and replace old parts, install, make adjustments, do modifications and service all types of mechanical equipment. Handle multiple tasks of minor and complex nature.

03/12 to 03/12: Zachry Construction, Corondo Power Plant, St Johns, AZ, 928-***-****. Millwright: Work in crusher and bowl mill, replace bearings and gaskets, and make adjustments to specifications.

02/12 to 02/12: Zachry Construction, Navajo Generating Station, Page, AZ. 800-***-****. Supervisor: Victor Begay, 928-***-****

Maintenance Mechanic: Position repair installations, adjust and modify, and service all types of mechanical equipment. Handle multiple task of minor and complex nature. 10/11 to 11/11: Zachry Construction, U.S. Silica, 701 Boyce Memorial Dr., Ottawa, IL 61350. Supervisor: Emerson Adam, 361-***-**** or 800-***-****. Millwright: Install and modify equipment, do rigging and perform general labor at Sand Plant. 02/11 to 03/11: Zachry Construction, Navajo Generating Station, Page, AZ. 800-***-****. Supervisor: Victor Begay, 928-***-****

Maintenance Mechanic: Assemble, set up, adjust, lubricate, maintain and repair all types of construction equipment. Install machinery and equipment according to layout plans. 09/10 to 10/10: Red Rock Plumbing, PO Box 2001, Page, AZ 86040. Supervisor: Dowell Finsterwald, 928-***-****

Labor Helper: Use jack hammer and hand tools to dig trenches, do fire watch. 01/10 to 03/10: Zachry Construction, Navajo Generating Station, Page, AZ. 800-***-****. Supervisor: Victor Begay, 928-***-****.

Maintenance Mechanic: Disassemble coal feeder, clean and inspect for wear. Inspect inlet gate for leaks, upper and lower gaskets. Assemble with new bearings and seals, grease and adjust to required specifications.

01/08 to 01/09: ARAMARK, Inc., PO Box 1597, Page, AZ 86040. Lake Powell Resorts & Marinas. Supervisor: Shawn Watson, 928-***-****

Carpentry: Houseboat carpentry and maintenance. Build new furniture, repair broken chairs, tables, counter tops, install trimming, build window frames, and build and install cabinets. 01/07 to 02/07: Zachry Construction, Navajo Generating Station, Page, AZ. 800-***-****. Supervisor: Kirk Benally, 928-***-****.

Maintenance Mechanic: Perform maintenance on Bowl Mill. Replace damper screen, floors, clean mechanical unit and inspect for wear. Install rollers, doors, make adjustments to specifications. Set motors and couplings.

Emil Benally, Jr. Page 3

10/06 to 01/07: S & B Engineering and Constructor, 7825 Park Place Blvd., Houston, TX 77087, 713-***-****

Millwright: Preventive maintenance on new machinery. Set, level and center line on equipment. Do field labor.

04/06 to 06/06: ASARCO, Inc, Ray Complex, Hayden, AZ, Niki, 800-***-**** Maintenance Mechanic: Repair, maintenance and inspection of mechanical processes and support equipment at Hayden Concentrator. Equipment included rod and ball mills, crushers, conveyors, pumps, chutes, hoppers, scrubbers, lubrication systems, vibrating screens and hydraulics. 12/05 to 01/06: Contractor Employment Service, 5501 N. Swan Rd., Tucson, AZ 85718. Supervisor: Butch Bates, 928-***-****

Millwright: Check vibration on steam turbine. Inspect boilermaker for wear and leak on nitrogen plant. Replace pump and motor on copper mine.

11/05 to 11/05: Red Hawk Plant, 11600 S 363 Ave., Arlington, AZ 85322. Supervisor: Kelly Hartley, 520-***-****

Millwright: Check alignment, clear rotor turbine bearing for wear. Check clearance on oil shield and clean. Bolt-up and tighten expansion bolt, sleeve to specifications on coupling. 09/05 TO 09/05: Superior Machine Co., 692 N. Cashua Dr., Box 5419, Florence, SC 29502 843-***-**** or 843-***-****. Supervisor Dennis Freeman. Rocky Mountain Steel Mill. Millwright: Demolition caster in steel mill. Basic labor, rebuild, modify, rig and bolt-up I-beam and roller.

04/05 to 05/05: Buchanan Contracting, Inc., 120 Black Eagle Rd., Great Falls, MT, 59404. 701-***-****

Millwright: Modify, bolt-up and install mechanical equipment in new malting plant. Rig, hoist and operate remote crane. Adjust machinery according to blueprint specs. 01/05 to 03/05: Zachry Construction, Navajo Generating Station, Page, AZ. 800-***-****. 10/04 to 11/04: Zachry Construction, Coronado Power Plant, St. Johns, AZ. 800-***-****. 02/04 to 03/04: Zachry Construction, Navajo Generating Station, Page, AZ 08/02 to 05/03: Zachry Construction, Arlington, AZ. Millwright/Maintenance Mechanic: Work in bowl mill, replace expansion joint, install new gasket and align. Disassemble trickler valve for inspection, replace bushing and seal. Inspect, clean and test lube spray and trusion pan. Disassemble coal valve for inspection and replace bushing. Reassemble pyrite hopper and expansion joint.

10/00 to 02/01: Summa Mechanical Contractor, Phoenix, AZ. Millwright: Layout of machinery, installed anchor bolts and motor bolts, rigged, hoisted, leveled, and aligned machinery, used hand and power tools, set-up oxygen and acetylene for cutting- torch operators.

Contact this candidate