E&I QC INSPECTOR

K.P.PRADEESH

E-mail : ***********@*****.***

Skype ID : pradeesh.kp3 Mob : INDIA : +91-959*******

WhatsApp no : +91-959*******

OBJECTIVE

To obtain a challenging position with a leading organization that would facilitate transformation of my ability, experience, and skills to create value for the company, customer, and myself.

EDUCATIONAL QUALIFICATION

Diploma in Electrical & Electronics Engineering from Sree Krishna polytechnic College, Nagercoil.

HSC from Govt.Hr.Sec.School, Thuckalay.

S.S.L.C from Govt.Hr.Sec.School, Thuckalay.

EXPERIENCE SUMMARY

Functional Experience

I

Organization : HEAVY ENGINEERING INDUSTRIES & SHIP BUILDING CO (Kuwait)

Designation : ELECTRICAL & INSTRUMENTATION -QA & QC

Duration : From 21-12-2016 to TILL

a)Client : FDH (JV)

End User : KIPIC / KNPC

Project : New Refinery Project – AL Zour

b)Client : M/s. PETROFAC

End User : M/s. KUWAIT OIL COMPANY (KOC)

Project : CRUDE GATHERING CENTRE NO: 29, 30 & 31

Responsibilities:

Preparation and Implementation of Project Quality Plan for the Electrical & instrument activities as per Project specified Procedures.

Preparation for RAM (Request for Material Approval), ITP, ITR, Procedure, Method statement.

Client / Inter Office Inward and outward Documentation preservation.

Maintaining Updated Drawings, Technical Transmittal, and Quality Documents as per Quality Management System.

Maintaining Project Components Consumes data by discipline wise.

Responsibility to prepare and raise the RFI (Request for Inspection) along with ITR, Drawings and related typical documents for electrical & instrument activities.

Ware house / Lay down material inspection and maintained the register as BOM/ BOQ.

Maintaining Register Punch list, Nonconformance and Surveillance / Observation Reports for activities which are against approved ITP, ITR / FQP.

Register documents for Vendor / supply manpower and construction Contractors.

Ensure Test Certificate (FAT) for inwards materials and keep updating / track with calibration certificate for testing equipment’s.

Preparation and Submission for Final Dossier for Project Package / Sub-system wise.

II

Organization : ALDAR International Co (Badra- IRAQ)

Designation : ELECTRICAL & INSTRUMENTATION -QA & QC

Duration : From 28-02-2016 to 06-10-2016

Client : M/s. SAMSUNG ENGINNERING COMPANY LTD

End User : M/s. GAZPROM (NEFT)

Project : 5 X 25 MW GAS POWER PLANT - CPF PHASE-2 BADRA OIL FIELD

Responsibilities:

Implementation of Project Quality Plan for the Electrical & instrument activities as per Project specified Procedures.

Responsibility to prepare and raise the RFI (Request for Inspection) along with ITR, Drawings and related typical documents for electrical & instrument activities.

Pre inspection with client and Final Inspection with End user.

Ware house / Lay down material inspection as per ITP & BOM.

Generate Punch list, Nonconformance and Surveillance Reports for activities which are against approved ITP, ITR / FQP.

Monitor activities of supervision contractor and construction Contractors.

Ensure Test Certificate (FAT) for inwards materials and keep updating / track with calibration certificate for testing equipment’s.

Submission of Inspected materials quantity to client.

Hand over documents with dossier preparation for all tested equipment’s in stage wise for pre-commissioning team.

Accomplishments

Inspected Transformer (55 MVA, 35 MVA, 2.5 MVA & 1.5 MVA) Erection, Assembly, Oil filtration with BDV, IR, Winding Resistance and other test as per ITP / FAT.

Inspected Bus Duct for 33 KV, 11 KV, 400 V systems from MV& LV Panels to Transformer (Visual, Torqueing, Continuity, IR & Hi-Pot).

Inspected various rating Motor’s ( Visual, Installation, Glanding Termination, IR Winding Resistance & Solo Run Test)

Inspected Earthing (ICE, ISE, ESE) (Exothermic cad welding) cable and Bus bar system for Panels, JB, Buildings, Structures, LA, Instrument Equipment’s, Cable trays & Lightings. Performed Earth resistance value for Grounding system.

Inspected Cable Trays & Conduit for Electrical (ladder type), Instrument (Perforated Tray), JB, Valve, Fire alarm & Telecom circuit.

Bench Calibration for Pressure Transmitters, Differential Pressure Transmitters, Temperature Transmitters, Flow Transmitters, level Transmitters, Flammable and toxic gas detector..

On site Calibration for Control Valve, ON/OFF Valve (Ball type, Butterfly type & Globe Valve).

Installation, Testing of Instrument JB, Pressure Transmitter, Level Flow, Temperature Transmitters, Air manifold, Air tubing, Instrument stagnant, fire alarms, smoke detectors & CCTV cameras.

Cable Inspection for IS, Non IS, MV, LV control cables (Visual, laying, Dressing, Continuity, IR & HI-Pot) at various stages.

Inspected Cable trench (Direct buried & Concrete) for MV, LV, Control, IS & Non IS cable’s

Inspected Electrical Panels (GIS, MV, LV, VFD, NER, Capacitor, Lighting DB’s) Visual Inspection, Installation, Bus Bar Torque, IR, HV test, (CT, VT, CB testing).

Inspected Instrument panels (PDB Cabinet, Marshalling cabinet, System cabinet, Network cabinet & JB) Visual Inspection, Installation, Glanding, Termination, Earthing &

Loop checking for Transmitters, Valve, Thermo couple, Pressure switch, Flow switches, Hand switch’s, Vibration monitor and other feedbacks.

Inspected Battery Charger ( Float & Boost mode) & Battery Installation testing and Battery Charging & Dis Charging

Cable Glanding &Termination inspected for the cable size range from 0.5 to 600 Sq. mm

Indoor and outdoor Lighting system for Substation, SCC, CCR and over all plant.

III

Organization : TATA Projects LTD (QS division),

Designation : Asst Manager (E & I -QA & QS)

Duration : From 25-01-2012 to 09-02-2016

TATA Projects ltd:

TATA Projects ltd is the leading Engineering, Procurement and Construction Company in India, one of the fastest growing and most admired infrastructure companies in India. It has expertise in executing large and complex Industrial Infrastructure Projects to various clients in India & Overseas from various industrial sectors

Responsibilities:

Factory Material inspection for various commodity like Transformers (75 MVA, 2.5 MVA, 350KVA), Cables ( MV, LV, Control, Communication), Bus duct( 33 KV & 11 KV), Battery (VRLA & Ni- cad) & Battery charger s per QAP / ITP .

Factory Inspection for Materials like Pressure transmitters & Diff Pressure transmitters (ABB Make), Thermo couple, Smoke analyzer, PA GA system, JB for various Power plant, Oil & Gas projects.

Factory Inspection for Panels (MV, LV, VSD, NGR, PDB, Sever panels as per client approve ITP / QAP.

Field Quality Team lead for 400 KV D/C Twin bundle Moose conductor-Transmission line project from Khargpur to Chaibasa Sub Station (Line length approx. 240 KM), Additional responsible of Administration, Accounts, Technical Support, Report Generation & Planning.

Field Quality Team lead for Project Electrical Commissioning for Electrical section- 32 MW Solar Project- Bharamathi-Karnataka.

Field Quality Team leader for Field Quality for Electrical section- 132/ 33 KV Substation for 126 MW Wind Power Project- Prataphgarh – Rajasthan.

Final Electrical Field Quality for Coal Handling Plant of 5000 ton/day in Adani Murmagoa Port trust- Goa.

Field Quality Team leader for Field Quality for Electrical section- 20 MW & 55 MW Solar Project- Maharashtra.

Team leader for Field Quality & project co-ordination for 400KV D/C Quad Bundle Moose Conductor Transmission line project in Himachal Pradesh, Madhya Pradesh, Kolkata for various clients.

Accomplishments:

Implementing work in accordance to Quality Inspection with the basis of project procedure, QA/QC procedure, MS ( Method Statement ) and ITP ( Inspection Test Plan).

Responsible for the Execution, Implementation and review of Inspection and test data and preparation of red mark-up of drawing and documentation work's and Monitoring of construction activities as per applicable codes and standard project technical specification.

Performs daily surveillance on all Electrical related works on site and implements quality system and procedures as stated on Standard with emphasis given on prevention and early detection of work non-conformities

Responsible of quality inspection of Electrical & Instrumentation activities as per standards and specifications.

Insure that Quality Controls is carried out during the installation phase, this shall include but not limited to the following items, Power Transformer (50MVA, 100MVA, 1.5MVA, 350KVA)Installation & testing, CT, PT, Insulator, Panel Installation & testing, Bus Bar, Cables and cable glanding, Cable trays, Impulse Tubing and fittings, Fields Instrument ( Transmitter, Motor Operating, Controls valves etc.

Monitoring and Witness of different kind of Instrument Testing such as Insulation test, Continuity Test, Grounding Resistance Test, and calibration of Instrument and preparation of drawing and document required for construction activities and Prepare weekly status report.

Supervised Punch List closed by field construction prior for client closed acceptance.

Preparation of Pre and Post Inspection Documents, review of loop packages for its compliance and obtaining approval of them from the Clients / Customers.

Verify all required inspection report and test records are systematically generated and compiled to the approved QC Procedures, as per Schedule.

Daily work allocations to contractors and sub-contractors and review of work done at end of the day, preparation of punch lists and verification of compliance.

Resolution of non-conformities in consultation with Client Engineering Department.

Vendor Evaluation for various material purveyors.

Conducting periodic review meetings at site for resolving quality issues and ensuring safety.

IV

Organization : M/S SUZLON ENERGY LTD

Designation : E & I- QA / QC Engineer.

Duration : From 01-08-2005 to 20-12-2011

SUZLON:

SUZLON ENERGY LTD is Asia’s strongest growing fully integrated WIND POWER Company and ranks 3rd in the world. Suzlon integrates consultancy, design Manufacturing and Operation and maintenance services to provide customers with total wind power solution.

Responsibilities:

Field Quality of WEG Electrical systems, PLC automation systems for WEG, Power Electronic components and etc.

PLC (Bachman) Installation and Pre commissioning inspection Wind Energy Park.

Inspected NPN, PNP Sensors, Vibration Sensors, VFD, Over Speed Monitor, Slip ring communication cables, OFC, DC Relays & Thermo couple connections with PLC.

Review & Monitor of Scheduled maintenance & Preventive and breakdown maintenance activities for 110 KV/22 KV/33 KV switch yard maintenance.

Quality Surveillance of LT/HT Maintenance & Switchgears, Power Transformers & VCB & ACB operation, Installation of CT, PT,LA and HT equipments safely.

Review & Monitor of control panels, Power panel and Capacitor panels, Panels wiring activities as per Tech Spec & Documents & Drawings.

Root cause analysis of Electrical & Mechanical breakdowns.

Sending the Daily progress report for site activities to SBU south head office & corporate office through mail and SAP R/3 Production system.

Planning and Execution of initiatives towards the organization favor with the optimization of cost and manpower.

Quality & Safety Training and PPE Knowledge to workers frequently while safety work at Organization.

Implementation of LOTO for the entire site for new wind turbines

Worked as site section head for the TNPL customer.

Lead for SCADA activities to the entire site (303 WTG’s) 431 MW and parallel reporting to GMPH.

TECHNICAL TRAINING PROGRAMS

Undergone the basic Industrial safety training program.

Undergone the Control Panels training program.

Undergone the Stress & Strain, Managerial skill, Giving & receiving feedback training programs.

V

Organization : M/s NEPC INDIA LTD

Designation : Electrical Commissioning Engineer.

Department : Electrical- Project

Duration : From July 2001 to July 2005

Responsibilities:

Testing & Commissioning of NEPC make 225 KW type wind turbines.

Project activities for the turbine erection with team.

Commissioned 250 KW wtg’s pilot project in abroad (Kazakhstan & Bangladesh)

To maintain the documents of WTG commissioning reports.

Co-ordination with vendors & Team members.

Planning & sourcing (Stores) the materials to commission the WTG.

Commissioned more than 250.nos 225Kw wind turbines all over in India & Abroad.

Power panels, control panels, capacitor panel, Nacelle wiring of WTG’s in factory.

Power cable termination in panels & Turbines.

VI

Organization : Ram Engineering groups (GE ALSTOM On contract)

Designation : Junior Engineer.

Department : Electrical-Panel Assembly.

Duration : From April 1999 to June 2001

Responsibilities:

To assemble types of LV & HT panels.

Wiring types of control panels for BPCL, hydro plant, Power plants etc.

Wiring different types of module panels.

Module Cable wiring, Termination & related works.

PROFESSIONAL STRENGTH

Personal Strength

Managing vision & Purpose.

Dealing with certainty.

Functional Excellence.

Building Effective Teams.

Project Management

Monitoring Progress of the Project.

Client Coordination.

Social group Coordination.

Promptitude operation.

PERSONAL DETAILS

Father’s Name : Mr. T. Krishna Pillai

Date of Birth : 13-05-1978

Nationality : INDIAN

Passport No : JO154395

Marital status : Married

Languages Known : Tamil, English, Hindi & Malayalam

Permanent Address : 25/42, Vettikonam, Thuckalay (PO),

Kanyakumari (DT). PIN- 629175.

Tamil Nadu,

INDIA.

DECLARATION

I hereby declare that all the above statements are true, complete, and correct to the best of my knowledge, and belief.

Date:

Place: (K.P.PRADEESH)

Contact this candidate