Engineer Quality

MANU PATHROSE

ABU DHABI

Contact:+971*********; Email: ***********@*****.***

Manu pathrose

QA/QC Engineer

ABU DHABI

Dear Sir/Madam,

This is my modest request to you to consider my mail as an application for QA/QC Engineer position in your esteemed organization. Shall much appreciate a call for personal interview.

I am QA/QC Engineer with more than 6 year experience in the construction projects and production with a focus on Quality control functions. At present am working as QA/QC engineer in MTB project (Mid Field terminal Building Abu Dhabi airport), Warner Bros. World Abu Dhabi Project & Al Mariya Central Abu Dhabi project with Giffin traffiks Sign LLC. The job entailed

Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site.

Cary out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan.

Coordinate with the consultant’s representative and Site In-charge for inspection and meeting about quality problems including the closure of Non-Compliance Report.

Report to the QA/QC Manager, control, and monitor all activities related to Quality Management system, QMS.

Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and Site Instruction, SI.

Responsible for the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations.

Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.

Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP.

Liaise the Technical Engineer for submission of material submittals to Consultant.

Preparing MIR & WIR and coordinate for the inspection for the same.

Preparing method statement and ITP

Preparing Risk assessment

Monitoring the work at site wherever required.

Preparing KPI report & weekly report

Preparing IPC documents and conduct inspection for IPC

Control all fellow QC inspectors in the department

Support maintenance and implementation of the Contract Management System

Support delivery of the contract Assurance Program

Plan and partake in internal project and supplier audits

Conduct Vendor and Supplier Qualification Evaluations

Support in conducting root cause analysis of project nonconformities and technical incidents

Attend project kick off meetings to provide QA/QC input

Provide Quality support to in-country site-based engineering team

Determine inspection level and requirements of product/material

Review and approve product/material requisitions and validate QC requirements

Provide Quality input to technical bid evaluations

Review and approve necessary vendor and supplier documents including ITPs, NDE procedures and reports, Manufacturing Record Books, etc.

Support 3 rd party inspection coordination process and review inspection reports and release notes

Assist in development and approval of construction and commissioning ITPs

Review construction and commissioning workpacks prior to site issue

Review and validate QC activities to verify products/services satisfy requirements

Conduct review of project technical queries and standard deviation requests

Verify completeness of documentation for handover to the client

Support implementation of quality continuous improvement initiatives

Ensure the closure of Quality requirements for project close out

Regular quality reporting as required and ensure the satisfactory reporting, tracking and closure of project NCRs and Preventive Actions

Quality input to project lessons learned LITIES

At this stage I find myself to be groomed enough to look outward and explore the possibility of placement at a suitable professional position with higher responsibilities. A tour through my enclosed resume shall familiarize you with the details and I am confident, in my credentials, you would find a perfect fit for the said job. Thanks in advance for sparing your time.

Much appreciate a call for personal interview.

Yours sincerely

Manu Pathrose

Manu Pathrose

Contact: 056******* Email:***********@*****.*** Passport: L1479844

Driving License: UAE & INDIA

Professional Work Experience with GALVACOAT FOR GALVANIZING & LIGHTING POLES (Abu Dhabi) 2014-2016

Experienced as a QA/QC engineer in the field of manufacturing and galvanizing of lightning poles, guard rail systems and general fabrications

Able to work independently or in a team to maintain company quality policy and customer satisfaction

Strong knowledge in fabrication drawings

Meeting with Consultant, Client & Contractor for approval

Preparing ITP

Conducting FAT with clients

Preparing PQP and QAP

Receiving project drawing from QC manager and preparing check list for inspection

Inward inspection of raw material as per approved drawing and quality standards

Conducting first piece inspection of line production and approval/rejection of the same as per approved drawing

Periodically visit the sites, supervise the works performed and support QA/QC engineers & other staffs on Quality related matters.

Train & arrange meetings to educate other staffs on quality & related areas

Analyze customer complaints, customer feedback & take appropriate action as when required

Minimize the process gaps by analyzing the internal quality audit NCR, site NCR & site instruction raised during all phase of execution.

Conduct Quality Audits& see the preventive & corrective actions are taken on the audits finds.

Review technical data sheets, ITP, Purchase orders, test reports type, Sample, Routine, Special etc.. Certificates and related shop drawings

Carry out/witness inspection and testing as per plan –

Raise inspection calls for vendor inspection by clients representative & notify to external/third party authorities

Preparation review and updating of system manuals, system procedures as management decision -

In process inspection of line production and giving technical assistance for production supervisor

case of any nonconformity, generating NCR and initiating to close the NCR with the concerned department

Maintaining all records related to ISO 9001:2008

Conducting internal audits and maintain the records for ISO external audit

Coordinating the customer /third party inspections and providing relevant documents

Conducting all the in process inspection of galvanizing as per the standard BS EN ISO 1461

Conducting final inspection and approval of finished products for dispatch

Organising and conduct of inspection activities

Preparing progress report

Fabrication supervising, progress monitoring and reporting

Inspection both in-house and site

Preparing WPS and PQR for welding process

Preparing all relevant QC documents for the clients

Controlling all QC inspectors

Raising NCR and giving instruction for rectifying the defect to close the NCR

Producing Conformity Certificates for the clients

Controlling all Raw material for the production to ensure quality

Handling all QC documents

Deep Knowledge in Standards

BS EN ISO 1461

ASTM A123

ISO 14001-2004

ISO 9001-2008

API

ASTM

DIN 17100

Deep knowledge about all the materials specifications and grades.

IRCA Certified lead auditor for ISO 9001-2008

Professional Work Experience with FORBES MARSHALL PVT LTD 2012-2014

PROJECT 1 :STEAM LEAK ANALYSIS AND INSTALLATION OF STEAM TRAPS AT BPCL-KOCHI REFINARY

Forbes Marshall Pvt ltd is a leader in the area of process efficiency and energy conservation for the process industry. They were awarded the work of installation of 2000 steam traps. The contract includes associated piping related to the installation of steam traps. The duration of contract was 2 Year and myself was the QC Engineer for this project. We installed different types of traps, manifold and valves.

Skills & Job Knowledge

Fabrication and Erection and Project Control Activities

Reading Review of Fabrication drawings for Work planning

Work allocation for fabrication, monitoring and reporting)

Verifying and supervising the dimension during fabrication

Preparing material list

Coordinating and planning the fabrication

Coordinating and planning the piping

Coordinating and planning the erection

Handling the workers and allocating work

Inspection and Quality Control Activities

Welding inspection and preparing report

Conducting Die Penitent test

Conducting oil chalk test Dye penetrant Test

Conducting pneumatic test

Checking surface preparation and DFT during painting

Maintaining the discipline within the group of laborers

Handling miscellaneous issues regarding mechanical and civil at the time of work execution

Preparing the orientation drawing as per site conditions.

Prepare complete documentation of quality and project

Coordinating with third party inspection Team

Preparing work orders

EDUCATIONAL CREDENTIALS

Examination

Institution

Board/University

Year

B.E.Mechanical

Engineering

KARPAGA VINAYGA COLLEGE OF ENGINEERING AND TECHNOLOGY,CHENNAI

Anna University,Chennai

2012

Higher Secondary

JAYAKERALAM HIGHER SECONDARY SCHOOL, Pulluvazhy

Kerala State Board

2007

S S L C

GOVERNMENT HIGHER SECONDARY SCHOOL,Kadayiruppu

Kerala State Board

2005

CERTIFICATION COURSE FOR QA/QC : ASNT LEVEL II

Radiography testing

Penetrant testing

Ultrasonic testing

Magnetic testing

COMPUTER KNOWLEDG

Ms Office: MS word, MS excel, Ms power point, Internet applications, Zutec,Aconex

PERSONAL SKETCH

Nationality : Indian

Date of Birth : 21SEP 1989

Marital status : Single

Religion : Christian

Passport no : L1479844

Languages known: English, Hindi, Malayalam & Tamil

Contact Tel.no : 056*******

Permanent Address: karumankottil house, allapra (po), perumbavoor, Kerala

Email ID : ***********@*****.***

Interpersonal Skills:

Smart & Conscious of Quality in Work.

Feel Comfortable to Work in Team Environment.

Ability to work well under pressure when required.

Strong analytical and Communication Skills.

Declaration:

I here declare that the particulars given above are true and correct to the best of my knowledge and belief.

Place: Abu Dhabi

MANU PATHROSE

Contact this candidate