Innocent Owuzo

Contact: +240*********, +234**********

adawut@r.postjobfree.com

Date of Birth 22 June, 1972

Country: Nigeria

Sex: Male

Marital Status: Married

Present Location: Equatorial Guinea

CAREER OBJECTIVE

I am an experienced LEEA Appointed person, rigging supervisor and LEEA approved crane/lifting supervisor, LEEA

approved lifting inspection engineer with more than 13 years experience both onshore and offshore.

My objective is to ensure that I effectively and efficiently use my skills to achieving company’s organizational goals, in addition, I offer outstanding organizational skills, which have proven to be a critical asset in developing, maintaining, and playing significant roles in inspection, lift planning, rigging supervision and lifting operations in ensuring that short cuts and unplanned lifts are avoided there by reducing risks associated with lifting operations, these qualities combined with my dedication and tireless ethic, should enable me to make positive impact.

ACEDEMIC AND EDUCATIONAL QUALIFICATIONS

Bachelor Degree in Engineering (B.Eng Mechanical Engineering)

(Federal University of Agriculture Makurdi-Nigeria)

Senior Secondary School Certificate of Examination (SSCE)

(St Charles’ College Abavo-Nigeria)

First School Leaving Certificate.

(Ekuma Primary School, Abavo-Nigeria)

PROFESSIONAL QUALIFICATIONS

LEEA Appointed Person For Lifting Operation

LEEA Approved Lifting/Crane Supervisor

Approved and certified Rigging Supervisor

Diploma in Lifting Equipment General- LEEA part 11

Entry examination-LEEA part 1

OPITO APPROVED BOSIET

Certificate of Examination in Magnetic Particle Inspection Level 11 (SNT-TC-1A)

Certificate of Examination in Dye Penetrant Inspection Level 11-(SNT-TC-1A)

Certificate of Competence (Testing And Examination of Cranes, Ropes, Chains, And

Testing of Other Lifting Machines) - FACTORIES ACT Of the Federal Ministry Of

Labour and Productivity –Nigeria.

Certificate of competence Lifting Equipment Controls and Operations Procedures

Rule)-LECOP (NSL)-online training course.

Certificate of competence Rigging and Lifting (NSL)-online training course.

WORK EXPERIENCE

CERTEX AFRICA GROUP

LOCATION: EQUATORIAL GUINEA

POSITION: APPOINTED PERSON,LIFTING AND RIGGING SUPERVISOR

PERIOD: 2015 TO DATE

JOB RESPONSIBILITIES

Responsible for the categorization of lift according to the associated hazards

Calculation of weight of load to be lifted and the ground bearing pressure

Selecting the appropriate crane and set up for the job

Calculating Safe Working Load of the lifting accessories to be used for the lifting operation.

Selecting Lifting Equipment and Lifting accessories to be used for the operation and ensure that they have valid inspection reports with the correct colour code

Responsible for creating the necessary permit to work

Generating JHA and Risk assessments with regards to a specific job and discussing it with the lifting crew during the tools box meeting before starting the activities and how to carry the job in safe manner

Explaining the work method statement and the safe system of work to the lifting crew and ensure that they fully understand it before the start of the job.

Developing work method statements and safe systems of work for any specific lifting or rigging operation.

Supervising, Directing and coordinating activities of workers engaged in all rigging and lifting activities, to ensure total compliance with safety procedures and method statements

Ensuring that the lifting plan or rigging plan is performed according to the work method statement in a safe manner

Supporting the development of Lift Plans including collation of necessary Lift Plan documentations

Planning, supervising rigging/lifting operation safely in accordance to LOLER Regulation 8 and BS7121

Performs pre use and in-service equipment inspection check of the rigging equipment to ensure that they are in good condition and safe for use.

Coordinate with the authorized third party personnel for the inspection of the Rigging accessories.

Documentation of records such as third party inspection reports of rigging equipment and operator’s competency certificates.

Review the training competence certificates of the lifting crew

Implementation of Preventive Maintenance Schedule for all lifting equipment.

Perform conditional check and fitness for purpose on lifting appliances and evaluate their utilization on site in co-ordination with third party

Actively involved in the promotion of excellence in EH&S by setting out clear expectations for site

Sets clear expectations for individuals and teams, communicate organisation, roles and responsibilities, and provide ongoing coaching/mentoring and skill development support.

CERTEX LIFTING PRODUCTS AND SERVICES

LOCATION: EQUATORIAL GUINEA/UGANDA

MAY 2014 – AUGUST 2015

POSITION: SENIOR LIFTING AND INSPECTION ENGINEER

JOB RESPONSIBILITIES

Inspection, load testing and Certification of all types of cranes such as mobile cranes, offshore pedestal cranes, tower cranes, overhead cranes etc in accordance to the relevant standards and the applicable international regulations.

Inspection, load testing and certification of forklifts and Reach Stackers

Inspection and Certification of Mobile Work Elevated platforms cherry pickers such as Man lifts and Scissors lifts

Inspection of Chain hoists, lever hoists, Tirfor Machines etc.

Magnetic particle inspection on welded padeyes and joints

Visual examination, NDT and Load testing of all types of lifting Equipment.

Dye penetrant inspection.

Inspection and certification of all types of lifting loose gear.

Load testing of ROV A frames and winches

Responsible for the six monthly inspection and change of colour code of all Trident Energy (Bome, Okume, FPSO Sendje Ceiba) and Noble Energy (Alen, Luba & Malabo) Lifting Equipment, MEGI ALEN platform, Luba and Malabo Lifting Equipment, Marathon Plant.

Generating Lifting inspection procedures and reviewing the existing ones to ensure that they meet the current international applicable standards

Updating and maintaining lifting equipment database/register.

Ensure total compliance to established procedures that are in place for maintaining the integrity of lifting equipment i.e. statutory / periodic inspection regimes and maintenance

Declaring the non-conformance and compiling the defect notice to the client/contractors reference to the company procedure.

INSPECTION AND TESTS NIGERIA LIMITED

PORT HARCOURT

AUGUST 2011-MARCH 2014

POSITION: SENIOR LIFTING SUPERVISOR

JOB DESCRIPTION

Inspection, load testing and Certification of all types of cranes such as mobile cranes, offshore pedestal cranes, tower cranes, overhead cranes etc in accordance to the relevant standards and the applicable international regulations.

Inspection, load testing and certification of forklifts and Reach Stackers

Inspection and Certification of Mobile Work Elevated platforms cherry pickers such as Man lifts and Scissors lifts

Inspection of Chain hoists, lever hoists, Tirfor Machines etc.

Magnetic particle inspection on welded padeyes and joints

Visual, NDT and Load Testing) of all types of lifting Equipment.

Dye penetrant inspection.

Inspection and certification of all types of lifting gear.

Load testing of ROV A frames and winches

Carry out 6 monthly inspection and change of colour code of all Lifting Equipment onshore and offshore.

Generating Lifting inspection procedures and reviewing the existing ones to ensure that they meet the current international applicable standards

Updating and maintaining lifting equipment database/register.

Ensure total compliance to established procedures that are in place for maintaining the integrity of lifting equipment i.e. statutory / periodic inspection regimes and maintenance

Declaring the non-conformance and compiling the defect notice to the client/contractors reference to the company procedure.

Develop lifting inspection procedures.

Develop Job Hazard Analysis and the risk assessment prior to the commencement of any job.

Developing job plans for the lifting equipment that will be required in lifting equipment projects and integrated maintenance planning process.

Identifying, updating and maintaining existing work procedures and technical standards codes of practices and specifications.

Responsible for making sure that work is completed on the site, to ensure compliance with company procedures and to create performance matrix.

Maintain adequate communication & technical interface-links with relevant disciplines and projects.

Coordinate & implement statutory requirement of scheduled Inspections, testing & certification of all cranes and lifting devices.

Co-coordinating and implementing statutory inspection & certification required to be carried out every six months by LEEA certified lifting Inspectors of local regulatory authority-approved Contractors engaged by Company under call off contracts managed by Asset Integrity team.

.

Participates in technical studies, anomalies reviews, and assessments,

Actively involved in technical audits and making recommendations to close out observations and anomalies.

Discuss with client on corrective actions on how to close out anomalies. and make recommendations

Provide Leadership, mentoring and guidance to the workforce personnel.

Responsible for managing all associated workers & lifting gear and its maintenance.

Total E&P NIGERIA LIMITED

ONNE-PORT HARCOURT

3 JANUARY 2011- 7 AUGUST 2011

POSITION: QAQC LIFTING INSPECTOR

JOB DESCRIPTION

Monitor and supervise all lifting operations including heavy lifts operations at the

TOTAL Quayside.

Promote safe handling and lifting operation referring to TOTAL HSE policy and international standard.

Perform conditional check and fitness for purpose on lifting appliances and evaluate their utilization on site in co-ordination with inspection departments.

Perform compliance checks on all third party contractors’ equipment before they are loaded to TOTAL offshore locations.

Implementing and enforcing TOTAL company rules and procedures at the quayside.

Providing logistics and technical support to personnel at the Onne quayside.

Follow–up the inspections performed by the approved third-party certifying companies, follow-up their jobs and facilitates their activities to meet up loading onto the vessels.

Supervise all lifting operations at the Onne quayside in conformity to company’s policies and procedures.

Ensuring strict compliance of the six monthly colour coding campaign.

Work and supervise all cargo operations in compliance with UKOOA (Guidelines for the Safe Packaging and handling) of cargoes to and from offshore locations.

Documentation of all third party’s inspection reports.

Ensuring that all dangerous goods are loaded and offloaded along with proper documentations.

Ensuring that all explosive cargoes and radioactive sources are in compliance with the directives of the Nigerian Nuclear Regulatory Authority (NNRA).

Issue a weekly report including all the highlights of the week anomalies and no conformance reports.

AMOSCO NIGERIA LIMITED

PORT HARCOURT

POSITION: LIFTING EQUIPMENT INSPECTOR

2006-2011

JOB DESCRIPTION

Inspection, load testing and Certification of all types of cranes such as mobile cranes, offshore pedestal cranes, tower cranes, overhead cranes etc in accordance to the relevant standards and the applicable international regulations.

Inspection, load testing and certification of forklifts and Reach Stackers

Inspection and Certification of Mobile Work Elevated platforms cherry pickers such as Man lifts and Scissors lifts

Inspection of Chain hoists, lever hoists, Tirfor Machines etc.

Magnetic particle inspection on welded padeyes and joints

Visual, NDT and Load Testing) of all types of lifting Equipment.

Dye penetrant inspection.

Inspection and certification of all types of lifting loose gear.

Load testing of ROV A frames and winches

Carry out 6 monthly inspection and change of colour code of all Lifting Equipment onshore and offshore.

Generating Lifting inspection procedures and reviewing the existing ones to ensure that they meet the current international applicable standards

Updating and maintaining lifting equipment database/register.

Ensure total compliance to established procedures that are in place for maintaining the integrity of lifting equipment i.e. statutory / periodic inspection regimes and maintenance

Declaring the non-conformance and compiling the defect notice to the client/contractors reference to the company procedure.

ABILITY AND SKILL

Good written and oral skills in English

Good personal, supervisory, written and presentational skills

Good interpersonal skill and ability to work as a leader

Good and sound knowledge of the relevant engineering and construction codes and standards.

Ability to work within a diverse cultural environment.

Ability to work under pressure to meet up target without supervision.

Demonstrated interpersonal / team building skills.

Ability to communicate effectively and work under minimum supervision.

Working knowledge of all relevant regulations, procedures and instructions.

COMPUTER PROFICIENCY

Microsoft word

Microsoft Excel

Internet Explorer-

REFEREES

Available on request.

Contact this candidate